|
RE: full tube chassi for my 5t
thanks mate, got all the shoxs i need so polishing them up and rebuilding, got the mcd parts ready to fit,
Posted on: 7/7/2012 2:15 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11146189
RE: full tube chassi for my 5t
[IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01984.jpg[/IMG] i know the chassis prob weighs abit, but i think it will take a beating
Posted on: 7/7/2012 1:42 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11146180
RE: full tube chassi for my 5t
hi went abit over the top with this one, its now 4wd with mcd drive system and hpi baja suspension, 2 shocks per corner, [IMG]http://i556.photobucket.com/albums/ss9/dunroost/bumper%20and%20light%20bars/DSC02406.jpg[/IMG]
Posted on: 7/7/2012 1:40 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11146178
RE: rc stand up jet ski
hi mate, blimey, my missis is well into the titanic, been watching all the programs on it recently, such a traggic story
Posted on: 4/27/2012 1:14 PM by Author "stiggwelder"
in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11059305
RE: rc stand up jet ski
hi cheers, got it as a model show in the south west england, cost me £5.00, i have a jet unit for it already, should be fun
Posted on: 4/27/2012 12:21 AM by Author "stiggwelder"
in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11058660
rc stand up jet ski
hi anyone got one of these [IMG]http://i556.photobucket.com/albums/ss9/dunroost/rc%20on%20water/DSC02331.jpg[/IMG]
Posted on: 4/26/2012 3:29 PM by Author "stiggwelder"
in the forum "RC Boats General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=11058108
RE: 5t bumper
hi cheers, yea tried it higher but it looked to big then, the lights are oversized if it was a scale look you where after
Posted on: 12/20/2011 12:48 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10868482
RE: 5t bumper
[IMG]http://i556.photobucket.com/albums/ss9/dunroost/bat%20baja%20cave/DSC01995.jpg[/IMG]
Posted on: 12/19/2011 4:20 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10867148
5t bumper
built a 5t bumper for a guy, what do you think guys [IMG]http://i556.photobucket.com/albums/ss9/dunroost/bat%20baja%20cave/DSC01999.jpg[/IMG]
Posted on: 12/19/2011 4:19 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10867146
RE: 5t tube chassis 4wd
hi mate, the section at the back of the roll bar going down to the rear shock mounts with the x in it is removable and aswell as the o/s side bars to get to the gears, thanks
Posted on: 12/19/2011 4:10 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10867130
RE: 5t tube chassis 4wd
hi finally got it back from the p/coaters, its not the orange i asked for, why do they do that, [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01979.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01983.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01982-Copy.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01984.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01981.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01980.jpg[/IMG] its was gonna be the same colour as my orange sandrail
Posted on: 12/16/2011 10:49 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10862483
RE: 5t tube chassis 4wd
hi cheers mate, getting on, got the star trek pipe welded [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01943.jpg[/IMG] getting the last tubes in [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01944.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01946.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01945.jpg[/IMG]
Posted on: 11/26/2011 12:16 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10829977
RE: 5t tube chassis 4wd
hi changed the front tubing around the steering to clear servo linkage [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01938.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01939.jpg[/IMG] started on the pipe [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01936.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01940.jpg[/IMG] sorted the last tubes under the hood [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01933.jpg[/IMG]
Posted on: 11/21/2011 2:27 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10822727
RE: 5t tube chassis 4wd
hi cheers got the second front shock mount ready to fit [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01925.jpg[/IMG] took ages to sort out got the servo tray done [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01928.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01929.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01932.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01930.jpg[/IMG] more trimming of the shell
Posted on: 11/20/2011 2:00 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10821190
RE: 5t tube chassis 4wd
hi , got the steering redone without bump steer now, sorted the twin shock mount on the susp arm and got the top mounts sorted and nearly mounted, getting abit cluttered now so need to nail it and move onto the next one [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/011.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/012.jpg[/IMG]
Posted on: 11/19/2011 2:12 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10819770
RE: 5t tube chassis 4wd
the green one [IMG]http://i556.photobucket.com/albums/ss9/dunroost/sandrail%20p2s%20mk2/DSC01112.jpg[/IMG]
Posted on: 11/18/2011 12:05 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10818332
