|
RE: A123 Question
we have what you are looking for.. 2s balance charge lead 24" extension http://www.taildraggerrc.com/a123lipo-batteries-chargers-switchesplugs-ect.html
Posted on: 9/18/2012 5:56 PM by Author "taildragger21"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11232903
RE: TailDragger RC Barnstormers series Pitts 12 bipes
Proto-type video flown by me http://www.youtube.com/watch?v=iL_25qgntrE&feature=youtu.be
Posted on: 8/18/2012 8:40 PM by Author "taildragger21"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11198307
RE: TailDragger RC Barnstormers series Pitts 12 bipes
Thanks for the interest.. We are currently working on the proto-type christen eagle.. The cowl is 13.5" wide so I am not sure on the moki.. Our website is www.taildraggerrc.com Thanks! god bless. chad
Posted on: 8/4/2012 8:39 PM by Author "taildragger21"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11181229
TailDragger RC Barnstormers series Pitts 12 bipes
Ok guys. We have been BUSY working on some new product launch's! We are EXCITED to let you know we have our own exclusive line of aircraft! Two wings are better than one!!!Welcome our Barnstormers series pitts m-12.. There is also a 50cc and 100 cc CHRISTEN EAGLE in the works! Soon we will have to offer a 50cc AND 100-150cc pitts m-12 AND we can do custom covering scemes!! This line has been sold before and many improvements have been made on down the road. Even some I didn't know about and they are pretty impressive. SO PLEASE don't think these are coming from a popular well known direct-buy china website. These are custom built to a much higher standard and include better hardware, covering, and fittings Some features......... Oracover covering (not chinakote) Redesigned I - struts and cabane wing attach points (thumb screws for I-struts and tubed aluminum cabane absolutely no wing shifting unlike the aluminum flatstock) Carbon fiber hardware! NO FLYING WIRE'S REQUIRED on the m-12 Our lightweight aluminum cooling louvers pre-installed into the cowl We don't have an estimated ETA yet but we are looking into late summer/early fall. Also if you guys send me some sketch's we might consider a new color sceme.
Posted on: 7/13/2012 7:45 PM by Author "taildragger21"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11154463
RE: Life battery packs
www.taildraggerrc.com New 2500 mah a123 systems cell made packs available there as well as 1100 mah a123
Posted on: 7/8/2012 9:47 PM by Author "taildragger21"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=11148265
New exclusive 20 AWG multiplex dual extension harness for wing panels
Hey guys. At Taildragger RC we are always coming up with new innovations and ideas to make giant scale modeling more enjoyable. Here is our latest exclusive item.. Running (4) aileron servo's?? Running flaps and ailerons on each wing panel?? Tired of marking and making 4 connections all the time? Here is the ultimate solution!! Two high quality 20 AWG (NOT 22 AWG)silicon copper tinned servo extensions hard wired to (ONE) multiplex high amp connection. Basically run (2) separate channels on your RX and make one connection! Each set includes one Male Multiplex and 2x male jr/universal radio pins and wire and one Female Multiplex and 2x female universal radio connectors all made up and ready to use!. Also includes our new and exclusive transparent BLUE universal connections so you can see you pin connections and quality! Plus you'll know you can only get it at Taildragger RC! Available in 6" and 12" length We also carry a full line of HD 22 AWG and 20 AWG servo extensions. They are top quality and the best price! check them out @ www.taildraggerrc.com
Posted on: 4/18/2012 11:28 AM by Author "taildragger21"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11047347
Taildragger Rc is now offering FREE shipping on 100.00+ orders
Hey guys. We are becoming a premier supplier for your giant scale needs! Just want to give a shout out and a thanks to all of my customers.!!! And to give you my appreciation I am now adding FREE shipping in the lower 48 states on orders of 100.00 or more!!! Thanks for your business! God Bless, chad www.taildraggerrc.com
Posted on: 2/17/2012 5:38 PM by Author "taildragger21"
in the forum "Product Announcements & Manufacturer News"
http://www.rcuniverse.com/forum/fb.asp?m=10963857
RE: JC EVO Engines
I provided the "testing" for the 120
Posted on: 2/16/2012 8:57 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10962616
RE: JC EVO Engines
[quote]ORIGINAL: Cyberwolf I was watching the plane so much I almost forgot to post on how well the engine seems to run and it has plenty of beans for that plane plus. I think if things hold up you may just have a winner. [/quote] LOL!! I is actually the goldwing 36%er.. The first run of them were folding wings.. I fly pretty violent and nothing yet. No signs of internal damage. I believe I got the V3 though.. I am not that good of a pilot but you should see how I pound on my EF 110" yak. Four years of full throttle walls, wide open snap-to-KE, tumbles, blow-overs, ect and it is still holding up! The JC 120 is excellant.. You should see it now after some gallons!! It rips the sbach!!
