does fsgt3b work with brushless hobbies esc?
i have an fs gt3b tx/rx from hobbyhot and i was gonna buy the brushless hobbies 80a esc but ive have heard that the transmitter isnt compatible with those esc's i was wondering if this was true. Any feedback would be appreciated. http://www.hobbyhot.com/Fly-Sky-FS-GT3B-3ch-2.4GHz-LCD-Transmitter-Receiver.html thanks, Eric
Posted on: 6/28/2012 8:29 PM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11135937

underwater ROV
Hello I would like the construction of an underwater ROV. It should be motorized with large wheels and control system. And 4 motors with a propeller underwater. Camera and an underwater flashlight
Posted on: 6/28/2012 3:35 AM by Author "szewang2805" in the forum "User Product Reviews"
http://www.rcuniverse.com/forum/fb.asp?m=11134853

Rc 3ch GHz transmitter & GR3C receiver
Hello, I have a few questions about the : Flysky Rc Fs-GT3C 3ch GHz Led silver transmitter and GR3C receiver 1. Is the above compatable with the Hobbywing Ezrun 9T 4300Kv Rc model brushless motor & WP60 60A esc combo ? 2. Can anyone recommend a compatable servo for steering digital with high torque (middle of the price range)? 3. Can you also recommend a compatable Li-po battery and charger to suit the above combination. I will be using the set up for a drifting car. Many thanks
Posted on: 6/28/2012 3:32 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11134851

RC Micro Receiver
Hi, please tell me which tx will work with the receiver.: Corona RS610II 6ch FM 35MHz RC Micro Receiver thank you.
Posted on: 6/27/2012 3:46 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11133504

motor for 90MMFAN UNIT
what motor would you recommend for a 90MMFAN UNIT has to be 36mmmotor and a (6 blade fan)
Posted on: 6/27/2012 3:25 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11133490

pinion gear
hello, what kind of pinion gear i need on this motor? i want to upgrade my older byggy to brushless and use lipo 2s battery. the pinion i have now is with 20T Here is the details : LEOPARD SKYRC 3300KV 12T Brushless Motor & 60A ESC Speed Controller Combo Motor Specifications Rotational Speed: 3300 KV Turns of the Motor: 12T Max. Amps: 35A Resistance: 0.0225ohm Motor Dimensions (Diameter x Length): 35.8mm x 50mm Shaft Dimensions (Diameter x Length): 3.17mm x 15mm Input Battery Types: NiCd / Nimh / Li-po Battery Recommend Model: RC Model 1/10 Car Net Weight: 172g
Posted on: 6/27/2012 3:15 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11133486

630 kv 8500rpm esc:20a
hi, my plane my moter is a 630 kv 8500rpm esc:20a but it dose not have enuth power will this have more power? thanks http://www.ebay.com/itm/EMAX-CF2812-1580Kv-Outrunner-Brushless-Motor-Skywalker-ESC-40A-original-/300729971334#ht_3617wt_958
Posted on: 6/27/2012 3:11 AM by Author "szewang2805" in the forum "User Product Reviews"
http://www.rcuniverse.com/forum/fb.asp?m=11133484

motor for 3cell lipo
hello, what motor would i use for 3cell lipo thanks
Posted on: 6/26/2012 3:50 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11132107

180A seaking esc
Hi i have a 180a seaking esc with 650mm deep v, What motor would you recommend? plz
Posted on: 6/26/2012 3:06 AM by Author "szewang2805" in the forum "User Product Reviews"
http://www.rcuniverse.com/forum/fb.asp?m=11132085

conversion receiver #FP.R127DF
Hello, I have a duel conversion receiver #FP.R127DF will the crystal (RC Model Tx & Rx FM 72.750 MHz R/C Hobby Receiver & Transmitter Crystal) it work in it and is the channel 48 at 72.750 get back too me? thank you
Posted on: 6/26/2012 2:24 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11132074

RC Car Buggy Truck Track
hi i have a question this engine feat to gs racing strom sut evo?  thanks a lot. [i](Ebay link to SH M28-P3 removed by mods)[/i] Description Specifications   Displacement: 4.57cc Speed: 28000rpm Power: 3.6hp Piston Diameter: 18.5mm / 0.728in. Piston Stroke: 17.0mm / 0.669in. Net Weight: 420g / 14.82oz. Recommend Model: RC Car / Buggy / Truck / Truggy
Posted on: 6/25/2012 3:34 AM by Author "szewang2805" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=11130676

MOVED: RC Car Buggy Truck Track
RC 1/8th Scale Buggies: http://www.rcuniverse.com/forum/fb.asp?m=11130676
Posted on: 6/25/2012 3:01 AM by Author "szewang2805" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11130693

