|
Ofna Picco .21b #51210 Help
Hi,i just finish the break-in of my new Ofna Picco .21b 1/8 buggy,byt dont know a good setup to run it perfectly calibrated of gas/air, right now the engine got 3 1/2 turns from close but the buggy got a slow aceleration and a very smoking top,can anyone got the final adjustments or kow it after make the break-in ? oh and if got a good gears combination plz let me know.Thanks
Posted on: 10/18/2009 12:34 AM by Author "OFNA_Rookie"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9181855
RE: Please Preregister for Sulphur, LA Contest
We'll be there also Randy Hicks Sportsman 2.4 James Henry Sportsman 18
Posted on: 9/25/2009 10:58 AM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9122932
RE: YS110FZ-S won't quit
Guttorm I had the same symtoms that you are describing. The gasket on the rear air chamber was sucked in causing an air leak. I changed the gasket and the problem went away. I hope this helps Randy
Posted on: 9/11/2009 8:28 AM by Author "ROOKIE PILOT"
in the forum "YS Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=9086413
RE: Southwest Louisiana Pattern Contest
Myself and Jim Henry are planning on being there and flying sportsman. Looking foward to it. Randy Hicks
Posted on: 9/9/2009 8:36 AM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9081140
RE: Boomerang Nano!!!
My Navy Nano is Sweet too !!![:D][:)][:D][:)][:D][:)][:D]
Posted on: 7/23/2009 11:15 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8957522
RE: Crowley contest
I would like to thank the RAMS club members and all of the other competitors for making me feel so welcome for my first pattern event. I had a great time and I am looking forward to seeing everyone in Crosby TX. Randy Hicks
Posted on: 5/19/2009 2:16 PM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8782041
I just bought a HPI RS4 EVO+ * HELP *
recommendations to a nitro ROOKIE - Thanks so much :-)
Posted on: 5/16/2009 8:19 AM by Author "nitro_rookie"
in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=8773398
RE: Boomerang Sprint Build Thread!
Well guy's, there are several Sprints. Xl's, Elans, and Baby Boomerang jets here in my club and no has had any problems building any of them. Most of the guys have build there jets with in a week and in the air by the weekend. Also we have three new jet jocks waiting on the new Nano to arrive. So the answer is "YES" i will buy another boomerang product with out thinking twice.[:)][:D][:)][:D][:)][:D]
Posted on: 5/13/2009 10:29 PM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8767135
RE: Boomerang Nano!!!
Siclick33, it sounds like you need to upgrade your turbine unless you scratch build your own model. Not trying to start anything but the Nano is for more than just a 7lb turbine. That is why Wren had to update to keep up with the market. [:)][:)] Thanks
Posted on: 4/22/2009 2:58 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8704268
RE: *** TURBINE TRAINER CHEAP ? **
U can have a Boomerage Sprint or Baby put together in 3-4 days and it is easy to build.
Posted on: 4/19/2009 4:06 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8694843
RE: *** TURBINE TRAINER CHEAP ? **
www.boomerangjets.com
Posted on: 4/17/2009 12:22 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8688851
RE: Banana hobbie's new f18
Who is the supplier that you got your from ?
Posted on: 4/9/2009 8:51 PM by Author "G-ROOKIE"
in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8665945
RE: •California Jets 2009•
Here is some pic's that i took.
Posted on: 4/6/2009 11:39 PM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8656535
RE: ALI IN CALI PHOTOS
.
Posted on: 4/5/2009 4:13 PM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8651273
RE: Exceed RC F/A 18C Help
Hello. Today the same thing has happened to me when i had just finished my Nitro Plane F/A 18 Hornet. While checking the servos and motor, the blades and cone came a loose and broke all the blades while testing the motor. I have only had the plane for a week and today was a good day to finish and test this baby out. Has anyone use a diffrent set of Blades with this plane ? I will be waiting on Nitro Planes to respond about this problem !!!!!!![:)][:)][:)]
Posted on: 3/29/2009 8:40 PM by Author "G-ROOKIE"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=8629427
RE: Banana Hobby
I agee with you Repomanth, that why i try to find another co. and the reply fast.
