RE: Sig Hog Bipe Beginner
[quote]ORIGINAL: shepard62 FINISHED !!!! 9 months of working on it . Now it's time to pick a day for the maiden.   [/quote] Great looking Hog! You will love it, as I reminded myself how much I love mine this weekend. I have been overly busy the last couple years and unfortunately flying had to take a back seat. I've had the itch all summer to fly again, so this weekend I took the hog up to the field along with another plane. When I started assembling the hog, I realized I had left the inter-wing aileron connectors behind.......DANG! I wanted to fly it so bad. I flew my other plane a couple times but I NEEDED to fly my hog! (Light bulb went off!) I grabbed the packing tape out of my flight box, and secured the top ailerons flush with the top wing, now I had bottom ailerons only. I knew I could fly it with rudder only if the bottom ailerons weren't providing enough authority. I gritted my teeth and off she went into the most beautiful ascent I've ever seen with that 4-stroke purring away. This truly was the flight I needed to get back to flying again, my knees were weak as water I was enjoying it so much. It was a bit lazier with aileron control, but flew just as well as if I had top and bottom ailerons functioning. I came in for the best landing of my life, smooth, flawless, and straddling the center line (I owe that to the hog, not my abilities). My hog renewed my priorities with one single flight, man I love that plane! Hope you have (had) a great maiden flight with yours!
Posted on: 9/17/2012 10:30 PM by Author "r2champion" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11231967

RE: Most important part of a car?
The seat warmers.....
Posted on: 2/17/2012 8:55 PM by Author "r2champion" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10964049

RE: combat with hawk
OFCS = Grow a pair? [:D]
Posted on: 9/23/2010 2:23 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=10022321

RE: Government (temporarily) shuts down model flying in Atlanta
The thing I don't understand about all this, is that I am positive the President could fly all over this country and I guarantee that I couldn't track him from one day to the next. However, they decide to release these NOTAMS that basically pinpoint his position, at a pretty precise time. Is this really a beneficial tactic?
Posted on: 8/1/2010 1:52 AM by Author "r2champion" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9902543

RE: Just an intersting Google Earth shot....
Just a dumb plane guy here [:D] ,but to me rear plane looks substantially larger than the front one, probably meaning that these planes are separated by several thousand feet in elevation. I would say the smallest is at the lowest altitude making an approach and the other is just making a fly over to set up an approach or simply headed to a completely different destination.
Posted on: 7/16/2010 1:31 PM by Author "r2champion" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9869034

RE: Flights per year....
So far this year.....nada! [&o]
Posted on: 5/21/2010 9:31 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9750421

RE: What do you know about EC expense accounts
I don't know.....next question.
Posted on: 5/12/2010 11:30 PM by Author "r2champion" in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9730304

RE: I think I found my Tiger 60?
Hey Popriv, I am sure you have made an exhausting effort at scanning all these photos, but check out the circled area in the pic below. That, to me looks like the outline of an entire plane, yellow-ish in color. Like I said, I am sure you have scanned every pixel, probably even better quality pics than you could put on here, but this caught my eye so I thought I'd throw that out there. I hope this doesn't spark false excitement. Best of luck! Rick
Posted on: 5/10/2010 4:09 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9724202

RE: Flying log.
"Flying Log" I bet it has a stump puller of a motor huh? [8D] Sorry I couldn't help myself! [:D][;)]
Posted on: 5/10/2010 3:03 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9724064

RE: Homemade starter
While were at it, why stop at just a starter? Heck, one could even create a receptacle inside a hatch on the fuse to where you could flip the lid, clip on the battery and charge the Rx or Tx battery a little between each flight [8D]. Glow starters and fuel pumps anybody? make an attachment for them too! The R/C Black and Decker "1-for-all".
Posted on: 4/29/2010 12:44 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9697886

RE: Homemade starter
[quote]ORIGINAL: Gray Beard [quote]ORIGINAL: JohnBuckner [quote]ORIGINAL: r2champion On second thought, I wonder how hard it would be to rig your regular starter to accommodate a drill battery? [/quote] Its quite simple whats becoming popular here is using 18 volt drill batterys and simply making a plug to insert into the the batterys plug insert and thats it. This works very well. I run my three
Posted on: 4/29/2010 12:35 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9697861