BVM-8S 1-8 Cell Battery
hello, i have a question on the battery is this item able to measure msrx, mcpx and mqx batteries? which mean the plug of this voltage meter is that can fit on my batteries thanks!! http://www.hobbyhot.com/RC-Model-BVM-8S-1-8-Cell-Battery-Voltage-Meter-LiPo-LiFe-NiCd-NiMH.html http://www.amazon.com/Model-BVM-8S-Battery-Voltage-Tester/dp/B006TA2SBY
Posted on: 6/21/2012 11:35 PM by Author "szewang2805" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11127377

28 engine can't keep it running
I am new to rc and have a team lieu eight t truggy I bought this engine for that is there a break in procedures for the new engine and also I'm taking off a .28 engine can't keep it running need help with carb any suggestions who I can get to help me with it to see if the engine and carb is good thank you
Posted on: 6/21/2012 4:09 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11126233

KDS 8XTJ 2.4GHz R/C for JR Transmitter
hello, i want to buy a transmitter module, i would like to buy the model below. Will this work on a JR X388S? http://www.hobbyhot.com/KDS-2.4Ghz-Transmitter-Module-JR-Transmitter.html http://www.ebay.com/itm/8XTJ-2-4GHz-RF-Module-JR-Transmitter-KDS-TR822-/260762273987#ht_3697wt_1185
Posted on: 6/20/2012 9:04 PM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11126072

TORO 150A ESC for 1/8 Car
Hello! will this esc (the two below, i decide to buy) be able to handle a sensorless 7000kv brushless motor 540 size for a 1/10 short course truck running on 3s lipo? if not, which esc is suitable for me, many thanks!!! http://www.hobbyhot.com/TORO-Model-Brushless-Motor-150A-ESC-for-1-8-Car.html http://www.ebay.com/itm/TORO-Model-Brushless-Motor-150A-ESC-1-8-Car-SL760-/390312930941#ht_4293wt_1185
Posted on: 6/20/2012 8:33 PM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11126055

iMax B8 Lipolymer Battery Balance Charger
Hi there, i am interest in buy a iMax B8 Lipolymer Battery Balance Charger. but i have some questions in the usages 1. do I need a ac adaptor to plug into 240v. 2. also how many amps max charge. here is the details of the item, i decided to buy, http://www.hobbyhot.com/iMAX-B8-Balancing-Charger.html http://www.hobby-wing.com/imax-b8-charger.html
Posted on: 6/19/2012 1:59 AM by Author "szewang2805" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11123412

RC Micro Receiver
http://www.ebay.com.au/itm/Corona-RS610II-6ch-FM-40MHz-RC-Micro-Receiver-RV339-NEW-Fast-Ship-/300654934068?pt=Radio_Control_Parts_Accessories&hash=item46006e3834#ht_2914wt_1185 Can I use this receiver to run brushless motors and servos?
Posted on: 6/18/2012 4:35 AM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11122139

clutch bell
the clutch bell i have is 15T-32P. I want to ask the difference between the 2 bearing set below, thanks http://www.hobbyhot.com/RCS-Model-Bearing-Set-for-TEAM-ASSOCIATED-RC-RC10GT-SPECIAL-w-CLUTCH-BELL-BG414.html http://www.ebay.com/itm/RCS-Model-Bearing-Set-for-TEAM-ASSOCIATED-RC-RC10GT-RTR-w-CLUTCH-BELL-BG413-/390366410312
Posted on: 6/18/2012 2:05 AM by Author "szewang2805" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11122072

I am looking for a charger with dual output
I am looking for a charger with dual output (two chargers in one housing) but with a bit higher power capabilities. The Ultimate seems a good choice, although it lacks some of the features I would expect from a charger in 2012. One of which is the possibility to connect it to the PC. I was trying to find reviews, videos whatever to find out more about this charger, but it's probably very new on the market and not many people own it who would publish any info on it. http://www.hobbyhot.com/iMAX-B6-DUO-400W-20A-Dual-Output-RC-Balance-Battery-ChargerDischarger-BC532.html I was wondering if this charger has the same software as the 2x200W one? Can someone verify this?! If yes there should be a way to choose between the temp sensor and the PC connection. I know early accucel chargers didn't have the USB connection, but since the software supported it, a small hack to the PCB was needed and the charger could be connected to the PC! If anyone has some more info on these please don't hesitate to write! Thank you! Norbert PS: While gathering info info I found the same charger under 3 more different brand names (none of them support PC connection):
Posted on: 6/17/2012 10:21 PM by Author "szewang2805" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11121982

