RE: broke controller antenna
I just tried to screw it off and it came out. I didnt know that. I will either get new anteanna or the the hanger mod.
Posted on: 5/7/2007 2:39 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5823059

RE: Is the atomic bb motor upgrade worth it (micro-t)
[quote]ORIGINAL: Maggster I know it isn't a stock motor. When it was first being talked about, the claim was that it was essentially the same as a stock motor, but with bearings instead of bushings. Then someone took one apart, and it had bushings. So it is essentially a stock motor with a BB sticker. Maybe I did just get a bad one, but there is no way it is "way faster then stock". I don't have a way to actually measure it, but it definitely seems a little slower than stock. Just my $.02 YMMV [/quote] There is alot of people here with Atomic BB motor on their Micro-T and i have never seen a single person complaining about the motor being slower than the stock, so i dont know what r u talking about. Do you think people pay extra money to go slower?
Posted on: 5/7/2007 12:32 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5820830

RE: broke controller antenna
[quote]ORIGINAL: AllAboutFunHobbies Get a piece of coat hanger and strip off the coating at one end about an inch, clean it and solder it inside the between the two borken pieces. [/quote] Sounds good. I will try it but will it work when try to push the antenna back?
Posted on: 5/6/2007 11:53 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5820664

RE: broke controller antenna
[quote]ORIGINAL: mod_55_fan does it screw out of the controller do u have a spare one just screw it out and switch the antennas around thats what im gonna do with mine when it breaks [/quote] I never tried it but i dont think it will screw out.
Posted on: 5/6/2007 11:49 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5820653

broke controller antenna
It was bent, I tried to straighten it out , you know redcat quality, it broke. I didnt try it if it still controlls the truck. It prolly would but not less distance. Anyways should get a new one? What are my choices. Definatly dont want to spend too much money on this truck anymore.
Posted on: 5/6/2007 9:58 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5820075

RE: anyone have one of these?????
[quote]ORIGINAL: ehroof the rpm pipe if for high end, the ribbed pipe is for more low end. they are both good pipes, just for different things. [/quote] So the ribbed one will fit to tsunami with HPI header?
Posted on: 5/6/2007 3:36 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5818594

RE: micro-t problem
[quote]ORIGINAL: nitro _ burner uhh question, have you even tried taking the gear cover off and having a look at the gears??? if not it would be best if you did. [/quote] Yeah i did that. It looks like there is very little gap between them but i dont know if it will cause it. Also i dont know how to reduce the gap between gears. Pushing them together dont work
Posted on: 5/6/2007 2:47 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5818444

RE: Is the atomic bb motor upgrade worth it (micro-t)
Extra money for sticker????? This is the best mod i have for this truck. It is a hell of a upgrade for the money. You cant play indoors anymore.
Posted on: 5/6/2007 2:43 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5818429

RE: anyone have one of these?????
so the one looks like dildo LOL is better than this one? http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXBMH0
Posted on: 5/6/2007 1:02 AM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5816590

RE: Is the atomic bb motor upgrade worth it (micro-t)
It says here it has brass bearings not ball bearings: http://www.thetoyz.com/cart/thetoyz_details.lasso?id=8619&cat_name=MICRO%20T Also i really dont care about bearings, yeah if it has ball bearings it is better but i dont think it will be same price. It is only $13.xx shipped. Cant beat it.
Posted on: 5/6/2007 12:51 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5816560

RE: micro-t problem
I have the Atomic. It has been 3 weeks since i installed it. I didnt have problems up until now. It feels like pinion turns freely not touching the gear but not sure.
Posted on: 5/6/2007 12:44 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5816541

RE: micro-t problem
it was working fine before. It started doing this last couple runs
Posted on: 5/6/2007 12:17 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5816456

micro-t problem
Sometimes my motor spins but truck stands stills. Anyone had anything like this? What can cause this?
Posted on: 5/5/2007 11:29 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5816288

RE: Is the atomic bb motor upgrade worth it (micro-t)
stock electronics are just fine. It is the best upgrade i have made for this truck. Well worth $15
Posted on: 5/5/2007 11:26 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5816273

RE: no control
^^^ those batteries go in to the controller?
Posted on: 5/3/2007 9:31 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5808244

RE: GOT A MICRO T FROM EBAY
very nice deal.
Posted on: 5/3/2007 12:31 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5804423

RE: Considering a Tsunami
I would recommend you to upgrade rear hubs and front axle holders to aluminum. If you are going to do alot of jumping aluminum shocks are must.
Posted on: 5/2/2007 11:20 AM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5801099

