RE: Futaba mz 14 Fully integrated 2.4???
12+2 Channels will not made 8FG to 12FG. I own 12FG and my friend has 8FG. It's big difference in functionality.
Posted on: 11/21/2010 12:33 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10149524

RE: Futaba mz 14 Fully integrated 2.4???
Maybe 14MZ, 12Z, 12FG will become update for 16 channels. It's been confirmed that 8FG will become update for 12+2 channels.
Posted on: 11/21/2010 9:50 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10149207

RE: trainer cord 12fg to 8fg
Ok thank you. No we will use only with these radios. I know that i should not use trainer cord when battery pack is different.
Posted on: 10/13/2010 12:02 PM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=10066095

trainer cord 12fg to 8fg
Hello. I have a question if this trainer cord will work between 12fg and 8fg. And also between 8fg and another 8fg? http://www.gpdealera.com/cgi-bin/wgainf100p.pgm?I=FUTM4415 Stock Number FUTM4415 Manufacturer Number MMTC Thank you
Posted on: 10/13/2010 6:37 AM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=10065624

RE: How to change the area code in a Futaba T14MZ!
It's not virus. This stuff is old. I have seen that last year that somebody changed area code on 14mz.
Posted on: 10/12/2009 5:42 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=9165913

RE: Gold dotted Futaba 608FS and 6014FS 2.4 Rx
Gold dotted 6014 has 3V signal on all 14 outputs. Info from Robbe. I don't know why in US they are hidding these informations.
Posted on: 3/26/2009 9:20 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8618117

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Thank's Mike mode4 is good enough for me.
Posted on: 3/19/2009 6:49 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8595228

RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
One question for HITEC stuff. Will it be possible to select STICK MODE 4 in menu. If i buy MODE 2 then it should be simple to change to mode4. Only ailerons and rudder are changed. Please make that function in software. Here in europe futaba, graupner, multiplex have that function in their transmiters.
Posted on: 3/19/2009 5:36 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8595036

FUTABA SERVO BLS 452 MG DIGITAL BRUSHLESS in carden yak 89"
I have a question for these servos. FUTABA SERVO BLS 452 MG DIGITAL BRUSHLESS. I saw on internet that these are made for car use. This is the Futaba BLS452 Brushless Digital High Torque, High Speed Servo. BLS452 is designed for steering in nitro or electric on and off-road vehicles Can i use it in my hangar 9 YAK 54 89" ? Or should i get some other servos for airplane use? thank you
Posted on: 10/14/2008 3:40 PM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=8048591

RE: Mutliple Battery Inputs on 6014 receiver
So that mean that i can connect 2 battery to the receiver without any switch between them. I just plug 2 x 4.8V battery. One to port Battery and other to any other port? thank you
Posted on: 10/9/2008 5:14 PM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=8034065

RE: Futaba 6014 heat failure (crash)
[quote]ORIGINAL: rajul [quote]ORIGINAL: skorp_jon In europe there is a recall of HF-Modul TM 14 2,4 GHz Seriennummer: 08430001 to 08432345 and 08440001 to 08442504 If u have this module and your buddy is flying also with fasst near you. Then you can get servo glitch sometimes. [/quote] Could you post the link to this announcement? Thx [/quote] http://forum.robbe.com/viewtopic.php?t=477 If u
Posted on: 10/1/2008 2:47 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8007863

RE: Futaba 6014 heat failure (crash)
In europe there is a recall of HF-Modul TM 14 2,4 GHz Seriennummer: 08430001 to 08432345 and 08440001 to 08442504 If u have this module and your buddy is flying also with fasst near you. Then you can get servo glitch sometimes.
Posted on: 9/30/2008 1:14 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8005468

RE: Auto Landing with a locked out Spectrum
Lucky guy. Once i ran out of my battery and i crashed my tail off. But it was old 40Mhz system.
Posted on: 9/29/2008 3:20 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8002275

RE: weatronic 2.4 Dual FHSS RC systems launched
I believe that this works ok, but why is it so ugly ? I don't wanna have some box in front of my transmitter.
Posted on: 9/25/2008 3:08 PM by Author "skorp_jon" in the forum "Weatronic Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7990015

RE: Futaba 6014 heat failure (crash)
102 F is very low I have measured on my 608FS temperature of the receiver box 113 F. So that means that chip was mutch higher temperature. I had this receiver near the 80A regulator and near the battery. Small plane and no space. And i have no problem at 113 F. I will open the box tomorrow and move several digital servos and see how CPU temperature rise. I will measure temperature with IR thermomether.
Posted on: 9/10/2008 10:08 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7939708

RE: Futaba 6014 heat failure (crash)
I fly with futaba 14 receiver for 2 month without a problem.
Posted on: 9/9/2008 12:05 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7936531

