RE: What did you get for Christmas?
Socks, pants and passion. Socks fit nice, pants were to short and the passion was great ....................... bet you thought it would have been a different answer [:D] Most important was love and friendship from family and friends [;)]
Posted on: 12/26/2009 9:59 AM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9360744

RE: CRASHES, SMASHES & BASHING!!
I love to see posts like this .............. I do carry parts for Traxxas but I don't carry the models ............. would you care to guess which model parts I have the most of? RPM parts for the ever breaking T-maxx ........... LOL
Posted on: 12/25/2009 8:14 PM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9359849

RE: The official Z-Car ZMXT-8 Z-Truggy thread
whole bunch of difference .............. l
Posted on: 12/25/2009 8:08 PM by Author "rclynx" in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=9359834

RE: Hpi Firestorm Help!
Not that a lot of guys here wouldn't know about the small block engines the Firestorm is an ST (Stadium Truck) not a Truggy [&o] What you are describing is usually an engine that is worn out. If it starts and goes to a high idle its only one thing "lean mixture" its caused by an air leak, fuel lines, fuel tank, O-rings around carb or low compression (NOT ENOUGH PRESSURE IN THE MUFFLER TO PUSH FUEL THROUGH THE CARB) I did leave out one other possibility, dirt in the carb (OOPS) Good Luck and HAPPY RC'en [color=#990033][size=7]MERRY CHRISTMAS[/size][/color]
Posted on: 12/25/2009 1:17 PM by Author "rclynx" in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=9359097

RE: Merry Christmas
[color=#990000][size=7]MERRY CHRISTMAS[/size][/color]
Posted on: 12/25/2009 3:07 AM by Author "rclynx" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9358475

RE: Xtm Xt2 .247 engine is stuck!!
Problem might have been caused with the side ways torque from when the pin was aligned wrong. For being solid metal they can be pretty touchy. With the XTM engines or SH (same thing) I have used OWB in other motors after the motor has worn out and then I have had them go bad in a few gallons of fuel ........ same as OS or Picco ......... some make it and some don't. Also all it takes is a tiny bit of dust or grit and any OWB will give up. Good Luck and HAPPY RC'en HECK ITS [color=#993333][size=7]MERRY CHRISTMAS [/size][/color]
Posted on: 12/24/2009 3:25 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9357280

RE: Merry Christmas and Happy Holidays to Everyone
Merry Christmas and a Happy New year to all [:D]
Posted on: 12/24/2009 10:14 AM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9356539

RE: check this out
Things haven't changed that much in the military as far as logistics are concerned. Someone needs to get in touch with some cargo fly boys at a NAS or AF base. If you can arrange to get the fuel to the air base I'll bet you dollars to a doughnut they will get it to its destination [:D]
Posted on: 12/24/2009 10:07 AM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9356519

RE: Walmart Warning!!
Don't know where your Pep Boys is but I'm told ours has parts also [&:]
Posted on: 12/24/2009 9:51 AM by Author "rclynx" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9356485

RE: My 100 Dollar Truggie
That was a great deal but if you threw in another $150 you could have had this [link=http://www.hobbypeople.net/gallery/147237.asp]SH ZMXT-8 [/link]
Posted on: 12/24/2009 9:46 AM by Author "rclynx" in the forum "RC Truggy"
http://www.rcuniverse.com/forum/fb.asp?m=9356479

RE: Need Nitro Buggy Suggestions
Best deal out there right now if your going to buy before the first [link=http://www.hobbypeople.net/gallery/147235.asp]SH ZMXB-8[/link]
Posted on: 12/24/2009 9:42 AM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9356464

RE: getting back into R/C
[link=http://www.hobbypeople.net/gallery/147235.asp]SH ZMXB-8[/link] this is the best you can do right now for a 1/8 buggy and your in California so parts are easy to come by [:-]
Posted on: 12/24/2009 9:37 AM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9356453

RE: Xtm Xt2 .247 engine is stuck!!
These are the parts you should be cleaning and if it still slips then replace them
Posted on: 12/24/2009 9:28 AM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9356442

RE: Little bit of white stuff in NYC
When you moving this way Eddie .................. LOL ................... here we only look at the snow hundreds of miles away [:D]
Posted on: 12/22/2009 7:49 AM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9350784

RE: Xtm Xt2 .247 engine is stuck!!
Part of the problem could be if your running a fuel with real high oil content like Traxxas fuel ............... Use a good brand of Byrons 20% or the XTM fuel and the problem almost never comes out. I personally use 25% Werks or Byrons and almost never have any problem but if I use the lower 20% with 13 or 14% oil it jumps up and bites ya. Just going to have to play with it or get a bump box, that only fails when the battery goes dead [:@]
Posted on: 12/21/2009 5:59 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9349374

