RE: problem with a825 13/18 bell on tornado
I've got most of my parts but something is missing...
Posted on: 3/28/2009 11:16 AM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8625371

RE: problem with a825 13/18 bell on tornado
Do I also need the B070 hpi metal bushings?? Thanks again, Frank
Posted on: 3/7/2009 10:29 PM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8554581

RE: problem with a825 13/18 bell on tornado
Hi again, thanks so much for replying. Can I just use the HPI a805 pilot shaft instead of using the tubing? Is there already a link which explains the install? Thanks again!! Frank
Posted on: 3/5/2009 1:49 PM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8546786

RE: anybody already putted an hpi clutch on a smartech winner pro ?
[quote]ORIGINAL: jenfre Hi i own two on road cars one hpi rs4 evo + and a smartech winner pro , after i saw the poor quality of the smartech compare to the rs4 and that i blew out a diff and the clutch bell on the winner pro after i runned the new os cv-r engine i wanted to replace the clutch maybe the flywheel too and the clutch bell for and hpi rs4 clutch. i looked at the pitch and it looks the same the only thing i wanted to know if someone already did id and if its possible to do it which hpi parts would i need ! thank you !! [/quote] I'm going to try this soon on my two speed... it looks like a HPI A825 clutch bell, shoes, and springs will fit, I will let you know, but it may be a minute - busy single dad! Franko
Posted on: 1/14/2009 11:17 AM by Author "pushdownandturn" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=8357066

RE: Redcat Racing Volcano Thread
[quote]ORIGINAL: Jason535 thank for the info. do they make aluminum rims or durable rims for these. [/quote] No problem. The pro-line rims are plenty tough, and they made the agitator rim 40% more durable a while back. You CAN get aluminum rims but they cost an arm and a leg... the cheapest place I have found for any type of wheels or tires is ebay, do a 'title and description search' for 12mm wheels in the RC section. Or you can bite the bullet and get 12mm to 14mm wheel extension/adapters and mount 14mm wheels. You still can't run huge tires though, unless you do like me and put in a two speed tranny matched with an HPI 13 / 18 tooth STEEL clutch bell. If you really want a nice Volcano, get some T-MAXX shocks while you're at it (not the XXL or extra longs). They are just a little longer than stock Volcano shocks but fit nicely.
Posted on: 1/13/2009 11:11 PM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8355810

RE: Redcat Racing Volcano Thread
[quote]ORIGINAL: Jason535 what tires and wheels will fit my volcano. is there any aluminun rims or any durable rims and tire sets out there. [/quote] Howdy, the volcano used a 12mm hex hub so any wheel that uses a 12mm hex are good... I personally like the pro-line agitator (rear) wheels. I have them mounted on my volcano with masher 2000 tires and it rocks... and no rubbing... I wouldn't go bigger than a 5 and a 1/2 inch tall wheel unless you get wheel extensions also... Good luck - you can find the agitator rear rims fairly cheap on ebay and you can use any 2.2 type tire with them. Franko
Posted on: 1/13/2009 9:01 PM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8355322

RE: Redcat Racing Volcano Thread
Did you have any trouble with the MT2 parts install?
Posted on: 12/28/2008 11:46 PM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8292935

RE: problem with a825 13/18 bell on tornado
Which bearings did you stack, the roller bearings? Frank, long time owner, first time modder lol.
Posted on: 12/22/2008 9:02 PM by Author "pushdownandturn" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=8272715