savage 4.6 trans?
i just got the truck a week ago and have only ran 8 tanks thru it including break in. i was wondering about oiling the trans or grease ,ididnt see any thing in the manual about that
Posted on: 4/1/2010 7:26 PM by Author "r porter" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9630541

tuning new 4.6
just got my new savagex 4.6 . I did break in by the book and im on my 2nd tank of nitro after the 4 break in tanks . Going by the book i still have a far amont of nitro comin thru the pipe. has this happened to any one or do i need to go a little past what book says. Thanks for any help yall can give.
Posted on: 3/15/2010 10:14 PM by Author "r porter" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9585431

is there a diference
Is there a diference in a car nitro engine and a airplane nitro engine besides the head and could you put a airplane engine on a truck.
Posted on: 10/17/2009 10:47 PM by Author "r porter" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9181629

RE: cant get a good tune now
Thanks for the input guys and not throwing off on the fact that I am working on a .18 cxp. It is not a high dollar engine but it truly does have good power and speed. Again thank yall
Posted on: 9/21/2009 8:53 AM by Author "r porter" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9111846

cant get a good tune now
i did a port job on my cxp .18 . it turned out pretty good and it really opened up on top end eventhough i cant seem to get it dialed in . it wants to run rich . any one eles had this problem or got any ideas . or is this just something that comes along with porting
Posted on: 9/19/2009 6:19 PM by Author "r porter" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9108302

RE: ****EXCEED-RC ORDER ISSUE*****
i have a exceed infinity with the vx18 ihave been very happy with it over all. It is hard to dial in the steering onit it wants to drift a good bit but i can fix that with some shims and washers. But the reason i am writeing this is to try to find out where to find a piston and sleave for it. If u could help me with this i would realy appreciate it . Thank you for your time
Posted on: 8/29/2009 4:15 PM by Author "r porter" in the forum "Exceed RC Support - Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9054685

any one ported a vx18
i have had my sava blue infinity for a while now and was thinking of tring to port it . has any of yall tried this and if so how did it turn out . i know their was a thread on the four some where that shows step by step how to do but dont remeber where it was. i think some one took it out of the car action mag. . thanks for any help or advice you can give me .
Posted on: 8/15/2009 9:35 PM by Author "r porter" in the forum "Exceed RC Support - Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9019179

i,e porting
just saw the article on page 3 about porting i guess i should have looked first
Posted on: 5/28/2009 8:06 PM by Author "r porter" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8807175

what does porting do
I am new to rc and wondering what porting does for your engine and how do you port one. I know that is something i should not do till i learn more about rc and their engi nes. Thanks for any info yall might have
Posted on: 5/28/2009 7:59 PM by Author "r porter" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8807157

cheap parts
i have had my 1/10 infinity for about 4 months now , it is the first rc i have ever bouhgt and im starting to get the hang of driveing pretty decent now .But along the way i havw broke a couple of parts that i have replaced with new stuff from exceedrc.com . I would like to find a site with some alum. upgrades . Does any one know of any that is a little cheaper than exceeds site and maybe a few tips to get a little more power out of it. The .18 on it is pretty stout compared to some of videos ive seen on youtube of other peoples 1/10 rc,s but a little more power is always good. thanks for any help any one can give me just a newbe to all this
Posted on: 5/23/2009 4:26 PM by Author "r porter" in the forum "Exceed RC Support - Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=8792742

exceed monster truck
i have a 1/10 scale exceed infinity just wondering if any one else might have one and what you think about it . mine has realy been a lot of fun and it surprised me how tuff it is . since this is my first nitro rc i have realy beat it to death just learnig how to play with it. i just know i have heard a lot of people say they were junk but like i said i have realy been rough on it and it has held up great.[:D]
Posted on: 5/8/2009 9:45 PM by Author "r porter" in the forum "RC Monster Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=8753051