Rc forums in CANADA?
Besides rccanada is there any other major rc sites based in canada? cause i have had bad experience with rccanada : from getting banned for no reasons , tried to join back they ignored me for several year , after being a good member since 2006... thats enough for me also when i saw that they Re-instate well known theifs , and paypal frauds , before myself i dont want to be appart of that gang it's too much fucked up ;) let me know what you guys have :) maybe im missing something good thanks!
Posted on: 4/1/2012 8:28 AM by Author "sebhitman" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11023595

Rccanada
I have burried the hatchet with them! going back asap! thanks rccanada! for taking time to understand & email me!
Posted on: 11/30/2011 12:11 PM by Author "sebhitman" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10784562

RE: Rccanada
I have burried the hatchet with them! going back asap! thanks rccanada! for taking time to understand & email me! close this un-useful thread thanks guys! will be more careful next time
Posted on: 11/30/2011 12:10 PM by Author "sebhitman" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10836576

RE: Rccanada
I have burried the hatchet with them! going back asap! thanks rccanada! for taking time to understand & email me!
Posted on: 11/30/2011 12:10 PM by Author "sebhitman" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10831705

RE: IS RCCANADA site down?
I would like to adress this to rccanada I said some bad things about them , now i cannot retract the messages i left on here i hope the moderators can help me remove the messages I finally talked to someone of rccanada , and burried the hatchet , and i want to apolagige for anything offensive i could of said about them! as a matter of fact it's the only & the largest rc site of canada! sorry again! let's move on!
Posted on: 11/30/2011 12:06 PM by Author "sebhitman" in the forum "M.A.A.C."
http://www.rcuniverse.com/forum/fb.asp?m=10836568

RE: Rccanada
I want to fix this issue....
Posted on: 11/27/2011 3:36 PM by Author "sebhitman" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10831732

RE: IS RCCANADA site down?
What is wrong with the owner of RCCANADA seriously and his flock of moderators? Been banned for NO REASONS WHAT SO EVER tried to help someone that got ripped off, been sent a false negative feedback , asked the moderators to pull it out they told me to shut up , i told them it was plain stupid Im banned ever since at first i thought it was a joke or i has trouble with my account tried to do a new account using my Real life name... and they thought i was Trolling...?? (dont even know what that means im from quebec and speak french) they cuss me off and never let me back in. even though i have 100% feedbacks all over the place on every rc forums i go on and before that i had like 6 good feeds on rccanada.... was a member since 2006.......... !????????????
Posted on: 11/21/2011 10:13 PM by Author "sebhitman" in the forum "M.A.A.C."
http://www.rcuniverse.com/forum/fb.asp?m=10823323

RE: Rccanada
sure but selling locally is fun to save some $$$$ i dunno why they acted like such jerks seriously it's pure non sens
Posted on: 10/29/2011 7:43 PM by Author "sebhitman" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10788742

RE: Camber gauge problem
Thanks! ill look into that appreciate it!
Posted on: 3/24/2011 10:45 PM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10421222

RE: Camber gauge problem
do you have a tutorial page where they advise what rim to take or how to make them? maybe there's specific rims that are flat enough i think i saw that somewhere on a ON-ROAD rc forum
Posted on: 3/24/2011 10:18 PM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10421198

RE: Camber gauge problem
Damn do they make those still? or they are rare discontinued?
Posted on: 3/24/2011 9:57 PM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10421167

RE: Camber gauge problem
I dropped the truck each time i measured maybe 6 inch from the ground or 8 inch not sure I saw a video on youtube from a Team losi team driver so i did this trick still no luck.. i really dunno what im doing wrong there it's total confusion
Posted on: 3/22/2011 6:00 PM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10416636

Camber gauge problem
hey guys im trying to make adjustements on my Camber using Duratrax pit tech camber gauge... I set the Degree i want to get then mesure & check if im near the degree i want to acheive Im trying this on a stock SC10 brushless , and a hyper10tt Im not even able to get the same reading on the stock sc10..... it was factory assembled how's that i can't even get to put negative 1 on my hyper 10 tt aswell.. with the pivot anything i try won't work.... i really dunno this isn't rocket science ..... maybe my gauge isn't good? but it's pretty impossible to never have the same reading twice even if i didn't re-tune the wheels....
Posted on: 3/22/2011 5:32 PM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10416579

RE: IS RCCANADA site down?
pipercubflyer : same thing Rccanada doesn't care about their users when you are too present on their site they take you down for the count for non reason they prefer to have theifs running around their forums than GOOD USERS , PROUD USERs , POWER USERS , and veteran hobby quality user it's one of the worse sitei have ever been hobby wise! and all it does it give CANADIAN a bad name cause us members will go there and have a rough time and won't appreciate the stay i can garantee that long live RC UNIVERSE where all the real hobby people are ! i can't thank you guys enough for taking me under your wing since day one! been a member since 2006 i had deals among deals there , even before the feedback system was implanted , they trash you like there's no limit , the mods there webmaster is among the most slow stupid thing i have ever seen they never do anything about anything they just talk & take time to write back i will tell all my hobby friend / shops about those stories and ill probably have nearly 100 users out of this site in no time if i want to
Posted on: 11/25/2010 11:03 PM by Author "sebhitman" in the forum "M.A.A.C."
http://www.rcuniverse.com/forum/fb.asp?m=10160050

RE: MIP DIFF ON BLITZ ESE PROBLEM (PICTURE INSIDE)
i used the wrong , washers , cause the manual had a bad explication thats why they gave a extra page in the box wich i saw too late.... so i screwed it too much and the black thing that you screw is probably too much worn
Posted on: 11/9/2010 12:30 AM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10123862

