RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Charlie, will nitro replace this $457.95 100cc Su26 with the 50cc jap 'O'? I will box this up and send this plane back to you! what do you think? It don't look like I'm going to get any part's. and you will not retrun my missegeg's, what's this tilling your customer's? i just won't whats faire.
Posted on: 5/19/2013 6:53 AM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11515926

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
HayCharlie, you may need to drop me a E-Mails at both lines, One is mine and one is my wifes and I may not get to the computer FIRST! Mine you have (deadmeataircraft@gmail.com) and the other is (cakarrant@sbcglobal.net) You know women and there FACEBOOKING! LOL. Thanks. SAM
Posted on: 9/14/2012 10:22 AM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11228446

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Thank Charlie! Will start putting back extra money, I appreciate what your doing for me. I know its' not your fault and I not blaming you. Thank you agen. Will be waitting for(CONTACK)!! :~}
Posted on: 9/12/2012 5:10 PM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11226638

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
deadmeataircraft@gmail.com. Please hold me the part when it comes in, I do want the part! Thanks for your reply. Please leave me a phone number so I may contact you on my E-Mail.
Posted on: 9/12/2012 1:30 PM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11226432

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Next post
Posted on: 9/12/2012 1:23 PM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11226420

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Like I HEEP ASKING! WILL SOME ONE LET ME KNOW, WHEN THE PARTS ARE IN? IS THAT TO MUTCH TO ASK?[>:]
Posted on: 9/10/2012 2:17 PM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11224113

100CC NITRO SU 26 PARTS
I bought one of the "WHEN THEY WHERE NEW" SU-26 The red one, Took me just a few daye to put togather, I installed a BME102, with a 26X10 prop, All NEW JR 8611 MG servos and two 2700Mil batterys. Bal right on the rec, C/G, frist flite it flu like it was aft C/G. Power off, It wonted to clime and it was the same when you rolled it inverted. Went home and replaced the motor with a heaver motor, I installed an Air Hobbies 102. The next day we had an show at our field and all liked the plane and one guy ordered one on his I-phone and after the end of the day, He had put it togather yet?? I'm trying to get hem to sell it to me. No luck yet! The 2nd flite, I lifted off with about 50% power and broke away from the pitts at a 45 Dg clime. and the tail started to buffet and then I lost all Elev.control and it crashed. I kept it level till it hit the ground. After picking up the remaines I foundthat the servos where OK, That the aluminum rode that heled the rear stab togather bent, my grand douther could bend it. So i went home and got on line and found that had a fuse in STOCK! for $70.00, So l ordered it and about a week later it went on backorder and the price went up to $120.00, after a long sait and no help from customer service, I cancelled the order and with luck. I got my money back for the part that l ordered, but no luck on the plane that l payed $457.00 for. l have been watching and the plane keeps going in and out of stock and they keep improving the plane, BUT! They will not replace the plane or give me my money back. I'd like to rebuild the plane, All the parts are like NEW! I just need a fuselage and a cowl, If some one can help me out or like to make a deal on the parts, contack me at, deadmeataircraft@gmail.com Thanks and good luck, WE ALL NEED SOME LUCK THESE DAYS! [&o]
Posted on: 9/8/2012 10:38 AM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11221832

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Will ever be abel to get this part? OR Am I going to be stuck with $457.00 of junk? I see where they upgraded the plane. Why did they not take care of me at the time? At least replaced the plane or gave me a refund. I have been asking for help from the start! It only took me a few days to build the plane and like I said, when I ordered the fuse, It showed it in stock. Nitro took my money. Why would I spend the money to buy the parts? Help me out! I have guys in the club nitro has worked with.
Posted on: 9/7/2012 4:06 PM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11221127

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I need a fus, for a CMC 100cc su26, I ordered one and it said that it was in stock, So I ordered one and payed $70.00 and it wen't out of stock and the price wen't up to $120.00. I keep looking and the plane is always in and out of stock. I waited and gave up and cancelled my order. I got my money back. I got it when they first came out and used the customer help line a bunch of times. It cost me $457.00 at the time, they where $399.00 + shipping. The fuse, is all I need. Where can I pick one up? The rest of the parts is like new![:o]
Posted on: 9/6/2012 3:46 PM by Author "slamn sammy" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11219985

RE: NitroPlanes
Thanks KBOB. I don't know how they make it??? They have a 80in trainer I won't to buy for my wife and it has been out of stock and theres no place that will show me when or that thay will E-Mail me when it comes in and after that last go round I'm afraid to deal with it. The last go round cost me $457.00. The trainer is $99.99 I'll eat that for a chance. I'm also looking for a 80in PT19, Hobby King has one, AH, Had one, you GEST IT! OUT OF STOCK! But, Hobby King has been good to me in the past, At least they will E-Mail me when it comes in stock! I know they dun it! Mean while, If some one has or need some parts for a CMC SU- 26 100cc plane contack me at deadmeataircraft@gmail.com 'APPROPRIATE NAME HUH' [:D]
Posted on: 7/21/2012 5:05 PM by Author "slamn sammy" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11163871

