|
RE: Other than Zenoah
Here you go Quality engines http://www.iadmodeldesigns.co.uk/ Regards Styk
Posted on: 8/21/2012 1:35 PM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11201191
RE: Evolution 26gt Radial Mount
With the radial mount fitted it is approx 124mm to the back of the prop Regards Styk
Posted on: 8/11/2012 2:10 AM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11189057
RE: 26 gas16/8 or 17/10 prop
17x10 Graupner G-Sonic. That's what i use on my Wot 4 XL fitted with a MVVS 26 and the difference is amazing after a lot of experimenting with different props Regards Styk
Posted on: 7/20/2012 9:22 PM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11163183
RE: 6v Retract Servo for H9 Hellcat
Hi These are ideal and not too much money http://www.hitecrcd.com/products/analog/standard-sport/hs-75bb.html Regards Styk
Posted on: 3/9/2012 11:30 PM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10993793
RE: New ZP Engines from Horizon
26cc 1.4hp@9000[X(][X(] Surely has to be a mistake
Posted on: 2/1/2012 10:44 AM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10938652
RE: New gas engine to think about
Gassers Regards Styk
Posted on: 1/18/2012 1:33 PM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10915544
RE: 1/3 busa pup. Need pilot, who has them?
Here you go http://www.rcmf.co.uk/4um/index.php/topic,88320.0.html Regards Styk
Posted on: 12/23/2011 8:55 PM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10873908
RE: Fuel Barb Soldering Help Please!
electrical solder is fine Styk
Posted on: 12/9/2011 9:19 PM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10852487
RE: gt 33 os engine
Hi Here's the information http://www.osengines.com/engines/osmg1533.html It's quoting 3.84hp @ 9000rpm and i'm with nitrowing on this one it's too small for the P-51. Way better having too much power than too little as you can always use your throttle. A better bet would be a DLE 55 or if you're an OS fan their 55 gasser. Just my 2 cents worth Regards Styk
Posted on: 11/27/2011 10:42 PM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10832359
RE: Large scale warbirds, best ARF for electric conversion?
Hi tigermeet can you show us any photos of your hatch on the skyraider and what size 4 blade prop did you use Regards Styk
Posted on: 11/19/2011 11:09 PM by Author "styk"
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10820332
RE: AeroWorks in Europe
Hi John Does IAD (here in Scotland) not do the Aeroworks range?? Regards Styk
Posted on: 10/30/2011 2:24 PM by Author "styk"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10789639
20cc MVVS????
happy customer Regards Styk
Posted on: 10/12/2011 10:43 PM by Author "styk"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=10762657
RE: ESM Planes - RIPOFF!
the extra costs over here and yes i will still buy them Regards Styk
Posted on: 10/8/2011 11:31 AM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10754827
RE: Voltage regulator for LiFe RX battery?
Hi Henry I think you are absolutely correct in what you are saying and my sincere apologies to you if i in any way sounded dismissive. For the record i have been using Life batteries with JR Rx's and Hi-Tec servos unregulated for a couple of years now and have encountered no problems at all. That's not to say i am right because as i said earlier i totally agree with you. Regards Styk
Posted on: 10/8/2011 9:38 AM by Author "styk"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=10754640
RE: ESM Planes - RIPOFF!
Thanks very much for the link Sonnich. Much appreciated Regards Styk
Posted on: 10/8/2011 9:28 AM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10754623
RE: Voltage regulator for LiFe RX battery?
OK then I wont just tell you that you don't need one when using a LiFe RX battery but i'm intrigued as to why you want to use one when you have already been told that you DON'T need one if using a Life battery for your Rx. Can i ask you why??? Regards Styk
Posted on: 10/8/2011 8:35 AM by Author "styk"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=10754570
RE: ESM Planes - RIPOFF!