RE: Homemade starter
[quote]ORIGINAL: repirazz If you want to get fancy, you can always go this route....... <a href=''http://www.hobby-lobby.com/fema.htm''>http://www.hobby-lobby.com/fema.htm <a href=''http://www.youtube.com/watch?v=tZoH_P5Z7HE''>http://www.youtube.com/watch?v=tZoH_P5Z7HE [/quote] 8 Planes x $229 = Yikes!
Posted on: 4/29/2010 10:53 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9697647

RE: Homemade starter
[quote]ORIGINAL: crossman I found the link.. http://www.afineredgemfg.com/ [/quote] Well there ya go! Of course, someone beat me to the punch (AGAIN)! [;)]
Posted on: 4/29/2010 9:39 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9697505

RE: Homemade starter
[quote]ORIGINAL: flyinrog Please, just buy a starter thats designed for the job....if money is tight, well mine is 15 years old , works fine, that means its costing me $1.25 a year to own so far....and you can usually rescue a battery from a junk motorcycle or riding mower...my tiny tower battery has lasted the same amount of time too.....and/or wait til you need several things and a discout at Tower and you may get it for free!!...Rog [/quote] I guess my second point was misunderstood. The original poster might have been looking for a cheap way to make a stater that could have been a pain. What I am referring to has nothing to do with cost. I have 3 working starters, 2 junked ones, and several battery packs for cordless drills. The original question intrigued me and made me think of something that could possibly be innovative using these items. I was just throwing out the idea of retrofitting one of these battery packs onto an existing starter, just to see if it would be practical to expand on the idea. I guess I have caught on to the whole cordless idea. I no longer use a corded phone, tv remote, glow plugs starters, drills, internet, etc. and a cordless starter would be great. I actually am quite surprised that no big name company has come up with this already due to the increasing battery technology and decreasing cost (at least I have not seen it). Considering you can buy a cordless 12V drill for $30 bucks, battery and all, I wouldn't think a battery powered stater would much exceed that. By no means am I trying to promote unsafe practices, cheap alternatives, or spending a fortune for a simple tool. But I am expanding on my train of thought. Don't forget that our hobby is based on creating things based on trial and error and has grown on new ideas. Surely I am not the only one who hates those dang cords that keep inching towards my spinning props! [:D]
Posted on: 4/29/2010 9:04 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9697449

RE: Homemade starter
On second thought, I wonder how hard it would be to rig your regular starter to accommodate a drill battery? They make the sets of tools in a pack that you can swap around a single battery to each tool and keep working. It would allow cordless starting without having to buy a battery since most have that already. I know the wiring connections would be easy, but to make a bracket that the battery would lock into would be a challenge. It seems possible, maybe not practical. It would certainly be a trick. Sounds like a craftsman's job though, I better stick with what I am good at (which isn't much!) [:D]
Posted on: 4/29/2010 8:04 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9697352

RE: Homemade starter
Seems like everyone is forgetting that battery powered drills are very common. Is there anyone here who doesn't have one? Wouldn't it be nice to just un-chuck a bit and throw on a starter shaft and head to the field? I agree that I wouldn't buy one specifically for starting my planes, but to have a cordless (keyword) drill already in my basement charging right next to my planes that are also charging is an intriguing idea. No cords to mess with, no motorcycle battery to pack around (if that's your method), no raising your hood, and no buying special Nicad packs to make one. I guess that I am at an advantage since I have a couple of old burned up starters to mess with, without risking ruining a good one.
Posted on: 4/28/2010 12:31 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9695281

RE: Crazy simulator tricks
I like doing loops as close to the ground as I can get away with. Sometimes it results in a touch-and-go at the bottom of the loop, so smooth its like nothing happened.
Posted on: 3/23/2010 10:27 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9606771

RE: Identify this plane please.
Check out this story, different scenario but eerily ironic: [link]http://www.msnbc.msn.com/id/35885646[/link]
Posted on: 3/16/2010 2:46 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9587123

