RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Back to building, started sanding Fuselage & Wings to be ready for Fiberglassing. Slow job. Also waiting for delivery of Hinges for my Switch Compartment Door and my FiberGlass Cowl. Woundering if I should install the Cockpit Kit or just leave Interior blank. I'm not looking for a real Scale Airplane just one that looks good. So many If's or No's. rcflyer35
Posted on: 9/23/2009 8:28 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9118960

RE: Saito 130TD Twin
Thanx Tom I kinda thought it would but wanted to make sure. Thanx again. rcflyer35
Posted on: 9/4/2009 9:41 AM by Author "rcflyer35" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=9069173

Saito 130TD Twin
Can any one give me infomation on the performance of the Saito 130TD Twin? I'm woundering if it has enough power to fly my H9 1/4 Scale Cub? rcflyer35
Posted on: 9/3/2009 11:31 AM by Author "rcflyer35" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=9066848

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Well I got the ST90 out and the OS60 in. Now I either have to FILL IN THE hOLE IN the Cowl or buy a Fiberglass one. I don't need the Big Hole in the side for the Head as the 60 fits inside the Cowl. I'll decide soon.
Posted on: 9/1/2009 7:22 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9062635

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Not really, still flying all I can but my next prodject on my 182 is to remove the ST91 and relace it with a OS60. rcflyer35
Posted on: 8/31/2009 11:21 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9058693

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Since our flying weather has been bad for a few days I've been working on my Models. #1) Wing installed on Cessna 182, #2) Saito 130 Twin installed on my 1/4 Scale Cub. I like to work on more than one Model at a time, that way when I lose interest in one for awhile I have another one I can go to.
Posted on: 8/14/2009 9:54 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9015720

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Someone somewhere in this Forum said the the Cessna 182 Interior was Removeable and you could Build the Interior outside of the Fuselage and Insert it after the plane was built. NOT!!!!!!!!!!!!!! Once you build the Interior ,you insert the Floor, Side Panels, Rear Bulkhead and last the Seats. As per Plan all are glued in place. rcflyer35
Posted on: 8/9/2009 9:37 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8961384

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
And Two more. rcflyer35
Posted on: 7/24/2009 6:46 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8961173

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Two more. rcflyer35
Posted on: 7/24/2009 6:40 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8961158

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Got to do alittle more work on my Cessna. Put my Switches & Glow Plug Remote in in the Baggage Compartment. Still have to buy hinges for the door. I also did alittle Interior Work. You also can see that the Wing Sits In It's Plan Position even tho I made the Fusalage A Fast Back. Pictures to follow. rcflyer35
Posted on: 7/24/2009 6:36 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8961154

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
You too. Sounds like your not going to have any trouble. Ask all the questions you want on the build and I'll answer them if I can. I'm not trying to build Scale , just somthing that looks good and Close to Scale. rcflyer35
Posted on: 7/18/2009 8:13 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8944564

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Sorry I didn't use any drawings I just did every thing by eyesite. I know thats not the convenional way of doing things but thats the way I work. The Fin and Rudder were cur at the Angle the Fin looked like the Picture of the 1956 Cessna. Example place the fin over the Plans in the Upright position and draw a Horizonale accross the Fin and Rudder. Thats where you Cut. Add a some strenthing insid the Fin and Rudder. I closed the base of the Fin and added two 1/4in. dowels to be inserted into a 1/8in. Ply Plate I'm making to be glued into the Fuselage foe added strength. I myself am Flying now and not doing much on the Model. When I do somthing on it I post it. rcflyer
Posted on: 7/18/2009 7:42 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8944508

RE: Top Flite Cessna 182 build
Steve707727 I'm buildinga Straight Tail Cessna 182. I just Bashed a regular Cessna 182. My Thread is in Kits. It's titled Kit Bashing A Cessna 182Q to a 1956 Cessna 182 . You can find Photo's of build in the tread. rcflyer35
Posted on: 7/18/2009 5:20 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8944238

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
FlyerInOkc, sorry can not do. rcflyer35
Posted on: 7/15/2009 9:07 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8935103

RE: P-51 Sliding Canopy (easy)
My Wing Span is 91in. rcflyer35
Posted on: 7/11/2009 9:33 PM by Author "rcflyer35" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8925142

RE: P-51 Sliding Canopy (easy)
It's a 1/4 Scale. 1/5 won't fit to good. rcflyer35
Posted on: 7/11/2009 7:09 PM by Author "rcflyer35" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8924849

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
, Lots of work. Well time for bed so I can get up in the morning and "FLY". rcflyer35
Posted on: 7/11/2009 5:23 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8924628

RE: P-51 Sliding Canopy (easy)
Thanx much, I'll follow your directions. rcflyer35
Posted on: 7/11/2009 3:59 PM by Author "rcflyer35" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8924469

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
FlyerInOk, My Cub is a Hanger 9 1/4 Scale. It flies like it's a Cloud in the Sky. rcflyer35
Posted on: 7/4/2009 9:06 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8905573

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
;. rcflyer35
Posted on: 7/2/2009 3:14 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8900525

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
It's a Groove painted black so the lite is visable from the front and side only. I copied it from a 1954 Cessna . rcflyer35
Posted on: 6/30/2009 8:27 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8894121

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
FlyerInOKC, I chose the Tunnel Effect for my Wing Tip Lites. There are so many Different Applications In The older Models Wing Tip Lites that it looks like the Plane's Owner could have what ever Application They Wanted. rcflyer35
Posted on: 6/29/2009 4:36 PM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8891667

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
The Wing is finished in the Bone's and joined. The Wing Tip Lights are installed. Now ready for Planking. rcflyer35
Posted on: 6/29/2009 10:04 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8890466

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Just about got the Bones of the Wing Center Section finished and have started working on the Left Wing. rcflyer35
Posted on: 6/27/2009 10:39 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8885542

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
. Again thanx. rcflyer35
Posted on: 6/21/2009 9:50 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8868811

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
I Installed The Servo's And 16oz. Fuel Tank. Finished the Forward Deck and now ready to hook up Engine Throttle. rcflyer35
Posted on: 6/20/2009 10:41 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8866787

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
The Fastback starts where the top of the Rear Window ended. The Wing lays flat there as thats where the Hold Down Bolts are on each side. Hope this helps. rcflyer35
Posted on: 6/18/2009 10:15 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8861836

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
By the Plans the Wing lays flat on the Wing Platform. My Fastback starts where the Upper Part Rear Winddow would lay, rcflyer35
Posted on: 6/18/2009 9:29 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8861713

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
Thanx. rcflyer35
Posted on: 6/18/2009 9:25 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8861705

RE: Kit Bashing a TF Cessna 182Q to a 1956 Cessna 182
if I can. rcflyer35
Posted on: 6/17/2009 10:32 AM by Author "rcflyer35" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8859068