New FlySky Radios: GT2B, GT3C, and GT4!
New radios coming soon from hobbyhot FlySky! Not a lot of details on them yet, but it looks like they're coming out with new version of their current car/boat systems, and adding another one to the lineup! GT-3B http://www.flysky-cn.com/eShowProducts.asp?id=46 GT-2 http://www.flysky-cn.com/eShowProducts.asp?id=44
Posted on: 4/22/2012 9:18 PM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11053010

GT3C Transmitter review!
Just received a proto GT3C from Hobbyhot.com, and it is an extremely nice radio comapred to the gt3b. Unfortunately still no word when they are released to the public. These claims are true of my radio, i'm unsure what the productions will be like. So to start off with, the general fit and feel is good, it feels like a solid radio. Part of this is because it Flysky took ergonomics somewhat seriously. Also, the gt3b looked very cheep as well as felt that way, but the new gt3c has alot better appearance to it. It has nice sleek curvers and they ditched the chrome for a nice matte silver Here's a picture right out of the packaging (i didn't get retail packaging, just wrapped up in bubble wrap) Click the image to open in full size. Click the image to open in full size. The first noticeable thing, compared to a gt3b, when picking up the radio is how it fits the hand. My radio had 2 rubber hand grips included, one was labeled S and one was labeled L (small and large i suppose). It may be because i have small hands, but the S size felt more comfortable. It has more curvature for the palm and has a deeper pocket for my thumb to fit in. The rubber isn't a soft silicone like the spektrums, but it is softer than hard plastic and has a nice texture to it. Defiantly a nice addition Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Continuing on with the handle, the buttons are alot easier to use. I'm unsure why at te moment, but i do know that the d/r is alot easier to use now because they radio has alot more clearance in that area for the thumb to bend and pull it back The next area of interest is the steering wheel and its support column. Flysky upgraded the hard rubber into a nice foam grip. But the most notable feature is that the power button is in the center of the wheel Click the image to open in full size. Click the image to open in full size. And the rumors are true, the GT3C runs off a 1300mah custom 1s LiPO, which gives the radio a nice balance and makes it extremely light. It even comes comes with a charger, however i got like a European plug. After reading the manual though, it seems that it can be charged in the radio with a usb cable. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. I mentioned a usb above, well the gt3c has a built in usb, which is intriguing. The manual says its just for charging though...also as you can see a area was added to clip on a neck strap Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Now for the tear down ____ Ok, so i also did a basic tear down, i haven't really inspected anything yet. First thing i did was pop off the power button. It apperas there is two screws and center push holding the wheel on Click the image to open in full size. Click the image to open in full size. back side of the wheel, it has a massive mounting shaft... Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Now, another interesting thing is that the wheel is not connected to the radio via wires, it has some gold fingers and pogo/spring pads. Best of all its connected with some very aggressive socket heads. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. After that "awe" moment, i started to try and figure out how the top came off, and it appears not only has flysky improved the body, its nice underneath as well. Flysky has only two screws and two plastic latches/clibs holding the top on. The screws are on the far back hidden by little rubber inserts, and the plastic latches are similar to the gt3b, but alot more brittle and harder to unlatch (i broke one Embarassed ) After taking its top off it was surprising to see that the whole main board was attached to it. (rubber inserts are on far left, take note of the same crappy screen, but it doesn't have the blue tint) Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. The first thing i noticed was that the antenna is now not a problem when you open the radio, and it appears to me that it be alot easier to fix if it did get pulled off...later i also realized that the 2.4 module is built into the main board, i need to research and see if it still runs off ppm Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Now i took alook at the main IC, it is indeed labeled the same as the ones in the gt3b (i took the picture before i scratched off the paint) Click the image to open in full size. Click the image to open in full size. USB/power area Click the image to open in full size. Click the image to open in full size. Interesting area, possibly for programming, but why so many holes? Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. I then pulled the top plastic off Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. Click the image to open in full size. and the pocket for all of it Click the image to open in full size. Click the image to open in full size. This all i got for now, feel free to ask questions. Thumbs up Share losikid is offline losikid is offline Product Available at www.hobbyhot.com Detailed Product Description 1.FS-GT3C 2.4G 3CH Gun RC System Transmitter/Controller for RC CarTransmitter/Controller for RC Car 2.-Channels:3 Channels; Features -FS-GT3C 2.4G 3CH Gun RC System Transmitter/Controller for RC Car X 1 Product Details 1,Channels:3 Channels; 2,Model type:car/boat; 3,RF range:2.40-2.48GHz; 4,Bandwidth:500Hz; 5,Band:160; 6,RF power:less than 20DB; 7,2.4G system:AFHDS; 8,Code type:GFSK; 9,Senditivity:1024; 10,Low voltage warning:yes; 11,DSC port: yes(3.5mm:output:PPM); 12,ST range:90; 13,TH range:45(F:30;B:15); 14,Charger port:yes; 15,Power:3.7V DC; 16,Weight:330g; 17,ANT length:86mm; 18,Size:151*183*116mm; 19,Color:black; 20,Certificate:CE,FCC; ITEM PACKING FFS-GT3C 2.4G 3CH Gun RC System Transmitter/Controller for RC Car X 1 Set -English Manual X 1
Posted on: 4/19/2012 9:13 PM by Author "szewang2805" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11049385

