RE: Marutaka (Royal) Cessna L19 BirdDog CG
Hola Humberto Excuse the delay, I was away for a while. I'm starting my build. I think you have something misaligned. Put the plane on a flat surface and check all measurements and the distance between the wingtip and the tail as well as the distance between the surface and each wing tip. Same for the tail. Which engine and prop? Are you sure that the two main wheels are loose enough? Regards
Posted on: 6/10/2009 4:37 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8841729

RE: stafford twin commanche
Hi Dan Hope this helps http://www.rcuniverse.com/forum/m_5218588/anchors_5218588/mpage_1/key_/anchor/tm.htm#5218588
Posted on: 5/14/2009 9:13 PM by Author "szig" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8769710

RE: My Top Flite Piper Arrow finally complete!!
Asif Post many photos as you can. Your Piper Arrow is really wonderful.
Posted on: 4/19/2009 1:35 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8695806

RE: Pilot Lake Buccaneer
Hope this helps http://www.modelaircraft.org/files/plans/pdfs/l-plans.pdf
Posted on: 4/14/2009 10:54 AM by Author "szig" in the forum "Seaplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8680243

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
Ron Thanks for the warning. I put the parts over the plans and the instrument panel needs to be redone. The seats seem to fit better. A minor work considering that I'm building from plans. Regards
Posted on: 4/14/2009 10:29 AM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8680178

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
Ron, please keep us up to date. You are building a winner. I bought a Dynaflite Decathlon interior kit to fit into the Pilot. With minor arrangements I hope this will be good. Thanks.
Posted on: 4/13/2009 10:37 AM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8676555

RE: Degrees into inches to setup controls
Take a look, this could help you: http://www.carbidedepot.com/formulas-trigright.asp
Posted on: 3/31/2009 8:20 PM by Author "szig" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=8636273

RE: Twin sync
http://www.rcshowcase.com/index.html
Posted on: 3/28/2009 12:16 AM by Author "szig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8624292

RE: Sterling PT-17 Plan Sheet 1 Needed
Perhaps you could offer to draw the part templates for them? It seems that they dont have them.
Posted on: 3/26/2009 10:59 AM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8618328

RE: Marutaka (Royal) Cessna L19 BirdDog CG
No hay de que. You are welcome. [:D]
Posted on: 3/24/2009 10:18 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8613440

RE: Marutaka (Royal) Cessna L19 BirdDog CG
106 mm from LE app. 4.25 inchs.
Posted on: 3/24/2009 9:50 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8613299

RE: scale piper cub fuel gauge
Take a look http://www.geocities.com/cubmanky/cubmain.html Regards
Posted on: 3/13/2009 8:11 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8575211

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
Ron As it has been a constant, outstanding work! Terry Any update? Regards
Posted on: 3/12/2009 11:16 AM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8570146

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
What an excellent job Ron, well done!!. Keep up the great work. Regards
Posted on: 3/9/2009 6:06 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8560382

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
Ron You're doing a master piece of art. Thank you very much for sharing the photos and development of your Decathlon. I am currently building one from plans and your input is an invaluable help. Go ahead with the build and please, also continue to share with us your knowledge. szig
Posted on: 3/3/2009 6:52 AM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8538530

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
Hi Terry Your numbers fit with my Pilot Decathlon plans. I'm 99.9% sure this is what you have. The dihedral is 1%. The plans include 4 large sheets. 2 with instructions and 2 for the drawings. I can scan some parts you may need. Since I see, you need the firewall, ailerons, wing struts and where the wing anchor with fuse for the correct dihedral. PM your email and I will send them. Regarding the wing, here are many experts modelers that can show you how best to repair it. Good luck.
Posted on: 2/21/2009 8:42 AM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8501042

RE: ID Kit ¼ Super Decathlon, need advice + rebuild start
Looks like a Pilot Bellanca Decathlon. If so, you have a jewel in your hands. Let me know the wing span, chord, fuse length, at least, and I can confirm.
Posted on: 2/20/2009 8:46 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8499781

RE: Bud Nosen Giant Scale Aeronca Build
Ron Looks really good. Regards
Posted on: 2/9/2009 8:45 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8458801

RE: Pica 1/5 Aeronca Sedan - What engine?
Sent you a PM. Regards
Posted on: 2/9/2009 2:01 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8457121

RE: Dynaflite S.E.5a Biplane
http://www.rcuniverse.com/forum/m_2903268/anchors_2903268/mpage_1/key_/anchor/tm.htm#2903268
Posted on: 2/9/2009 11:31 AM by Author "szig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8456604

RE: Bud Nosen Giant Scale Aeronca Build
Randy You can see posts 9 - 11 for information about the landing gear. For more details we should expect Ron to come back. Regards
Posted on: 2/5/2009 6:39 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8442693

RE: Bud Nosen Giant Scale Aeronca Build
[quote]ORIGINAL: littlera szig, As promised here are some photos of my Precedent Champ. The wing and tail feathers are about done. [/quote] Nice pics. Keep us posted on your progress. Regards
Posted on: 2/3/2009 7:18 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8435258

RE: Pica 1/5 Aeronca Sedan - What engine?
The plans show several alternatives
Posted on: 2/1/2009 10:33 PM by Author "szig" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8428334

RE: Cessna 182
Hi Peter You fell asleep?
Posted on: 2/1/2009 8:42 AM by Author "szig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8425770

RE: Bud Nosen Giant Scale Aeronca Build
. Waiting for your pics. szig
Posted on: 1/29/2009 8:34 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8417254

RE: Bud Nosen Giant Scale Aeronca Build
Hi Randy Please post your pics. Thanks
Posted on: 1/29/2009 4:13 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8416224

RE: Info on - "Balsa, Hardwood and Plywood - Types and Quality"
http://www.pelaero.com.au/density%20chart.htm regards
Posted on: 1/24/2009 9:51 AM by Author "szig" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8394855

RE: Made In The USA
Hi Frank You are really doing a great job. I usually add many links to my favorites and every time I think, now fix. But the number keeps growing and growing. When looking for something, I cant find it. Thank you
Posted on: 1/16/2009 8:10 PM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8366591

RE: Density of lite ply and balsa?
Perhaps this can help
Posted on: 1/16/2009 5:35 PM by Author "szig" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8366081

RE: Made In The USA
Fiberglass cowls and pants: http://www.fiberglassspecialtiesinc.com/ http://www.stansfibertech.com/ http://www.precision-fiberglass-prod.com/
Posted on: 1/15/2009 8:02 AM by Author "szig" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8360337