RE: How to land a trainer with a loooong glide
Doesn't sound to me like anything is wrong with it, you just needs more than 60 feet of landing space and practice. Trainers are designed to give you a longer glide/low stall speed for landing, which is especially handy when it comes to perfecting dead stick landings. It seems simple to glide a plane out 200 feet or more after coming in a little too hot on a dead stick approach. With more practice with your plane, dead stick or not, you will be able to touch down wherever you wish by simply learning your planes characteristics. Also, larger wheels on your plane will help handle the rougher patches on and around your landing strip.
Posted on: 2/23/2010 10:02 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9528470

RE: What are the risks of using 44 oz-in vs. 54 servos
[quote]ORIGINAL: fcomer84 As far as I know, mfg. servo torque is with a 1'' arm on the servo. Think leverage here. A long cheater bar works way better than a short one. Use the longest one you can fit in the space you have. And, yes, most applications do not need as much torque as most folks are led to believe. [/quote] Wouldn't you gain torque using a smaller servo arm, and a longer control surface horn rather than a longer servo arm?
Posted on: 2/19/2010 4:08 PM by Author "r2champion" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9518285

RE: Good all around plane
[quote]ORIGINAL: Mr67Stang Sig Something Extra. These other guys are just crazy[:D] Everyones got their favorites[8|] [/quote] Ding! Ding! We have a winner! The Somethin' Extra is the best all around plane I've ever ever built!
Posted on: 1/29/2010 10:14 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9458146

RE: How many mistakes do you make building kits??
I don't make mistakes! [8D] (none that can be seen, anyways!) [:)]
Posted on: 1/19/2010 12:49 PM by Author "r2champion" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9429405

RE: Please, don't spend much money on
That explains all the breakfast discussions over the last couple years! Nothing better than a big breakfast after a night out!
Posted on: 12/24/2009 10:26 AM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9356577

RE: Sheeting technics
[quote]ORIGINAL: ppkk [quote] I asked on the other thread, but how messy is co-flex if you accidentally apply to much glue and it dries the co-flex to the sheeting? Is it an easily sand-able material? [/quote] If I recall correctly, in the old thread someone had suggested to wet the sheet first, put it in place and let it dry. Once dried, the sheet would already be in the desired shape, making gluing much easier. The first time I try this technic I think I'll do this to get the hang of it. [/quote] Thats exactly what I do, and is a very recommended practice. However, I still wrap the sheeting when gluing to assure the best adhesion. As for wrapping in wax paper first, sometimes the most simple ideas slip even the greatest of minds (not that mine remotely qualifies) [:D].
Posted on: 12/11/2009 2:35 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9322281

RE: Sheeting technics
I asked on the other thread, but how messy is co-flex if you accidentally apply to much glue and it dries the co-flex to the sheeting? Is it an easily sand-able material?
Posted on: 12/11/2009 1:36 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9322112

RE: NORTH CAROLINA 1/2A FLY-IN IS A GO!!!!
April 17th? Don't think I can make it, that's the day my Kentucky Wildcats will be playing for the National Championship? Oh wait....wrong forum!!!!!!![8D] [i](Ducks and runs for cover)[/i]
Posted on: 12/11/2009 11:46 AM by Author "r2champion" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9321838

RE: Favorite holiday drink?
[quote]ORIGINAL: ThunderbirdJunkie [quote]ORIGINAL: gelbschnee The first drink I had this season was a couple shots of jack poured into my dr. pepper from KFC. I guess it's now my season favorite!!! [/quote] And you didn't puke all over your Extra Crispy? ThunderbirdJunkie has found that nothing (thus far, at least) mixes well with Dr. Pepper. Unfortunate, because he always has a supply of Dr. Pepper. [/quote] Try Captain Morgans spiced with your Dr. Pepper!
Posted on: 12/8/2009 12:44 AM by Author "r2champion" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9312860

RE: kit for .26 4 stroke
Goldberg Freedom 20
Posted on: 12/6/2009 1:40 AM by Author "r2champion" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9307237

RE: Sheeting on a curve.
How bad of a mess does Co-Flex leave behind on the plane if it accidentally gets "glued" to the plane? [:D] Well....I'm a messy builder!
Posted on: 12/2/2009 10:11 PM by Author "r2champion" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9299189

RE: .25-.32 2 stroke engine choice
I will also recommend the TT Pro 36's. Great power and reliable.
Posted on: 11/27/2009 2:16 PM by Author "r2champion" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9284870