MIP DIFF ON BLITZ ESE PROBLEM (PICTURE INSIDE)
i finished my ese today i was thrilled finally got my mip diff inside after breaking my hpi one while building it..... look what i got now as a problem... noticed that right at the end 'YAYYYYY' Look at the picture here [img]http://img529.imageshack.us/img529/5350/img1284u.jpg[/img] and they said it was a perfect fit?....... isn't the dogbone supposed to be way up there not on the edge of falling!
Posted on: 11/8/2010 8:40 PM by Author "sebhitman" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10123431

RE: Sprint 2 flux cannot run straight always goes left or right too much?!
wow what a long delay before i posted back what about 0 degree camber everywhere would that stop the problem?
Posted on: 11/2/2010 11:05 PM by Author "sebhitman" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=10112279

How to wire leds to 3rd channel?
hey guys i have done some led system to my rustler vxl lately basicly i just put 2x 9V batterys on the deck of the car & tape it there & remove when im done i would like to do something better like have something more professional like power the leds directly from the main battery inside the car i would like something as bright as it can be....but not drain my battery faster .. by doing so. i need to be able to switch them on & off with the 3rd channel does anyone have a schema to show me how to do it??? also would it be hard to have lights react to what you do like breaking rear glows bigger ... , turning left the flasher comes in play?
Posted on: 10/24/2010 11:35 PM by Author "sebhitman" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10092102

RE: IS RCCANADA site down?
I also hate rccanada the politics there is about as crappy as it can be for instance Veteran users have less power than first time posters You can leave anyone anytime a bad feedback and the admin won't even budge even if the guy did it on purpose cause he hates the fact you posted he was overpriced on his add it's a crappy site to avoid at all cost if your just a casual reader go ahead lots of great folks in the flying division of the site..... but in the rc cars truck don't even go there you will step on a land mine i have been a member for 5 years + and never going back selling there or posting
Posted on: 10/24/2010 4:20 PM by Author "sebhitman" in the forum "M.A.A.C."
http://www.rcuniverse.com/forum/fb.asp?m=10090961

good / bad traders seller
i got bitten by a user here i would like to give him a rating , i sent him 200$ never heard from him since , we are on paypal claim for him now I would like to point him out to watch out for him can someome point me to the right place?? thanks!
Posted on: 10/13/2010 1:16 PM by Author "sebhitman" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10066241

RE: HOW TO USE A SLIDE CARB ON RS4 3 .18 OSV
can anyone teach me? this is the first time doing such a thing , ill be good to teach others at the track later : )
Posted on: 9/2/2010 11:59 PM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9977518

RE: HOW TO USE A SLIDE CARB ON RS4 3 .18 OSV
yeah i tried to turn the ''ball on the motor '' but it doesn't make any easier
Posted on: 9/2/2010 8:38 PM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9977153

HOW TO USE A SLIDE CARB ON RS4 3 .18 OSV
I have a .18 os installed on my rs4 3 , how can i use the slide carb version..... of the .18 os with this car can't seem to find a way with every servo horns i have it's a total pain in the butt to be postpone like this
Posted on: 9/2/2010 8:06 PM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9977088

RE: Rs4 3 won't shift?
thanks guys , ill try to adjust it , what screwdriver do i need?
Posted on: 8/31/2010 12:11 AM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9970783

RE: Rs4 3 won't shift?
hey cool mec tu vien de sorel haha , Yeah this is the first time im experiencing so much trouble with a rs4 3 evo never had 1 issue in the pass ,
Posted on: 8/27/2010 4:09 PM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9963882

Rs4 3 won't shift?
I did the break in perfectly I installed a new carburator because i suspected the stock factory one had a problem then im trying to tune the engine from stock settings I can get it to go very fast from 200 to 230 F , but doesn't shift at all... well maybe it shift VERY LATE but i don't have enough space to run it long Normally a rs4 3 evo + is supposed to shift quite quick... if i remember correctly
Posted on: 8/27/2010 3:58 PM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9963860

RE: Sprint 2 flux cannot run straight always goes left or right too much?!
Oh I see , I have tried it today , changed servo even! for a spektrum digital ...... and same thing occured! I floored it AND WHAM! LEFT OR RIGHT this is very dangerous! because i do 1/4 throttle then 1/2 then FULL and when full im suposed to be straight just like im used to with my rustler but no this one aims for the CURB! , how can i remedy it? please point me a thred section ill read it up but the flux thread is kinda big and about camber i don't know anything about it i have a cheap camber reader from duratrax tho
Posted on: 8/16/2010 6:51 PM by Author "sebhitman" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=9938226

RE: Sprint 2 flux cannot run straight always goes left or right too much?!
i try that now
Posted on: 8/12/2010 12:20 PM by Author "sebhitman" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=9928623

Sprint 2 flux cannot run straight always goes left or right too much?!
My sprint 2 flux is brand new I have aligned the steering on the controller , and when ever i try to floor it it wants to go either left full or sometimes right making it VERY UNSTABLE how can i remedy that?
Posted on: 8/12/2010 1:16 AM by Author "sebhitman" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=9927852

RE: rs4 3 idle problem how to set it up?
I think ill rma the car , because I have found out the carb leaks.... and like i said theres something wrong with the car , it isn't just right I had 6 of them in the past i never had so much trouble with anyone of them ill try to take a pic of the carburator opening side notch.... youll see im pretty sure it aint supposed to be there
Posted on: 8/8/2010 5:54 PM by Author "sebhitman" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9919325