RE: E-Jet Internaional jet fly
Yes, i witnessed it for myself on saturday and thought WT*?? Today 4 or 5 persons caught old glory as he touched-down.
Posted on: 9/13/2009 10:00 PM by Author "richardshakan" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9093359

RE: Getting some sort of glitching / Interference.
Sounds like interference or brown-outs. Try the new speed controller first. To me, it act's like an FM reciever when it loses it's signal. That is Exactly why i switched to spectrum technology. I crashed my Trex 2 or 3 times and it was horrible. It would just get a mind of it's own and power plant itself right into the ground. Wireless Routers and Cordless phones do affect fm recievers. I have not had anymore "what the heck just happened" incidents since the switch to spectrum.
Posted on: 7/5/2009 9:53 AM by Author "richardshakan" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=8907717

RE: .46 os dies, please help!!!
Also, did you replace the back cover and carb seals while you were at it? Have you tried different glow plugs? Someone in a diff forum had simular issues and they tried a #7 plug + it solved his problems. Just a thought.
Posted on: 7/5/2009 9:21 AM by Author "richardshakan" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8907689

RE: First attempt at a Tic Toc
Not bad for a first attempt. Too bad about the crash. It's minor compared to what it could have been.
Posted on: 7/5/2009 9:16 AM by Author "richardshakan" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8907681

RE: .46 os dies, please help!!!
Have you checked the fuel lines and fittings. Replace fuel lines every year or two, including the clunk line.
Posted on: 7/4/2009 5:20 PM by Author "richardshakan" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8906547

RE: os 50 hyper
You could try using a carb smart system. Are you using the correct glow plug + fuel? Check the muffler fitting for the back pressure line to fuel tank. Is it clogged?
Posted on: 5/24/2009 8:07 AM by Author "richardshakan" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8794081

RE: my 500 esp is here
I just bought one of these http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8914&Product_Name=ZIPPY_Flightmax_2650mAh_6S1P_20C.
Posted on: 5/22/2009 6:27 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8790852

RE: my 500 esp is here
Nice!!! Tail with authority. Fast climb-out. I'm considering trying that gyro on my new 50 Vibe....maybe. How did you record that video yourself ?
Posted on: 5/21/2009 5:17 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8788177

RE: my 500 esp is here
I actually built mine in early december. I put the bades on it and realized there was NO WAY i was going to even consider spooling that one up! The weather here has been lousy when i have had time to fly. Seems i have built more than I have flown this year. Make sure to fill us in on the performance of that Gyro!
Posted on: 5/14/2009 5:15 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8769130

RE: How to use an iPhone to Fly RC Airplanes and Helicopters
Sounds cool and all that. I feel that it wouldn't be a practical application for heli's. Trim's, mixes, batt life, etc. What kind of reciever is he using?
Posted on: 5/13/2009 7:30 PM by Author "richardshakan" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8766660

RE: Advice on new radio.
2.4 is the future for now. A 6 channel will do, but a seven or more opens up new possibilities for any serious Pilot. I have a JR X9303 2.4. DSM2. A computerized transmitter with 9 channels that gives pilots ease of programming, 30 model memory, and mixing and switches galore. I have three future projects already brewing, and one of them is a Nitro-3 bladed head Hirobo Chinook. Not sure what model, but my lhs can get it for me. My X9303 has 7 models in it now, so i can add my 3 planks also. And...that leaves plenty of room for future models that will require more than 7 to eight channels. My XP6102 worked fine, but the 2.4 DSM gives Assurance like never before, and there is NO waiting or impound at the field.
Posted on: 5/12/2009 10:44 PM by Author "richardshakan" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8764241

RE: trex 450 gyro issues and nose turning left in first flight
Make sure servo arm is 90 degrees to control rod. Center tail slider with 0 trim on rudder in rate mode. Be sure to check rod for no binding at all. Set travel via gyro/radio, which ever may apply.[;)
Posted on: 5/12/2009 10:23 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8764171

