RE: WHATS UR BED TIME?
i know of a special substance that can make you stay up for 3 days straight , and you dont feel hungry for the 3 days either so you must remind yourself to keep drinking water LOL .
Posted on: 11/18/2009 1:29 AM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9262036

RE: WHATS UR BED TIME?
On week days for work i try to get to bed by 9:30pm 10:30 maximum any later than that and im buggered like a zombie the next day . weekends i stay up to 1 am smoking cuban cigars outside , then i can stay upto 2.30 am to work on my 5b if i have to , then the next day im drinking loads of energy drinks and paracetemol to stay awake LOL
Posted on: 11/17/2009 1:30 AM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9259489

RE: Help! 1st gas car, FG Baja Buggy Competition 4WD, need directions
the engines in these gassers are pretty much the same as you will get in a home brand weed wacker for your lawn mowing , except that the engines the rc gasser engines make more power . once the engine has been run in and tuned for performance there is nothing else you need to do to it , so dont touch the carb settings at all after thats been done forever. i found they have more power in the cold but it does need to have a bit of warmth , like dont rev the crap out of it the second it starts , maybe wait 1minute and a half before you do that . hot or cold weather the carb settings must not be touched or it will run like crap, with these gasser engines even the slightest adjustment on the carb needles make a major imapct on how it performs , when tuning the carb you need to find the performance sweet spot then dont mess around with it . the only time you need to re adjust the carb settings is when you have installed a new piston or ring then keep tuning it untill its run in then thats it
Posted on: 11/15/2009 2:46 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9254652

RE: Help! 1st gas car, FG Baja Buggy Competition 4WD, need directions
i replaced my piston in my 5b and ran it full blast for over 5 minutes , but with a rich fuel mix , i have no problems
Posted on: 11/15/2009 12:34 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9254536

RE: Anything....juicy coming out soon?
[quote]ORIGINAL: sheograth I'd love to see another 1/5 from HPI... something new and different. They've proven their engineering prowess with the 5B platform, so I have no doubts that they're capable. That French buggy does look nice as well. [/quote] yeah same here , i been waiting for a long time , just hope it happens for this christmas , im getting bored and need something to waste my money on
Posted on: 11/15/2009 12:28 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9254530

RE: 60cc Motor in Baja Bug Video
[quote]ORIGINAL: ryan@ddm Sorry, way too much work for minimal benefit - the SKOPOD kit from TGN is what you need. [/quote] ok , do you sell the piston and rings for this , and the cranks ?
Posted on: 11/13/2009 4:26 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9251503

RE: 91 inch dragster
would this thing be able to chuck a burnout and smokem up , thats the question
Posted on: 11/13/2009 12:55 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9251101

RE: 60cc Motor in Baja Bug Video
[quote]ORIGINAL: ryan@ddm [quote]ORIGINAL: sam123 but the cylinders are getting harder to come by. [/quote] ? G62 cylinders can be found at many, many locations on the web, including major players like Horizon Hobby. [/quote] can you please make a special section for this motor with all the combined pieces to make a working assembled engine to go into a 5B, on your web site please .
Posted on: 11/13/2009 12:48 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9251086

RE: RETURN OF THE BEAST
[quote]ORIGINAL: Nutech GmbH Bling bling! how much for the upgrades? [/quote] only a couple thousand , still might add more
Posted on: 11/13/2009 6:45 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9250408

RE: RETURN OF THE BEAST
i have just taken it out for a test run , and it goes pretty good for about 5 minutes then idles and shakes bad and engine dies , i look at the plug and its wet really bad and fouled , i think i may have set the coil gap to the flywheel TOO close and i know it , its fouling plugs too many times , even when i adjust the carb , carb is brand new so its not that , piston is new also , i think it really is the coil gap cos its not firing properly after 5 minutes of running. what can i use to set the coil gap , i dont have the coil gap tool
Posted on: 11/13/2009 6:13 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9250386

