|
RE: Melting spur gears.
make sure that your engine mounts are down tight and they are not moving. it happened to me that everytime I set the gear mesh perfect, the motor would move and I would strip a gear. Loc-tite it and your good
Posted on: 3/1/2004 3:42 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1579954
What kind of pipe?
What pipe do you suggest I put on the TRX 2.5 engine? I am looking for bottom end and acceleration. I was thinking about the MIP Side Stinger Pipe. Since the 360 Stinger Pipe is a really good pipe but is very unstable I was thinking the side one for more stability. What do you think? Thanks for your opinion!![:D]
Posted on: 2/26/2004 6:19 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1568031
RE: Best priced place to buy T-Maxx?
www.ultimatehobbies.com....379.99 Cheapest I have seen. Free Shipping also
Posted on: 2/23/2004 2:53 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1556778
RE: 2.5 CVEC exhaust
Personally, IMO I think that it is a waste of time because EVERY time you go out and bash you have to tune because the CVEC is one of the few tuneable pipes. My friend had it and said it was a waste of money and his time. If you think you are up for the hassle then get it but otherwise I would say NO. Hope it helps
Posted on: 2/22/2004 12:07 AM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1552134
Receiver Voltage
What voltage do the TMAXX receivers run on? Im curious cause my cousin has a few Li-Poly batteries around and will give me one but I might need a voltage regulator. Thanks for the help :-D
Posted on: 2/20/2004 1:09 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1547448
RE: Sirio in old Maxx?
I would try the O.S .40 Engine in it. It will be more power and I am for sure that it will fit [:D]
Posted on: 2/15/2004 9:00 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531602
RE: dirty stinking rotten tricks :D
Hmm I wonder if this would really work. Has anybody ACTUALLY tried it before? IMO I do not think it would work.
Posted on: 2/15/2004 8:58 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531597
RE: Video Cammera for Truck?
the planrite trading compandy makes a tiny wireless video camera for R/C. They can be viewed from any TV and even has color. What are you planning on using it for. 120 dollars seems like alot of money for those
Posted on: 2/15/2004 8:55 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531589
RE: MY FIRST TMAXX TWIN ENGINE VIDEO!!
sweet video....nice editing
Posted on: 2/15/2004 8:53 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531583
RE: I need help with the fuel in the Tmaxx!!!!!!!!!!.
supposedly the traxxas top fuel is the best thing made for the TMAXX...try it
Posted on: 2/15/2004 8:52 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531580
RE: T-Maxx Charge-in Jack
actually you can leave the wires out, get a wall charger and WAAALAA...it charges [;)]
Posted on: 2/15/2004 8:48 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531566
RE: takes 1/2 throttle to start engine
This happened to me and it turns out that I was missing the exhaust gasket. I replaced that and WAAALAA. Everything is perfect again. [;)]
Posted on: 2/15/2004 8:47 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531556
RE: Parallel or series???
hmm good questionb[8|]
Posted on: 2/15/2004 8:45 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531552
RE: First thing to upgrade question
get a new tuned pipe. The stock plastic one sux
Posted on: 2/15/2004 8:44 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531549
RE: gearing down the Emaxx
Your best bet would be to look at [link=http://www.towerhobbies.com]Tower Hobbies[/link]...most likely if you cant find it there...you might NOT find it...Good Luck
Posted on: 2/15/2004 8:44 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531546
RE: truck wont move forward!
this happened to me once on my Duratrax Max ST PRO (PIECE OF SH*T BTW!!) and it turned out that all I needed to do is replace the gears. Easy 5 dollars [:)] Hope it gets fixed
Posted on: 2/15/2004 8:40 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531531
RE: Show of your Maxxes
I have a NEW IN BOX TMAXX coming soon (ordering within the next month) and im getting a MIP Side Stinger Pipe and probably a custom paintjob. I will post pics of it when it comes. :-D
Posted on: 2/15/2004 8:39 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531528
RE: super charger
as far as i know....most of those Boost Bottles by MIP and the SuperChargers do [u]not[/u] work. I have heard many reviews and they all say that they are a waste of money. If you want to try it go ahead and risk the chance of your money.
Posted on: 2/15/2004 8:37 PM by Author "schaumie2222"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1531521
RE: T-Maxx Charge-in Jack
hmm....just seems like you have a wire hanging out....no offense but I think that we all do this because taking the battery pack out is such a hassle...good job though?!
Posted on: 2/15/2004 8:30 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531497
RE: tire & wheel glue that works with aluminum wheels?
how about Liquid Nails Its almost like caulk and can be found at any hardware store in the giant tubes. It is strong as a mofo!!
Posted on: 2/15/2004 8:14 PM by Author "schaumie2222"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=1531436
Help Engine Trouble!
Heres the problem....about 2 months ago my engine mounts came loose and I stripped the spur and cluth gears 2 times... Now that i have replaced them my engine will run and the crankshaft will spin but the car will not go...........PLEASE HELP :mad: :confused:
Posted on: 7/28/2003 11:15 PM by Author "schaumie2222"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=1001319
| 
