|
RE: Battery use info
Do you use a regulator?
Posted on: 5/22/2012 8:32 AM by Author "racerxwest"
in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11090375
RE: TT 40Pro endplay?
Kommander, it can't be fixed.[8|]
Posted on: 4/25/2012 12:10 PM by Author "racerxwest"
in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=11056406
RE: Quickie - Coffinator
Got my coffinater back together this weekend, not as pretty as Russo's.
Posted on: 6/6/2011 6:26 AM by Author "racerxwest"
in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=10559249
RE: Dago Red CG
Kommander why don't you post a picture of your airplane?[:D]
Posted on: 8/19/2010 3:01 PM by Author "racerxwest"
in the forum "Q-40 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=9945416
RE: What happened with Phoenix Q40 results
Still,there should be results posted?
Posted on: 3/5/2010 11:19 AM by Author "racerxwest"
in the forum "Q-40 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=9556799
Buzzard Bombshell conversion
I have a 1/2 a powered Buzzard bombshell powered with a Cox texaco engine that I would like to convert to electric. So what would a starting point for the conversion be? Motor/speed controller/battery. Thanks[;)]
Posted on: 2/11/2010 11:03 AM by Author "racerxwest"
in the forum "Electric Training"
http://www.rcuniverse.com/forum/fb.asp?m=9495465
RE: Nelson 40 ss air leak?
Try cleaning the spray bar and or the fuel filter. Also makw sure the spry bar lines up with the hole in the air valve.
Posted on: 1/3/2010 8:25 PM by Author "racerxwest"
in the forum "Q-40 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=9384342
RE: watt meter
Maximize to me is I want to fly the plane I have ( Little Toni ) at scale speed. Can't seem to get there as yet as I have tried various solutions but none has worked . Again thanks
Posted on: 12/24/2009 7:29 PM by Author "racerxwest"
in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9357830
watt meter
How do you use the watt meter to maximize your motor,esc and prop combination?? Thanks[:o]
Posted on: 12/24/2009 11:01 AM by Author "racerxwest"
in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9356669
RE: NMPRA website.
[:o] Seams to be down again.
Posted on: 4/23/2009 8:57 PM by Author "racerxwest"
in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=8709996
RE: Electric Racing Development Efforts
So what would be the final total set-up that you would recomend?
Posted on: 3/23/2009 10:08 AM by Author "racerxwest"
in the forum "Electric Pylon Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8606932
RE: Electric Racing Development Efforts
Could you post the approx. cost to convert from the TT40 to elect and a list of items needed> Thanks[;)]
Posted on: 3/7/2009 9:08 AM by Author "racerxwest"
in the forum "Electric Pylon Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8552212
RE: Low cost vacuum bagging setup
When bagging a wing does the shucks go inside the bag or on the outside? Thanks
Posted on: 2/24/2009 3:16 PM by Author "racerxwest"
in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8513506
RE: more speed!
I am stuck with the 10 inch dia for ground clearance. I have tried different props, pich and diameter with no basic increase in speed and after flying the lipo battery in just barely warm.
Posted on: 2/22/2009 1:25 PM by Author "racerxwest"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=8505313
RE: more speed!
New to electric. Seams when you go up in kv,s the prop also gets bigger. I am stuch with a 9 or 10 inch prop. Dr. Kiwi what brand and were do get a 72g Suppo 2217 k-6? Again thanks for the help.
Posted on: 2/22/2009 12:48 PM by Author "racerxwest"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=8505137
more speed!
I have a thunder tiger ripper obl 2928 outrunner;25 amp speed controler,11.1 volt lipo battery;9x7.5 prop in a 30 oz airplane.What motor do I go to for more speed? Has to be no more than 28 mm in diameter. Thanks for the help. [:(]
Posted on: 2/22/2009 9:40 AM by Author "racerxwest"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=8504470
motor combo re: 30 oz. airplane
What motor,esc,battery combo would be best for 30 oz. racing airplane. Outrunner or inrunner for best scale like racing speed?
Posted on: 2/4/2009 3:35 PM by Author "racerxwest"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=8438306
wings little toni
What motor / prop combo would be best for the 30 oz little toni to fly at racing speeds.
Posted on: 2/2/2009 3:45 PM by Author "racerxwest"
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8430594
RE: Problems with club pylon racer! (engine)
check for both screws holding the carb on.
Posted on: 5/2/2006 9:43 AM by Author "racerxwest"
in the forum "General Racing Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=4231339
Estralita
I think I have Estralita F-1 that I would like to fly but need the CG point. Thanks for the help.
Posted on: 7/8/2005 3:49 PM by Author "racerxwest"
in the forum "Q-40 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=3148519
RE: Q500 in CA?
4 or 5 from the Livermore area will also attend. thanks
Posted on: 2/4/2004 11:47 AM by Author "racerxwest"
in the forum "Q-500 Racing"
http://www.rcuniverse.com/forum/fb.asp?m=1496246
| 