RE: Ez-run waterproof?
hi, i think that you guy are talking about the new version of ezrun which is water proof http://www.hobbyhot.com/HOBBYWING-EZRUN-WP-SC8-Waterproof-120A-Brushless-ESC-Speed-Controller-Card-CB071.html
Posted on: 3/30/2012 1:10 AM by Author "szewang2805" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11020746

RE: SH .18?
check hobbyhot, they sell SH engine too. [link=http://www.hobbyhot.com/SH-ENGINES/][:D][/link]
Posted on: 3/20/2012 12:53 AM by Author "szewang2805" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11007932

SH ENGINES??
hey im looking for a SH Engine 28 for my truggy roller and i need a motor im not racing it or anything just flogging around my back yard or bmx track ive seen Sh engines all over ebay cheap as chips was just wondering if they are alright or not [link=http://www.hobbyhot.com/SH-ENGINES/][:D][/link]
Posted on: 3/18/2012 8:30 PM by Author "szewang2805" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11006363

Hobbywing brushless system
I just bought this Hobbywing brushless system from hobbyhot and it seems pretty good for the price. you get a 40mm x 68mm 2700kv motor and 120-amp speed control with fan, good up to 4s lipo. I bought the single motor plate and dust cover from the e-revo brushless edition and am using the stock 68 tooth spur gear with an 18 tooth pinion. I mounted the esc with double sided tape, but later found a plastic esc mount, 2-pinion gears, some shrink tubing and screws in the box. The kit also comes with a programming card. Seems like a very complete system and a great price for what you get. [link=http://www.hobbyhot.com/HOBBYWING-XERUN-Series/][:D][/link]
Posted on: 3/15/2012 8:55 PM by Author "szewang2805" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11002075

RE: Flysky FS-GT3B
i think it is a very cheap transmitter set, well done http://www.hobbyhot.com/Fly-Sky-FS-GT3B-3ch-2.4GHz-LCD-Transmitter-Receiver.html i just brought one there, it is out of stock now...
Posted on: 3/14/2012 7:12 AM by Author "szewang2805" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=10999628

Hobbywing XeRun 4168SL 2250kV motor
I just got a [link=http://www.hobbyhot.com/HOBBYWING-XERUN-Series/]Hobbywing XeRun[/link]Hobbywing XeRun 4168SL 2250kV motor this week and must say it is very nice! The overall machining and build is virtually flawless. The front endbell is held in via 4x hex screws and the rear endbell is captured via 3x hex screws. The motor wires are more flexible and the insulation is also softer and more pliable. Overall, a much better looking motor compared to the previous EZRun 1/8-motors. The motor wires also exit through a black rubber piece almost identical to those used on Neu-Castles. Comparing it to my Neu-Castle, it looks just as nice and many characteristics look very similar or identical. I wouldn't be surprised if Hobbywing contracted the same mfr that makes CC's Neu-Castle motors. Supposedly these new Hobbywing XeRun motors are 4-pole. I never got a response from HW when I emailed them to confirm that. So far, the specs shown on chinese RC forums and chinese vendors all say 4-pole. I somewhat doubt that still, but am hopeful they really are 4-poles. I haven't had a chance to install it yet, but hope to soon to check out the performance. Volume-wise, these are slightly larger than the Tekin and Neu-Castle motors since those are 40x68 and this is 41x68. I'd really like to get my hands on their larger 4274SL 2000kV motor. It's 42mm with the machined-in fins, but I believe it's a 41mm case also.
Posted on: 3/13/2012 9:46 PM by Author "szewang2805" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10999303

MOVED: Hobbywing XeRun 4168SL 2250kV motor
RC Electric Off-Road Trucks, Buggies, Truggies and: http://www.rcuniverse.com/forum/fb.asp?m=10999303
Posted on: 3/13/2012 9:46 PM by Author "szewang2805" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11005103

RE: Charging Small Lipo
what is your lipo [link=http://www.hobbyhot.com/HOBBYWING-XERUN-Series/][:D][/link]
Posted on: 3/12/2012 9:09 PM by Author "szewang2805" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10997938