RE: RETURN OF THE BEAST
So a List of mods IRP front turnbuckles RC4WD billet light pods Ramtech plug and play for front light pods FLM alloy complete arms stock length hpi 6mm shock shafts ,with hard springs GH Piggy backs GH alloy gearbox Turtleracing rear shock mount turtle racing rear tranny plate PM spur gear cover with reaper cover Darksoul racing alloy beadlocks daksouls roof scoop TGN spark plug cover TGN exhaust pipe raw then i had it chromed by local plater chrome engine fan covers custom made front bumper with custom made front 5 led light pods rack,made by me custom made rear spoiler,made by me polished chassis alloy tgn filter lid Micro hobby inner stainless steel beadlocks WARNING these are heavy, but extremly strong and shiny lol hostile rear slicks DDM wheel nuts blue DDM iron cross alloy fuel cap vertigo front back alloy extenders with alloy mounting hubs abec 5 bearings hpi heavy duty rear axles stainless steel braided fuel line alloy wing pins DDM 4500 main batt vertigo billet clutch carrier, vertigo clutchbell standard clutch with red 8000rpm spring vertigo billet layshaft carrier hpi alloy brake mount Hostiles 19/55 spur gear combo alloy diff ENGINE SPECS Trevor Simpson induction crankcase motor 2 bolt ESP mod and champonship raceported 36mm 30.5cc stuffed 2mm stroker lightened flywheel brass zero drag seals new walbro 813 carb estimated power with pipe 7.5hp plus who knows , thing is scary to drive, deafening to listen . RADIO GEAR SPEKTRUM DX3R . killer bee fail safe Hope i remembered all the upgrades
Posted on: 11/13/2009 4:07 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9250339

DELETE
sorry delete
Posted on: 11/13/2009 3:27 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9250295

RE: WARNING!! - Watch out doing business with Oversize RC in Melbourne, Australia!!
it wouldnt be the first time oversizerc pulled stunts like this on their customers , it sounds like they recieved your order but were too lazy to prepare the order and send it out , but in the end everyone that complained about not getting their orders all ended up recieved them , but recieved them VERY LATE , this is the main reason i dont buy buy cheap chinese rc imports cos then this is the sort of headaches you will get from crap hobby shops such as this , stick with genuine original rc's and genuine hobby shops to avoid this LOL
Posted on: 11/4/2009 1:14 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9226896

RE: WARNING!! - Watch out doing business with Oversize RC in Melbourne, Australia!!
how much did you pay for the stuff you ordered , have you tried calling them
Posted on: 11/3/2009 1:46 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9224292

RE: Happy Halloween !
well here its monday and its day of the dead here in australia , its always next to halloween , so i think it is linked , its just celebrated tottaly different , you coud say the same thing for easter what the hell does rabbits and eggs have to do with easter and jesus dying on the cross , lol rabbits dont lay eggs
Posted on: 11/1/2009 5:59 PM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9220813

RE: THIS MEANS WAR..
yeah 150mills is 25 to 1 , i have gone to 200mills in the past and it never ran good i also run a substance called liqui molli 2stroke antifriction treatment to it i add 4mills of it to the mix its powerfull stuff i once went over the recomended and it stained the entire 5 litres of fuel and didnt run properly lol its recomended 10mills to 10litres of fuel , it helps the piston reduce friction in the cylinder bore and i noticed more revs when using it [quote]ORIGINAL: dc2 man yeah i often contemplated using 150 mill as i think im a little on the rich side now. i might try one gallon of 150 mill just to see..... why not,cant do any harm,150mill is allowed on it anyway actually it was what was reccomended to use on it,but i like to run a little rich. i must start now on needles first and see with the 200mill. [/quote]
Posted on: 11/1/2009 8:47 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9219656

RE: Happy Halloween !
[quote]ORIGINAL: Gex_61 [quote]ORIGINAL: splcrazy what kind of stupid retard tradition is halloween ment to be about anyways LOL [/quote] http://en.wikipedia.org/wiki/Halloween [/quote] lol okay here in australia we just call it the day of the dead , and go visit our past relatives at the cemetery thats all , its not a public holiday , its not a big thing and mainly only the old people
Posted on: 11/1/2009 8:38 AM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9219647

RE: Happy Halloween !
what kind of stupid retard tradition is halloween ment to be about anyways LOL
Posted on: 11/1/2009 7:18 AM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9219553

RE: THIS MEANS WAR..
Lol 200 mills to 5litres is like way too much for me man, use at least 150 mills thats whats i was ment to say, And use synthetic , i used the crap klotz oil that had castor in it and it caused hard black baked on crusts on the top of my piston which ended up causing my motor to shut down and not fire up and was running like crap, castor oil is good for nitro engines cos it needs that extra lube , but castor works crap in these gasolene engines man it even smokes it up even more from the exhaust, makes the mix too gummy and thicker aswell [quote]ORIGINAL: dc2 man ill tell you man im using 200mill of oil to 5liters oil measured in a jug... its good oil,syntetic.....but which is better syntetic or castor?? man ill tell you this engine is a dose trying to tune right,its easier on tarmac as you notice the tune cause the tyres grip straight away,on field they spin a lot..... man i must spend a bit of time today with it tuning it,its tricky. the cad engine uses almost a turn closed on each needle compared to stock engines lol seriously you seem to have a great tune on yours [/quote]
Posted on: 11/1/2009 7:07 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9219542