RE: Futaba 6014 heat failure (crash)
Maybe it could help if we glue small heat sink to processor ? did someone try this. We use 6014 receivers in large planes. I don't think 10 grams will mather if we add heat sink. [image]http://www.v2conference.com/shower-cabinet/images/Aluminum%20Profile-s002/Heat_Sink_Profiles.jpg[/image]
Posted on: 9/9/2008 9:53 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7936155

RE: Futaba 6014 heat failure (crash)
You are right. I have also problem with graupner (JR) 5077 servos. When i turn on the transmitter servos go to the one side and then jump back. This is not big problem for me, because my servos don't go over limit. But may be problem in some planes when servo go over limit. Futaba really need to fix that. I will be happy to send back my receivers to be fixed for that. Futaba have great system, but they should improve it to be perfect system.
Posted on: 9/2/2008 2:55 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7912272

RE: Futaba 6014 heat failure (crash)
Are you sure it was heat problem ? Did you measuse heat of the receiver. I really don't know how could receiver get so hot in the plane when you are flying. In my pilon racer i have receiver near 80A regulator and battery and max. temperature that i have measured was 40C "104F" on the receiver. On my large planes i have a lot of space and my receiver is not even warm. I know they have heat problem and they should fix that. But here max. outside temperature when i fly is 30C so i think i will be ok. Until i crash :(
Posted on: 9/2/2008 7:46 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7911059

RE: Problem with H9 Showtime 4D 90
Thank you for help. I will play with mix next week. You are the first person to find the problem. I have checked and measured whole plane a few times and nothing was found.
Posted on: 8/22/2008 5:26 PM by Author "skorp_jon" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7874734

RE: Problem with H9 Showtime 4D 90
You are right. I have trimmed my fly at almost full speed. And i fly as high as i can. Then go straight down without throttle. My plane will rotate slowly at the way i have trimmed it. So that means that i have too powerfull engine ?
Posted on: 8/22/2008 3:44 PM by Author "skorp_jon" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7874462

RE: Problem with H9 Showtime 4D 90
I will fly tomorrow like you said. I have tested and both wings weight the same.
Posted on: 8/21/2008 4:34 PM by Author "skorp_jon" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7870896

RE: Problem with H9 Showtime 4D 90
Here are photos how is need to be to fly straight. I will go and check weight of the wings now.
Posted on: 8/21/2008 3:33 PM by Author "skorp_jon" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7870671

Problem with H9 Showtime 4D 90
I have showtime 4D 90 with OS 120AX motor. It fly great. But i have one problem. I always need to trim ailerons to the left. If i have straight then my plane will always spin to the right. "Make rolls" It will not spin very fast, but you can not fly like that. What should i check. Should i check angle of motor. Or anything else. I really don't know. I have checked a lot of things. And everything is straight or have the same angle on left and right side.
Posted on: 8/20/2008 4:27 PM by Author "skorp_jon" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7867061

RE: 12FG failed v1.6 firmware update
It happened exactly the same to me. My 12FG failed to update from 1.3 to 1.5 . I have send it to futaba service. And after 2 weeks i got it back. They flashed it for free.
Posted on: 7/16/2008 7:36 PM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=7738568

RE: 12FG and Z.....vs...14Z
Changes in 1.6 from 1.5 is small bug fix when u change module from example 35 Mhz to 40 Mhz here in europe. I think that in 1.5 there was an error message and you could not change that. Nothing big was changed, only this bug was fixed.
Posted on: 7/15/2008 7:59 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7734892

RE: 12FG and Z.....vs...14Z
12FG Support MPDX-1 Multi-Proportional System Decoder from version 1.5 now I own 12FG and is great. That comparision chart on futaba site is old. You have to check all updates and then you will know what all you have.
Posted on: 7/15/2008 4:58 AM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7732598

12FG: When change tail type i loose all mixes ...
Hy. I have a 12FG and when i change for example TAIL type from ailevator to normal tail i loose all settings for mixes and conditions on that model. Is there any way to avoid loosing mixes when i want to change tail type? I have configure my acrobat with all stuff. And now i want to copy that settings to new model. But that model use only 1 servo for elevator. And when i change tail type i loose settings. I really don't want to setup all over again.
Posted on: 7/12/2008 8:14 PM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=7723696

RE: How satisfied are YOU with your New Futaba 10C Tx??
You will always find some people that will mess with results. I have never seen 10C, but i have seen 9C and i own 12FG. And i am happy with futabas. I also have graupner/jr radio. But my futaba 12FG beat Jr radio.
Posted on: 6/27/2008 12:39 PM by Author "skorp_jon" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7667669

RE: Urgent Help required T12FGH+Calibration !!
If before update everything was ok then try to downgrade do 1.3 version and then back to 1.5
Posted on: 6/26/2008 4:52 PM by Author "skorp_jon" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=7664689