RE: 5t tube chassis 4wd
hi cheers guys, the rod ends came off ebay, i dont know who makes them, they are brand new but have megga play in the socket s will need some modding, the chassis here is a conversion from a tube chassis i did for the 5t 2wd to a 4wd mcd runniong gear, so alot of the tubes are a combination of the 2 , this will be used as a test bed and another will be built , my green sandrail which uses std hpi stuff and weighs the same as a std baja gets some abuse and holds up well, so if i can get get the end chassis some where near it, it should be ok, i think also that if you can get the weight of a buggy right so as to make the suspension work rather than have somthing so light that when it hits a bump it just jumps off the ground and looses steering and drive momentum
Posted on: 11/18/2011 12:02 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10818321
RE: 5t tube chassis 4wd
hi thanks, hope to get some time on it today to nail the tube work
Posted on: 11/12/2011 12:15 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10808134
5t tube chassis 4wd
been busy building, tube chassis , hpi baja susp, mcd running gear [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01911.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01914.jpg[/IMG] now ive got the front frame sorted i can put the front top shock mounts in [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01915.jpg[/IMG]started sorting the front drive and susp layout [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01916.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01918.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/hpi%205t%20dual/DSC01922.jpg[/IMG]
Posted on: 11/11/2011 1:13 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10807483
RE: sandrags 860 wheelbase
hi thanks, cant wait to give it a blast
Posted on: 10/26/2011 1:29 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10783826
sandrags 860 wheelbase
sandrags rail, 860mm wb, hpi running gear, narrowed baja front end for dune racing or custom front for flat racing [IMG]http://i556.photobucket.com/albums/ss9/dunroost/sandrags%20rail/DSC01845.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/sandrags%20rail/DSC01855.jpg[/IMG]
Posted on: 10/25/2011 3:45 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10782384
RE: buckshot racing X2R sand runner
hi built a double bearing holder and put it on a pivit to act as a tensioner aswell [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01785.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01788.jpg[/IMG]
Posted on: 9/17/2011 3:14 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10721399
RE: Full suspension buggy build
hi mate that cool, i dont think my 1936 drummond would do that, you can collect all the swaf aswell under the bench
Posted on: 9/11/2011 4:07 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10711813
RE: buckshot racing X2R sand runner
sounds good http://www.youtube.com/watch?v=K_KwXvtw7QI
Posted on: 9/5/2011 2:52 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10702963
RE: buckshot racing X2R sand runner
will fire it up tomorrow [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01726.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01727.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01730.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01731.jpg[/IMG]
Posted on: 9/3/2011 12:22 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10699781
RE: buckshot racing X2R sand runner
hi building some v8 headers for it now [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01725-1.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01722-1.jpg[/IMG]
Posted on: 9/2/2011 2:30 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10698712
RE: Baja roll cage? STEEL?
hi is it a roll cage or a full chassis your looking for [IMG]http://i556.photobucket.com/albums/ss9/dunroost/sandrail%20the%20story%20so%20far/DSC01605.jpg[/IMG]
Posted on: 9/1/2011 4:11 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10697385
RE: buckshot racing X2R sand runner
hi thanks , going all out to get it done now
Posted on: 7/26/2011 2:43 PM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10640113
RE: buckshot racing X2R sand runner
hi thanks, got aload of fiddle bits sorted, [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01674.jpg[/IMG] steering in and works well, its all adjustable , i have a tiny bit of bump steer which i can live with or will iron out eith adjustment, got to put a second bracket on the upright for the rod end to mount to [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01666.jpg[/IMG] [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01671.jpg[/IMG] front and rear caliper mounts sorted, i made a dummy disc to get the postion right so now waiting for the real ones to get made, twin poys on the front and single for the rear, upright rod end spacer in and give quite good turnning, not as much as a std baja but i can live with that as i run in the dunes mostly [IMG]http://i556.photobucket.com/albums/ss9/dunroost/buckshot%20x2r/DSC01667.jpg[/IMG]
Posted on: 7/24/2011 2:39 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10635911
RE: Full suspension buggy build
hi yea it dont fit inmy workshop at the moment so its all boxed pu till christmas when i move into a larger one
Posted on: 7/16/2011 9:48 AM by Author "stiggwelder"
in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10623842
| 
