RE: my 60 wont fly?????
there may be to much wieght at the front, make sure the battery is as far back as it goes.
Posted on: 6/18/2006 10:26 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4402957

RE: WALKERA 60
the servos all work perfectly, i even tryed replacing them with hs-55's and the problem still occurs. the servos either turn in the wrong direction or i have no control over them. (on the back of the tx, if i flik the switch to elev, instead of ccpm. i lose control of 1 of the servos, it still works and will center) what should the switchs on the back ment to be? thnx
Posted on: 6/18/2006 7:44 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4402649

RE: WALKERA 60
need some help. ma tx or rx has gone completely mad nothing seems to work properly, cant get motor to start or sometimes it starts for no reason whithout touchin anything, the servos r totaly f***ed, not moveing properly (very slow and wrong direction ) 1 of them does not react at all to the tx comands although it is connected to rx and works properly, what are the switchs at the back ment 2 be or what shall i do? SOS.
Posted on: 6/17/2006 3:20 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4400829

RE: change frequency
i would like more information on changing frequency as well please. i use the 7ch walkera radio system that came with my df60. but it uses 72mhz which aparently is illigal here in the uk.
Posted on: 6/11/2006 7:39 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4377353

RE: 430L keeps freezing. help
oh ok thanks ill try a smaller pinion and if that doesnt work im jus going to have 2 buy a new battery. thanks jeff
Posted on: 6/10/2006 8:18 AM by Author "sparkling_fist" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=4374385

430L keeps freezing. help
can any1 help me, im having trouble with my 430L + align 25a esc. the motor works really well,. excellent power and i love its ventelation, but the motor cuts off when i increase the throttle to much, i think i have taken the brakes off. when its in the heli, and fully charged i can just about get max but not full so the 3d is pointless. but when i take it out so it runs freely, it easily powers up to full.. and stays there until battery is almost completely dead. im guessing that the heli takes more out from the motor so it cuts off but i dont want this.. how can i stop it from doing this? the esc or motor doesnt get unusually hot at all. someone help
Posted on: 6/9/2006 4:06 PM by Author "sparkling_fist" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=4372228

RE: WALKERA 60
soneebee, new tail boom and blades looking gd can any1 help me, im having trouble with my 430L + align 25a esc. the motor works really well,. excellent power and i love its ventelation, but the motor cuts off when i increase the throttle to much, i think i have taken the brakes off. when its in the heli, and fully charged i can just about get max but not full so the 3d is pointless. but when i take it out so it runs freely, it easily powers up to full.. and stays there until battery is almost completely dead. im guessing that the heli takes more out from the motor so it cuts off but i dont want this.. how can i stop it from doing this? the esc or motor doesnt get unusually hot at all. someone help
Posted on: 6/9/2006 4:04 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4372221

430l keep cutting off
hey i recent got the align 430L + align 25a esc and after a long while soldering the damn thing together, i finaly got it working it is really powerful and i love how the air rushes in and out when it runs. however the motor keeps cutting off once i raise the throttle stick. this doesnt happen when the battery is full charged but as it weakens, the throttle cuts off at certain points. and the points go lower as battery dies. what do i do to make it so this doesnt happen? thanks
Posted on: 6/9/2006 1:31 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4371760

RE: WALKERA 60
[quote]soneebee Date 6/7/2006 2:51:29 AM sparkling_fist nice heli.. very new.. remembered the time when i got my DF60.. its was a sparkling as that.. check the tail rotor and shaft for binding.. i found my DF60 had that problem before.. the stock servos for the rudder works fine its kinda slow... i love how new and sparkling it is, ill get a video once i manage to get more flying time out
Posted on: 6/7/2006 12:00 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4363633

RE: WALKERA 60
://i21.photobucket.com/albums/b261/Sparkling_Fist/Photo-0093.jpg[/image] [image]http://i21.photobucket.com/albums/b261/Sparkling_Fist/Photo-0090.jpg[/image] [image]http://i21.photobucket.com/albums/b261/Sparkling_Fist/Photo-0092.jpg[/image] [image]http://i21.photobucket.com/albums/b261/Sparkling_Fist/Photo-0091.jpg[/image] [image]http://i21.photobucket.com/albums/b261/Sparkling_Fist/Photo-0094.jpg[/image]
Posted on: 6/6/2006 4:02 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4360294

430L Compatibility with Walkera
will the align 430l brushless motor work with my walkera 30a esc? or do i need to buy a seperate esc as well? if you know then please say thanks
Posted on: 6/4/2006 11:06 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4351457

RE: WALKERA 60
soneebee, it is true that because the distance is further, there will be bigger movement but it also means that it will require more work, if the flybar was lower it would move more easily but slower. im not sure if its better to have the flybar above the main blades but thats jus the science of it, and since the heli can provide alot of power, im guessing its better to have the flybar higher,
Posted on: 6/3/2006 2:10 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4348715