RE: Official XTM X-Cellerator thread!!
[quote]ORIGINAL: Nik. The electric has a clone associated t4 rear end and a t3 front end. The nitro has a losi rear end with a t3 front. All parts should fit. [/quote] [u]Please by all means tell us rookies how that all works and how many have you converted[/u] [:'(]
Posted on: 12/21/2009 4:35 AM by Author "rclynx" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9346718

RE: Official XTM X-Cellerator thread!!
Depends on how strong a motor[:D]
Posted on: 12/20/2009 8:12 AM by Author "rclynx" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9345391

RE: Kit or RTR
Kits are made for people who enjoy a hobby..............RTR are made for sad sacks that have no ability or choose not to be a hobby person. You want RTR then don't complain about what you have like a lot of people do on these forums. [;)]
Posted on: 12/16/2009 9:13 PM by Author "rclynx" in the forum "RC Monster Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9336853

RE: Himoto Brake Upgrade
A good driver seldom needs brakes besides that why would anyone in the business want you guys to stop breaking things [:D]
Posted on: 12/16/2009 7:36 AM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9335033

RE: CEN Racing Matrix 5 1/5th scale 4wd off-road vehicles!!!!
Richie I think you should shut the whole thing about 1/5 scale down, just so I don't have to look at it and get little tingles in my toes and break out in a sweat thinking how my wife will react if I take on a line of 1/5 for the store and spend a ton of money testing and improving on one so I can tell my customers the low down on it and also have to go to another place that has a 1/5 track. Yea this is a really bad thread and I read almost every post and I could use that time for something else....................LOL................... stop me please and close it down [&:]
Posted on: 12/15/2009 7:25 PM by Author "rclynx" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9333892

RE: ofna lx one vs. ofna hyper 7 tq black vs. xtm xt2
I don't know why there would be any issues about getting XT2 parts [8|] I could build 5 or 10 of them with the parts I have on the wall and at this moment there are zero parts for the XT2 on back order ................... Oh wait ................. I think the transponder bracket is on back order [:o] [:D] But if you need one I'll find one [:D][;)]
Posted on: 12/15/2009 7:12 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9333859

RE: My new buggy(pictures)
Have you ever seen the videos that ILOVEMYXT2 posted of him doing jumps with his XT2? ................... like on the street over a full size Ford Taurus and other things like that. That Buggy will jump with the best of them [;)]
Posted on: 12/15/2009 12:42 AM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9331862

RE: please help me identify this
Picture is to blurry but it looks like a Volcano or one of those in that category. [&o]
Posted on: 12/15/2009 12:34 AM by Author "rclynx" in the forum "RC Monster Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9331844

RE: looking to buy a starter box, but which one???
X2 on the Ofna 10244
Posted on: 12/13/2009 7:08 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9328088

RE: Xtm Xt2 .247 engine is stuck!!
Yes and I still have some of the SH engines with pull start but sometimes there a pain [:-] lots for heat to the pull start will stop it also [&:] Heat gun
Posted on: 12/13/2009 7:06 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9328076

RE: ofna lx one vs. ofna hyper 7 tq black vs. xtm xt2
There damn near all the same about broken parts till you get to the real high line models, Kyosho, Mugen, Sh ZMXB-8 etc [;)]
Posted on: 12/13/2009 6:59 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9328061

RE: Xtm Xt2 .247 engine is stuck!!
If you hang the RC by its back wheels when its hot it will not cause as many problems with the OWB slipping. I use a bump start or the sure start and very little problem. If I have to clean it up I use carb cleaner and let the oil from the fuel lube it after ward.
Posted on: 12/13/2009 6:55 PM by Author "rclynx" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=9328047

RE: HimotoRacing Wolf mini heli
I'm going to rename it the missing link to Northern California ............... Trying to get something Himoto up here [X(] .............. stuck with my MASH and RAGE [;)]
Posted on: 12/13/2009 3:23 PM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9327525

RE: himoto
You and Adam staying dry down there Rich ................ raining like hell up here ............. I need one of those little Helli's but Eddie ran out [:o][:o]
Posted on: 12/13/2009 3:20 PM by Author "rclynx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9327517

RE: rate nitro redcat vortex?
[quote]ORIGINAL: lxpeery im considering buying a redcat nitro vortex ss. can anyone give me the pros and cons of this truck? it seems good, but i want something that i can plow through mud and stuff with, and something with a high top speed. cant find much about this truck anywhere. help please! [/quote] Go to the Redcat forum at the bottom of the page ................. there a helpful bunch [link=http://www.rcuniverse.com/forum/forumid_427/tt.htm]REDCAT SUPPORT[/link]
Posted on: 12/12/2009 11:47 PM by Author "rclynx" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9326137