3W-42i prop set up
Just got a 3W-42i. What is the correct position in relation to the sensor and magnet in the hub? (i.e. is the prop 90 degrees from the magnet, 60?) thanks
Posted on: 1/18/2012 8:54 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10915141

The new DX8 vs the new 8FGAS
Its down to these two. quality an reliability are most important along with customer service.
Posted on: 1/16/2012 8:14 AM by Author "sgtshultz" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10911461

RE: Futaba 7C 2.4 vs 8FGA 2.4
Another question. S-FHSS VS FASST?
Posted on: 1/15/2012 4:35 AM by Author "sgtshultz" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10909501

RE: Futaba 7C 2.4 vs 8FGA 2.4
Thanks. What about spectrum ? Seeing a LOT of those at the fields.
Posted on: 1/15/2012 4:16 AM by Author "sgtshultz" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10909495

RE: Futaba 7C 2.4 vs 8FGA 2.4
T8J?
Posted on: 1/14/2012 4:23 PM by Author "sgtshultz" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10908942

Futaba 7C 2.4 vs 8FGA 2.4
what are the signifcant differneces (besides the 1 channel)? I understand you can extend the number of servos used with the 8 channel. are there any others?
Posted on: 1/14/2012 10:11 AM by Author "sgtshultz" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10908444

RE: G-23 spark plug gap setting
Why .20?
Posted on: 12/28/2011 8:50 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10880638

G-23 spark plug gap setting
what is the best gap setting for the G-23 spark plug NKG - BMR7A thanks
Posted on: 12/28/2011 6:51 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10880478

RE: inverted muffler for G-23
mounted inverted (cylinder down). need it to go straight down (not wrap around). I know there are mufflers for sale by folks like J-Tec. I was hoping to find someone looking to get rid of one they weren't using and save some bucks. thanks scott
Posted on: 12/28/2011 5:40 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10880365

RE: inverted muffler for G-23
Ok. What am I missing. I know it can be ran as is because I'm doing it now. Enlighten me.
Posted on: 12/28/2011 5:24 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10880341

RE: inverted muffler for G-23
If you compare it to the G26, you can see what I am referring to.
Posted on: 12/28/2011 4:14 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10880231

inverted muffler for G-23
I need an inverted muffler for a zenoah G-23. thanks
Posted on: 12/28/2011 12:34 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10879942

RCGF 20cc : beam mount vs rear mount
I noticed there is now a version three on the rear mount 20cc. My main question is why are there different carbs on these same size engines from the same manufacture Which is better for reliability ? Thanks
Posted on: 12/22/2011 11:49 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10872520

G23 bearing removal
So how do you remove the bearings (mainly front two) on a G23? Also, the woodruff key is stuck.
Posted on: 12/20/2011 4:26 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10868836

Looking for ideas on a kit to build.
Looking for a kit to build to match up with a DLE 30. Prefer a laser cut kit that's easy to set up and break down at the field. I like the classic looks of the older airplanes. Waco. WWI Older experimental like the Fly Baby bipe. Tiger moth maybe? Thanks
Posted on: 12/18/2011 5:15 AM by Author "sgtshultz" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10864664

RE: DLE30 popong during flight
Thanks again. Do valltage regulators reduce the charge time in anyway? Sounds like a good way to keeps things more consistent for the engine.
Posted on: 12/16/2011 10:24 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10862447

RE: DLE30 popong during flight
Got the new plug. Still popping. 6v.
Posted on: 12/16/2011 7:29 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10862226

RE: DLE30 popong during flight
thanks any other suggestions for this engine? what about a muffler that actually muffles?
Posted on: 12/16/2011 5:38 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10862085

DLE30 popong during flight
My still breaking in DLE30 is making a popping noise (not as loud as a backfire) during normal flight. What causes this? What can be done to correct? Thanks
Posted on: 12/16/2011 3:46 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10861999

RE: I need a G23A crankshaft .
Thanks. Any tips on how to straighten it?
Posted on: 12/15/2011 5:38 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10860513

RE: I need a G23A crankshaft .
Thanks, but how will that help my bent crank problem?
Posted on: 12/15/2011 4:48 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10860467

I need a G23A crankshaft .
Looking for a 'straight' crankshaft for a G23A. Thanks.
Posted on: 12/15/2011 3:07 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10860408

RE: G-23 prop hub removal
Thanks!! Now, do you know where I can get a straight crank shaft for it? Also, is the prop shaft regular thread or reversed? Tried th rope thing and it wouldn't come off.
Posted on: 12/15/2011 3:04 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10860405

G-23 prop hub removal
I give up. Gape do you get the prop hub off a zenoah G-23?
Posted on: 12/14/2011 6:45 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10860012

RE: G-23 idle issues
Thanks. But it really sounds like rubber rubbing against the hub.
Posted on: 12/14/2011 10:24 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10859231

RE: G-23 idle issues
No leaking. Just squeaking. Thanks
Posted on: 12/14/2011 8:18 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10859052

RE: G-23 idle issues
Any thought about the front shaft seal squeaking right after a run?
Posted on: 12/14/2011 7:25 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10858975

RE: G-23 idle issues
Thanks everyone. I'll be giving it a try.
Posted on: 12/14/2011 7:24 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10858970

RE: G-23 idle issues
16x6 top flight About 2,600 to keep it from quitting. Thanks
Posted on: 12/14/2011 6:28 AM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10858895

RE: G-23 idle issues
The gas I was using wasnt old. But not new either. I'll give it a try. And will leave out the treatment. Thanks.
Posted on: 12/13/2011 6:52 PM by Author "sgtshultz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10858395