Posted on: 2/15/2012 7:17 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10959937
RE: JC EVO Engines
[quote]ORIGINAL: Cyberwolf Nice Job Chad, the Sbach is one great airplane I truly love mine. Its only the Pilot 30% but flies in the same manner as yours does. I did fly a smaller version up in Montanna last year and wasn't that impressed, seemed heavy,felt heavy too ! but I could have been the way the guy had it set up,All I know is I didn't have enough elev, or anything else for that matter. YA know one of them there deals when the only thing that goes closed to full is the throttle. [/quote] Thanks!! I have had two 100cc versions and love them!! They are a sexy airplane, dont look like an extra/edge.. Precision like an extra, 3d like a yak.. Just a true all around airplane!!
Posted on: 2/14/2012 10:10 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10959577
RE: Twin 60 CC
Richard... man that engine is sharp! The mufflers look great.. I am happy you like them and glad they fit right. Keep us updated on this beauty!!
Posted on: 2/14/2012 9:07 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10959510
RE: JC EVO Engines
Thanks for the comment on the sbach. Love it. Who did this warranty work?
Posted on: 2/14/2012 8:05 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10959428
RE: MT70CC TWIN
The CRRC 55cc twin is putting out great power with less weight than the 70cc twins. I am swinging a 23x8 on mine and it will 3d my 16 pound 89" MXSR.. Weight on a postal scale including standoff's/bolts/igniton/mufflers is 3 lbs 11.9 ounces. Not bad considering only a 6-8 weight gain over the popular singles. pLUS IT IS much SMOOTHER RUNNING WITH LESS VIBRATION. hAS A WALBRO CARB AND HAS NO DEAD SPOTS THROUGHOUT THE THROTTLE RANGE! Here is a link to a video under the product listing hovering my plane[:D] http://www.taildraggerrc.com/gas-enginespropsspinners-and-engine-accessories.html
Posted on: 2/14/2012 11:57 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10958772
RE: Twin 60 CC
Awesome!!! It was great speaking with you and I will have your mufflers on the way today!
Posted on: 2/11/2012 7:24 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10954045
RE: Brillelli
As far as I know they are no longer making engines..
Posted on: 2/11/2012 7:21 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10954040
RE: Taildragger RC introduces the CRRC PRO gf55cc TWIN
[quote]ORIGINAL: WindGap Anyone know if this engine will fit inside the cowl of a 88'' Yak? 10'' cowl. [/quote] Length plug cap to plug cap 9.75" should fit!
Posted on: 2/9/2012 6:14 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10952031
20 AWG servo extensions
Hey guys. As you may know we have been marketing our new 20 AWG servo wires. Whether you buy them from me or someone else I really feel they are needed application on our newest large airplanes with 400+ OZ digital servo's. The wiring is of high quality tinned copper and gold ends with soft silicon insulation. The connector pins have zero slop and fit tight Soon we will have all popular sizes from 6" up to 48". I am changing all of my planes to them now after I saw the difference! Much less chance of a brown out under current conditiion. My radio has telemety and I noticed a small signal loss on a 50cc (yes 50cc) plane hooked up with a a123 2300 and all 22 AWG wire during snap rolls and other pressured manuevers. Did not experience this with the 20 AWG.. Great prices on them as well!! Prices starting at 4.00 Check them out @ www.taildraggerrc.com
Posted on: 2/8/2012 12:32 PM by Author "taildragger21"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10949930
RE: Need Help!!! Tygon vs Viton
[quote]ORIGINAL: TimBle Tygon, Tygothane, polyurethane, all belong to the urethane family. Slightly different chemistry but all have the same problems of stiffness. [/quote] Not in my experience. Tygon itself is stiff in one flying season. Poly tpu doesn't.