RE: my 500 esp is here
Oh Yea.....It's a fine machine. I had my maiden 2 weeks ago. I had a bad tail wag in hover and set her down. Have not had a chance to test after adjustments. It was my first fully blinged-out of the box heli. There is only one upgrade that i have seen as of yet.....an Aluminum anti-rotation bracket. The 500 Is one of seven heli's that i can fly outside, so i put my JR 50 Airskipper in the wind. 30 mph gusts.... and the 500 was still manageable, even though the tail ended up being not so hot . I am anxious to get er off the deck again.
Posted on: 5/12/2009 7:41 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8763726

RE: A major crash followed by mad vibration
Check the main gear for excessive run-out. It's that, or the Main Shaft. What else is left?
Posted on: 4/7/2009 8:35 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8659266

RE: TRITON 2 BATTERY CHARGER
My triton eq came with 2 balancing adaptors. Your LHS should have or can get what u need for your type of batt. You can simply buy or put together your own batt connector/adaptors. I made 2, need 2 or three more to adapt to all types of rc batts. Flight + tx nicads, flight box pb,etc. Here is a link that may help you. Know your type of connector, then buy or build. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVJW1&P=M
Posted on: 1/28/2009 8:15 AM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8410981

RE: Hughes 500D
Correction- Hitec. http://www.hitecrcd.com/servos/show?name=HS-56HB
Posted on: 1/19/2009 5:13 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8376945

RE: Hughes 500D
Try using a servo with dual mtg tabs. such as a hitech hs56hb. I encountered the same dilemma. I thought about it for awile, then search the forums-etc. Looked at a servo i had bought origionally to use for my pitch servo, and noticed the vertical mtg tab. Problem solved. mount the ball link on the under side of the servo horn, re-set-up tail pitch and your done. I also used rx foam wrapped around tailboom at exit hole of fuse to dampen and provide semistability of fuse.
Posted on: 1/19/2009 5:08 PM by Author "richardshakan" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8376928

RE: Doh cant decide on a charger
I have various lipo chargers that came with the rtf's i have purchased. Also, I have plenty of nicads & pb's to maintain. I finally decide to eliminate 4 chargers + purchased the Tritan EQ. I Couldn't be happier with it's performance.
Posted on: 1/19/2009 9:40 AM by Author "richardshakan" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=8375310

RE: Tail Servo on Heli Artist 500D w/ a 450
Here is my solution. Use sevo's with 2 mounting options, such as a Hitech HS56HB. If you are not flying 3D, a digital servo is overkill.
Posted on: 1/11/2009 1:35 PM by Author "richardshakan" in the forum "Scale RC Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8345652

RE: 25% Giles 202
Midest Products Co. Makes a 1.20 size 27% G-202.
Posted on: 8/17/2006 11:55 PM by Author "richardshakan" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=4637124

RE: extra 300s
I also have an ARF Seagull 300s. I noticed that the thrust angle is almost non-existent. I checked w/square & staight edge. Talked to LHS where i purchased it and they said to let them know what i find out online. I'm Practically addicted to this hobby, being new to RC in general. I have been educating myself by going through the diff. forums on this site, and i must admit that there is plenty to learn. So.... Can anyone recommend how much thrust angle is needed to get me in the air.
Posted on: 8/13/2006 12:16 PM by Author "richardshakan" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=4617297

RE: Worldmodels Ultimate 40S
I'm new to this addiction. I Have an almost done 40S w/saito 72. From all reviews read, this plane should be excellent to fly. I have found 2 reviews that point out CG differences compared to the manuals 3.74. One review states 3 inches from upper wing tip, another says 3.2. I also have a shuttle 30/50 evolution-37 OS-GY401/S9254,JR770PCM. T-REX-XL w/many upgrades. The planes just looks awesome with True turn polished spinner.
Posted on: 7/26/2006 7:53 PM by Author "richardshakan" in the forum "Sport Flying"
http://www.rcuniverse.com/forum/fb.asp?m=4548689