RE: my nitro car vid WHATCH IT
god damn i have never seen video like this dude. KICK ASS!!!!!!!
Posted on: 4/29/2007 9:57 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5789252

RE: OFFICIAL Team Losi Micro-T thread !!!!!!!!!!!!!!!!!!!!!!!!!!!!
[quote]ORIGINAL: poomaster whats it mean if i only have 5 posts, reliable source told me, so your opinion will be disregarded, but hey i am just trying to be helpful and pass on what i heard, didnt really as for your thoughts but i guess since you have been on here so long that your probably right, i mean heck what would a guy sponsored by losi, novak, lunsford, airtronics, and a couple others know, you must be the best pro poster in the universe. [/quote] very well said [sm=thumbs_up.gif]
Posted on: 4/29/2007 2:02 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5785707

RE: Fail Safes: whos using em?
sorry for the dumb question but what does fail/safe do?
Posted on: 4/29/2007 12:11 AM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5785289

RE: questions about team losi micro-T
It is a fun little truck. You cant go wrong with it. Also make sure u get Atomic BB motor upgrade. Also set of new tires because they cant hold that long for the new motor [:D]
Posted on: 4/28/2007 11:56 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5785207

RE: MICRO T BATTERIE
I bought mine off of ebay (stupid me) instead of killerhobbies it has been more than 10 days I still dont have it. Emailed them they said it is not our problem. Their ebay name is [b]toolbay[/b]. They are rude as hell, one sentence email responses DO NOT get anything from this seller
Posted on: 4/28/2007 11:45 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5785149

RE: WhAt THe F*@k Is WrOnG wItH mY mIcRo T ??
mine is louder in reverse than driving forward, what would be the cause? or is it normal?
Posted on: 4/23/2007 7:27 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5759396

RE: Day at Clermont Motorsports track
it is a nice video but most of the jumps are right before sharp turns. You could easily go out of bounds.
Posted on: 4/23/2007 12:28 AM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5755841

RE: problem
Ok i finally replaced my clutch shoes and springs. What they looked like when i took them off. [IMG]http://i31.photobucket.com/albums/c385/ttemizel/truggy/cluctch01.jpg[/IMG] Hpi racing clutch's spring was pain in the butt to keep two sides connected. I also tried to install 13/18 clutch bell but no luck. Couldnt figure it out.
Posted on: 4/21/2007 7:27 PM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5749995

RE: Batts for Micro-t charger
I dont have suggestion on charger but i was gonna buy wall adapter to charge it. I charged it maybe 25 times before batteries dead so i changed my mind about buying adapter or rechargeable battery. If you dont play with it like crazy stay with regular batteries.
Posted on: 4/20/2007 1:27 AM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5743206

RE: medusa brushless 12mm for micro-t
[quote]ORIGINAL: maxxdout lol, and uncontollable!!! if i get some extra $$$ im definetly gonna get the cheaper motor and esc, but righ now i am gonna try out the atomic bb motor and losi lithium polymer pack combo...... [/quote] I dont see any resason spend that much monet on Micro-T. If you these on Mini-T i will accept that but on micro-t waste of money. Anyways BB motor is great motor, huge improvement over the stock one. Definatly worth the money. I have played with it maybe 15 times with stock motor didnt break a single part. With Atomic BB after second charge i broke the rear hub and i dont even have lipo. 160 mah is in the mail tho.
Posted on: 4/19/2007 9:44 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5742138

RE: atomic bb motor review
I dont know exactly what does ball bearing in a motor do but for $14 u cant beat this motor. It is really fast. Since i only use it indoors it is more than enough.
Posted on: 4/18/2007 7:32 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5736560

RE: atomic bb motor review
I would love to but i broke my rear hub and i dont even play with it outside. Jumps got crazier with this motor. I hit to the tv stand side ways and boom, broken rear hub. 160 mah on the way so it will be lil more faster, i think well enough for indoor.
Posted on: 4/18/2007 7:26 PM by Author "sti-06" in the forum "1/16th, 1/18th, Mini & Micro RC Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5736523

RE: TIRE COMPATABILITY PLEASE READ THIS EVERYONE LOOKING FOR TIRES!!!!
good info, thx
Posted on: 4/17/2007 10:25 AM by Author "sti-06" in the forum "Redcat Racing Support"
http://www.rcuniverse.com/forum/fb.asp?m=5728932