RE: THIS MEANS WAR..
[quote]ORIGINAL: dc2 man ill tell you this is my first time using the 16tooth clutch pinion and its much better,now today i must retune again as yesterdays video wasnt tuned at all,i think im still too rich high end...seriously it effects low end aswell as you know if high is too rich. man the place was saturated wet here. the 16 clutch is a lot better if i get a new vid today i will throw it in my own thread [/quote] hey you know what you need to do man , is to tune your carb for high performance and speed , then increase your fuel oil mix , its what i do to mine and its never failed me . you know the 2stroke oil bottle that comes with the 5B i use that for oil measuring , i add almost one bottle and then another half to 5litres of 98 octane , and now im using a 2stroke oil called silkolene comp 2 premix and its really freaking awsome man and its loving it , jeez the higher in quality of 2stoke you go the more power is unleashed
Posted on: 11/1/2009 6:42 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9219506

RE: flooding 813
[quote]ORIGINAL: mooman007uk I chucked in a new shaft too...same flood city....I'm convinced now the pump piston and bore are worn...if i could find a new oring i think it would fix it but i can't find a tiny one anywhere...I'll try walbro direct as i'd like to get a new piston and oring just to see if my diagnosis is correct...if i can't source one then maybe when i get a new carb i'll pull the parts from it just so i know...I hate not knowing why [/quote] hmm okay i think my problem was something else maybe a bad fuel mix i was experimenting with, thats strange for your 813 to die , what kind of conditions did you run it in ? and how long for
Posted on: 10/31/2009 11:16 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9218934

RE: What if you got fooled?
yeah but isnt that car built in korea ? LOL looks like a piece of cheese on wheels , ugly car ever
Posted on: 10/31/2009 11:13 PM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9218927

RE: A VERY FUNNY MOVIE....
[quote]ORIGINAL: evader8 [quote]ORIGINAL: splcrazy i love will ferrells other movie LAND OF THE LOST already watched it three times , i havnt seen step brothers yet [/quote] lnd of the lost got worst movie of the year. and it never looked good ne way. [/quote] what ? how come , i think it was pretty good , very funny and it looked really good
Posted on: 10/31/2009 11:11 PM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9218923

RE: flooding 813
i have experienced this to my 813 aswell , when it did it i thought it was the piston ring , but now maybe it could be the 813 , i was running the 5b and all of a sudden it would bog and smoking really bad from the exhaust then shut off . could it maybe be that it needs a new modified throttle shaft ?
Posted on: 10/31/2009 5:08 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9218151

RE: THIS MEANS WAR..
lol dc2man my friend , your going to get in trouble again for opening up another vid thread LOL good vid by the way, if i were you just put it in the other thread you made called flick of the switch and then update the title saying new vid added
Posted on: 10/31/2009 5:00 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9218135

RE: A VERY FUNNY MOVIE....
i love will ferrells other movie LAND OF THE LOST already watched it three times , i havnt seen step brothers yet
Posted on: 10/31/2009 4:53 PM by Author "splcrazy" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=9218122

RE: Anything....juicy coming out soon?
[quote]ORIGINAL: Foxy I know a little something. Sheo I'll send you a pm. ;) [/quote] come on man you cant say that , now i want to know aswell [:D][:D]
Posted on: 10/31/2009 5:27 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9217034

RE: DC2/GT5/C5/FG/EVO/ELCON/CAD/BEETLE
[quote]ORIGINAL: Nutech Racing Buy a new thread lock.[:D] [/quote] fast eddy's red thread lock
Posted on: 10/30/2009 6:50 PM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9216021

RE: DC2/GT5/C5/FG/EVO/ELCON/CAD/BEETLE
hey whats all the boxes in the background , are you a tiler ? also there is some horrible looking FG beetle in the middle of the pic for some reason LOL HA HA HA JUST KIDDING MAN . hey if i were you i would remove all the helical gears set up and put back the stock gears back in , but you need to change the clutch pinion to a 14t because you are running the elcon drive assembly, after thats done take it out for another run and see if the stock gears last without getting destroyed , if the stock gears get destroyed then i would start thinking that maybe the elcon drive assembly got warped
Posted on: 10/30/2009 12:42 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9214217

RE: WOW this is what im talking bout , twin drag pipe 5B
[quote]ORIGINAL: hndaman1 OMG that look horrible, and the weight must be nuts, there has to be a better way?JMO [/quote] whats wrong with you man use your imagination , these look fantastic , ahh damn it already sold out
Posted on: 10/30/2009 12:31 AM by Author "splcrazy" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=9214197