Hey guys If you think you're getting ripped off over there you're needing to come over here and then you'll have something to really complain about Example ESM 50cc ME 109 at TBM in the States $549=£350 GBPounds Same plane in the UK $1087 USD=£699 GBPounds Now that is what i call getting ripped off[:@][:@]
Posted on: 10/8/2011 8:26 AM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10754556
RE: World models 80 inch p51 engine advice
[quote]ORIGINAL: rc34074 Styk- I replaced mine with Spring Air 400 series retracts. They are very strong. You will need to change the retract mounting rails to fit them but then I do this with all of my arf warbirds. The Robarts could work too of course. Spring Air is www.retracts.com . [/quote.... regards Styk
Posted on: 10/1/2011 8:34 AM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10743522
RE: World models 80 inch p51 engine advice
you guys think. Any help much appreciated Regards Styk
Posted on: 9/30/2011 10:23 PM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10743114
RE: Prop for MVVS 40cc
Thanks very much for the advice Pe. Much appreciated Best Regards Styk
Posted on: 9/29/2011 1:12 AM by Author "styk"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=10739846
Prop for MVVS 40cc
Hi can i ask your advice on what would be a good prop for a MVVS 40 flying a 9kg 80" span P51 Mustang. Its fitted with a wrapround inverted pitts muffler. I was thinking about a 20x10 what do you think?? Best Regards Styk
Posted on: 9/28/2011 11:02 AM by Author "styk"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=10738607
RE: 26 CC recomendation
seeing that MVVS make Evolution and Graupner engines and are identical i would imagine that the 26 will disappear to be replaced by the 30 at some time. As for them not being available in the US P.e. Reivers in Holland will ship anywhere Regards Styk
Posted on: 9/28/2011 12:34 AM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10737931
RE: 26 CC recomendation
I can thoroughly recommend an MVVS. A real quality engine. The great thing about it is they have now discontinued the 26 and have brought out a 30 that is the same dimensions as the 26 and another good point is it is front induction and side exhaust and fitted with an inverted wrap round muffler gives it a very narrow profile Just my honest opinion Regards Styk
Posted on: 9/27/2011 12:54 PM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10736901
RE: New Seafury from ESM?
Yeah, they are electric. I know YT (here in the UK) are planning to offer electric retracts on their range of esm warbirds Regards Styk
Posted on: 9/27/2011 12:34 AM by Author "styk"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10736007
RE: New ARTF Mosquito - Is there a Market?
I know you are primarily asking the U.S. modellers for their feedback but i thought, would it not be a good idea to also offer it as a ready to paint model (just covered) to give modellers the choice of scheme. I think it would appeal to a lot more if that option was available. Just my 2 pence/cent worth Regards Styk
Posted on: 5/25/2011 6:57 AM by Author "styk"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10539590
RE: Evolution Gas GT vs GX?
Regards Styk
Posted on: 4/30/2011 10:54 PM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10494107
RE: Precedent 1/3 scale turbulent advice please
it was very happy on windy days.hope that helps Regards Styk
Posted on: 4/17/2011 12:17 PM by Author "styk"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10468002
RE: Precedent 1/3 scale turbulent advice please
but if using a petrol you'll end up having to cut half the cowl away Hope that helps Styk
Posted on: 4/16/2011 6:58 AM by Author "styk"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10465906
RE: MVVS or Evolution ???..
it the better it's getting Great Engine Regards Styk
Posted on: 3/3/2011 10:46 AM by Author "styk"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10376677
RE: Blackhorse Cap 232 1.80
[quote]ORIGINAL: Old Fart Hello sticks how did you think it handled with the fg36 powering it? i have the 220 glow engine and like the idea.Might sound silly but i'd like to end up with a cap232 that handles similar to the g4.5 version. [/quote] Hi Old Fart It was fine with the FG in it. Not a rocket ship, i.e. it would lose steam on a vertical, and wouldn't 3d but for nice scale aerobatics it was good. I think your 220 is on a par with the FG in terms of power maybe slightly more
Posted on: 1/9/2011 8:17 AM by Author "styk"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10250169
| 