RE: NitroPlanes
Good Luck with that! Ya, there out there, I have one of there 'at the time' new 100cc su 26's that I need a fuselage and I bought one from them and never got! I eventually got my money back. BUT, now I got a set of parts that I can not use, Inless I scratch build a fuse. SOME ONE NEED PARTS OR HAVE A FUSE THAT THEY LIKE TO GET READ OF? Like to rebuild it. The plane is in and out of stock all the time and nitro says that can or will not help me. GOOD LUCK with dealing with them.
Posted on: 6/26/2012 10:09 AM by Author "slamn sammy" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11132490

RE: Spectrum DX8 (Buyers Beware)
Try to find out witch DX8 run you have. when you remove the battery and look on the inside of the case there is a # that shows witch run you have and then go to the spektrum site and it show a list of numbers that is on the recall list. when you open up the battery box, the # is on the right hand side. My number is #HC 105 x and it's not in the recall list. Hope this helps. I have not had any problems with binding at all, Not even hobby kings stuff. Good luck :)
Posted on: 6/26/2012 9:44 AM by Author "slamn sammy" in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11132465

RE: orange rx performance
In what I saying earlier is DON'T go out and use a park flyer receiver on a Gaint Scale! 'BUT' On the 610 It says from "Park flyers to medum size aircraft" But I trust the 610 in all aircraft, but I would use the satellite receiver and also on the circuit board there is a provision for an extra antenna. Installing is a good ideal anf point at a 90% or even change the stock location to make them on a horizotai pos. Fly high and safe :-]
Posted on: 6/8/2012 8:07 AM by Author "slamn sammy" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11111219

RE: orange rx performance
King under 'Slamn Sammy' Look me up any time. My E- Mail is deadmeataircraft@gmail.com
Posted on: 6/7/2012 3:35 PM by Author "slamn sammy" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11110451

RE: orange rx performance
I have six of the Orange 610 receivers, One in a 50cc Extra mx2, With a R100 Sat, receiver and nown have about 25 flites on it with 'NO' brown outs at all. Not even a hick up and I see when some one runs them down, you ask them how meney thay have and what are going wrong with them? It's always "AH! WELL I DON'T HAVE ONE NOR HAVE I HADE ONE"! Well thats like when I was in the showing cat's and a kid would come and say "YA MAN! I GOT A 72 CAMARO AND IT HAS A 3/4 RACE CAM IN IT" And I would ask them, WHAT DURATION AND LEFT IS THAT CAM? The anser is always, "AH! WELL MY BROTHER OR DAD,SOME ONE BESIDES HEM BUILT THE MOTOR! If you know aboult building car motors, 3/4 race cam, Don't Exist! There are 3/4 race engines but cam's well, HERE COMES THE TRUNUP TRUCK, DEE,DEE,DEE. To make my point, I'm using a '610' in a Aeroworks 33% edge 540, Without a sat, Receiver with a BME 102 and it flys fine. The most commin Q&A Is "WHAT IS THE RANGE OF THIS RECEIVR?" The range is from the Radio and the state of the battery. NOW I'm saying go us a 'Park flyer' receiver In a Gaint Scale But what I'm doing is my own R&D. What I am saying, How dumd you are depands on who your talking to. Buy one and make up your own mind. If you read all the info, you'll see the AR- receivers sometime go wrong to. Speed control fail, servos fail, the crap tank somes run over to. Range ck, DO BE SAFE! Shop Box Broke I'm Gone
Posted on: 6/7/2012 11:13 AM by Author "slamn sammy" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11110206

RE: Air Hobbies Engines
Luck and stay out of the trees! LOL. 'Slamn Sammy' Contack me at '
Posted on: 6/6/2012 10:14 AM by Author "slamn sammy" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11108783

RE: Kyosho DC-3
. If some one like to make a trade, Contack me at [ deadmeataircraft@gmail.com ] THANKS SLAMN SAMMY
Posted on: 5/2/2012 1:56 PM by Author "slamn sammy" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11065778

RE: Kyosho DC3
HAVE ONE, FLU IT, KILLED IT. Lost an engine on take off. Looked stable, Until it lost an engine! It can be repaired, Don't know if it's worth it. Did a real good knife edge! O.S. L.A..40's, CG @ 25%. Rudder would hold it but not pull it out. 'RAN OUT OF REAL ASTATE'[&o]
Posted on: 4/30/2012 3:30 PM by Author "slamn sammy" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11063068

RE: Kyosho DC-3
Don't cear! Going to Kill it any way! i don't crash! BUT! I Do test GRAVITY! LOL. Ck'ed, anyway and found it had the same on the wing! 11/2 wash in on both wings. At least in will fly Inverted GOOD, MAC HODGES LOOK OUT! Frist ck, Ride today, We will see???????
Posted on: 4/26/2012 4:27 AM by Author "slamn sammy" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11057227

RE: Kyosho DC-3
I have a old Kyosho DC-3, I got on trade, It has been flown and the port wing was broken. Have read all discussions. Has any one flown one and did not kill it?? I have it ready to fly. Have fixed gear, O.S. L.A. .40 motors, 10X6 props, Thanking about changing to 11X4 Master Air Screw.That is what I us with my .40 3D models. Did not get cowls or nacelles. Built nacells, Going to fly and if it do't CRASH will build cowls. If some one has info please E-Mail me at, deadmeataircraft@gmail.com Going to fly the last week end of april. CK'ed wing tips and thay are both at 1,1/2 neg. Going to set CG at 25%. Like to get a manual, If some one has one. Thanks and help if you can. Sam
Posted on: 4/14/2012 7:43 PM by Author "slamn sammy" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11042165