RE: Who says electrics don't get messy? Damn bugs..
why would bugs want to fly very close to a huge dangerous and incredibly loud helicopter? its just stupid. but it happens
Posted on: 6/3/2006 8:05 AM by Author "sparkling_fist" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=4347822

Quick question on 430L
will de align 430l brushless work with my walkera 30a esc? thank u
Posted on: 6/3/2006 7:55 AM by Author "sparkling_fist" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=4347809

RE: WALKERA 60
i cant.. i lost those. but anyway i decided to get an align 430l but need help because i dont know what pitch pinion i need http://www.rcuniverse.com/forum/m_4335629/tm.htm <-- link to my other post about it
Posted on: 5/31/2006 9:39 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4335702

help. need information about pinions
hello. well im going to buy an align 430 with castle creations phx 25 for my dragonfly 60. but the motor does not come with a pinion i want to buy a pinion seperatly but am confused with the whole pitch thing. i had bought a 48pitch steel pinion before for my dragonfly 36 (i had the walkera 180 brushless) but the teeth were differnt(2 small) and they totally destroyed the main gear.. im certain the gearing for the dragonfly 36 and 60 are the same so i dont know weither the 48 pitch was wrong or that steel pinions have differnt teething. usualy the pinions for the walkera brushless are made out of brass. so basicaly i want to know what kind of pitch/pinion will i need to work with my dragonfly 60? thank you
Posted on: 5/31/2006 9:09 AM by Author "sparkling_fist" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=4335629

RE: WALKERA 60
its the walkera 180 3200kv i should have mentioned
Posted on: 5/31/2006 5:57 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4335238

RE: WALKERA 60
slight problem. i just realized that i lost the screws for the brushless motor. will there be any screws that come with the heli (or i can take out from my 36) that i can use or do i have to go out searching for some? also i would like to know which other brushless motors can work with the walkera 25a esc.
Posted on: 5/31/2006 5:18 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4335195

RE: Death Wobble
jus a suggestion if u dnt already do it.. make sure the main blades r slightly lose so they straighten out as the rotor head spead picks up
Posted on: 5/30/2006 9:47 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4331337

RE: Walkera Dragonfly #36
kreto. i really doubt this heli can fly with a motor like that... the main rotor head speed will not b enough to life the heli off the ground, unless you have a many teeth pinion. and the motor is powerful enough for the smaller gear ratio
Posted on: 5/30/2006 7:28 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4331050

RE: WALKERA 60
i have hs 55.... will those work?
Posted on: 5/26/2006 12:45 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4318879

RE: WALKERA 60
Hey people. i have finaly orderd this helicopter. it should arrive in two weeks or so. what im going to do is remove the stock motor and replace it with the 180 brushless i had from before. before i attempt to fly the helicopter.. what else would you advise i do? althought its asking 2 much since its a walkera heli. i do not want any problems with this thanks in advance
Posted on: 5/26/2006 3:57 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4317878

RE: WALKERA 60
it has a heat sink on it but if it still is going 2 be a problem then let me know because i cant buy any other parts.. i was thinking of getting the align 420lf as well but i can only get the helicopter... i dont want the problems i got with my 36 which wouldnt hover for more then 5 secs.. so unless i can get at least a decent 2 minute hover i dnt want 2 waste the money.. thanks
Posted on: 5/21/2006 12:17 PM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4301177

RE: WALKERA 60
i have the walkera 180 brushless (3200kv with 10t pinion) with 25a esc.. will this b powerful enuf to fly the helicopter because i dont want to end up buying new motors esc etc.... thnks
Posted on: 5/21/2006 7:00 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4300525

RE: WALKERA 60
hey.. im planning 2 get this helicopter and i know that the brushed motor wont be any good. so will i b able to use the brushless unit from my dragonfly 36. i also have hs 55 servos... will these work with the new radio system? thnks
Posted on: 5/20/2006 9:17 AM by Author "sparkling_fist" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4297866

RE: Plantraco Butterfly
yup. why shouldnt it be.
Posted on: 1/8/2006 2:19 PM by Author "sparkling_fist" in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=3747749

RE: Broken AA
well. best thing u can do is replace the motor, if that doesnt then ur gonna have to change the rx. or it might just be easier to replace it all.
Posted on: 1/8/2006 2:11 PM by Author "sparkling_fist" in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=3747726

MOVED: dragonfly 36/35 blades the same?
Walkera Helis - Dragonfly, etc..: http://www.rcuniverse.com/forum/fb.asp?m=3223455
Posted on: 12/21/2005 10:25 AM by Author "sparkling_fist" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3677855

RE: brushless motor switch
thats what i want to do as well..
Posted on: 11/5/2005 10:09 AM by Author "sparkling_fist" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=3523616

RE: New River Video
says invalid.
Posted on: 11/5/2005 10:08 AM by Author "sparkling_fist" in the forum "Aerial Photography and Video"
http://www.rcuniverse.com/forum/fb.asp?m=3523612