Posted on: 3/15/2009 11:07 PM by Author "G-ROOKIE"
in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8582122
RE: AMT 180 home made conversion to electric start
What size battery are you all are using with the JJ1800 6.0v motor ?
Posted on: 3/1/2009 9:36 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8531066
RE: ECU setting
Go to www.jetjoeus.com and those guys can help you. [:D]
Posted on: 3/1/2009 9:33 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8531055
RE: AMT 180 home made conversion to electric start
Hello Guys, Is it better to go with a JJ1400 bullet to save on weight ? Also why choose the JJ1800 verses the JJ1400 ?
Posted on: 2/27/2009 3:18 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8523534
RE: Best stater jet
[size=3]Go to www.boomerangjets.com and give Patricia Cardash a call. [:D][:D][:D][/size]
Posted on: 11/22/2008 8:35 AM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8171656
RE: BOOMERANG XL RADIO SET UP ?
I use Hitec (HS-5985, 5945, 5645) and Jr.'s (ST-126mg on Flaps) servos in my XL. [:D][:D][:D]
Posted on: 10/31/2008 12:37 PM by Author "G-ROOKIE"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8101904
RE: best engine for buggy
[quote]ORIGINAL: chookman46 RB WS7.......Its super reliable, last forever and I believe has the best overall output for a buggy. Great top end and with lighter clutch shoes (heavier springs) it has and explosive bottom end. [/quote] Yep Ws7 last over 12 gallons and still counting lol[X(]
Posted on: 9/1/2008 11:05 AM by Author "Rookie__Racer"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=7907887
CO2 for retracts
Is anyone using CO2 for their pneumatic retracts. When I used to drag race we always used CO2 in our air shifters to eliminate moisture from the compressed air which can lead to corrosion and a possible malfunction.
Posted on: 7/29/2008 3:45 PM by Author "ROOKIE PILOT"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7785196
RE: Focus Sport 110 YS Powered
Yes I did use automotive paint. It was dupont Chroma premier with 72500s clear.
Posted on: 7/18/2008 9:03 AM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7744466
RE: Focus Sport 110 YS Powered
9.5 lbs, It's completely glassed and painted. I think I got a little carried away on the clearcoat so it's a little heavy but it looks really slick and it still flies great with the YS 110. This was may first painted airplane so I'm sure I can make the next one lighter.
Posted on: 7/17/2008 4:36 PM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7741867
RE: Focus Sport 110 YS Powered
Just finished my Focus Sport, Great flying plane. Here are a few photos.
Posted on: 7/17/2008 3:43 PM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7741679
RE: post some pictures of your pattern plane!!
Thanks I appreciate the complement, But it's not covered. I glassed and painted it.
Posted on: 7/14/2008 10:51 AM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7729142
RE: post some pictures of your pattern plane!!
Here is a photo of my new Focus Sport. It had it's maiden flight this weekend, Great flying plane.
Posted on: 7/14/2008 10:13 AM by Author "ROOKIE PILOT"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7729019
RE: MalayAsian Hangar
Tianci, I had a swell time at KKB. Welll done on the excellent event. Please sign me up for the next one. It would be fantastic if we can do KKB on a regular basis like maybe once a month. Game anyone? I will try and upload some pix I took later. Thanks for the swell photos, SW, Mech & Tianci. Good job. RR
Posted on: 6/10/2008 1:28 AM by Author "radio rookie"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=7601677
RE: ECU failsafe with 9C/FASST
This is what i do for all of my jets using the 9C. First go into your ECU and reteach the radio program by setting the trim and stick all the way up for the high position. Second for the low position, keep the throttle trim all up & the lower the stick down. Go in to your 9C throttle program and set it at 40% and assign to switch H. This will only be done in the low idle setting. The ECU will lower it when the stick is down but it will not cut off until until you hit the assign switch while the throttle stick is the down position. Hope this helps !!!!!! [:)][:)][:)][:)]
Posted on: 6/8/2008 4:30 PM by Author "G-ROOKIE"
in the forum "JetCat Turbine Direct Support"
http://www.rcuniverse.com/forum/fb.asp?m=7595148
| 