Posted on: 2/1/2012 10:38 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10939686
RE: Need Help!!! Tygon vs Viton
Very similar tot he old aerotrend tubing
Posted on: 2/1/2012 11:54 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10938759
RE: Need Help!!! Tygon vs Viton
Thanks for the kind words old tyme.. The Tubing is A polyurethane corrosion resistant type.. A little stiffer and more translucent than tygon but doesn't get or get as stiff as tygon.... I think you would like it a lot better.. Thanks!
Posted on: 2/1/2012 11:53 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10938756
RE: Taildragger RC introduces the CRRC PRO gf55cc TWIN
Hey Craig. I would expect that plane to be better suited for an 80cc engine.. To large for a 50cc and kinda small for an 100cc.. If I had to pick an engine it would be the se112 given the bare airframe weight. By the time you put in servo's, and other flight gear + an engine your looking over 25 lbs easy.. Thanks!!
Posted on: 1/30/2012 8:25 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10936213
RE: Taildragger RC introduces the CRRC PRO gf55cc TWIN
Craig. Thanks for the question. Is the weight you stated the bare airframe weight?. Do you have. The demnsions of the plane lemgth and wingspan?
Posted on: 1/29/2012 9:57 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10934524
RE: Receiver batteries??
There is a simple fix for the miracle switches.. I Use them and have sold them on my website www.taildraggerrc.com.. I had one break at the solder contacts (on the charge recepticles..) The best fix is low temp hot glue around all solder connections.. Gas engine vibrations cant break the joints this way. Thats the problem with the switch is the contacts are not housed and this happens.. Have flown hundreds of flights with the fix and no issues..
Posted on: 1/28/2012 8:23 PM by Author "taildragger21"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10933151
RE: Need Help!!! Tygon vs Viton
Oldtyme.. Just shipped your tubing out this morning! Thanks for the words guys! You will like this tubing.. I use it on everything from my models to a rotax Ultralight engine! It's good stuff.
Posted on: 1/28/2012 6:48 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10932022
RE: Gas engine for a four star 120
An inexpensive option with great power would be a crrc gp26r .. These mount on beams like the dle 20 and have more power. The latest ones have rc exl ignition as well.. www.taildraggerrc.com
Posted on: 1/26/2012 7:10 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10928570
RE: Taildragger RC introduces the CRRC PRO gf55cc TWIN
Hey guys.. As I said before I didn't start selling a totally new engine to the market.. These 55 twins are/have been available by other couple of reputable vendors.. I have been running my 55 twin a bit on the bench but finally got to maiden it today and my new 89" MXSR.. There have been reports of this being underpowered?? This is the latest version and it is flying the crap out of my 17 pound 89" MXSR and isn't even broken in!! This engine has the best transition I have seen in a while.. Idles down very low. On this video it is swinging a 23x8 carbon fiber prop and as you can see I was comfortable enough to get it on the deck and hover on the second flight!! http://www.youtube.com/watch?v=1oMEgv8qCcs&feature=player_embedded
Posted on: 1/24/2012 3:47 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10925793
2012 "Vette City Big Bird" Bowling Green Ky Giant Scale Event hosted by TDRC
Hey guys! This year we are excited to tell you about our event here in southern KY hosted by www.taildraggerrc.com . All giants are welcome!! IMAA legal. All types considered are welcome as well, warbird, scale, jets, and ESPECIALLY 3D!!! We have a beautiful 800' paved runway with 100' smooth grassrunoffs, shade tree's, and ELECTRICITY. Food available on site. RV's and camping welcome!! 20.00 landing fee DATE: JULY-27-29th Saturday night will have a pilot dinner, live music, and night flying!! Flyer will be out soon!! For more info PM me here or contact me Chad Wilson @ 270-590-0943 or at my website www.taildraggerrc.com
Posted on: 1/19/2012 8:14 PM by Author "taildragger21"
in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10917945
RE: GT-80 and DLE111 Mufflers
[quote]ORIGINAL: OldScaleGuy [quote]ORIGINAL: taildragger21 I have been selling a pair of highly polished dle 111 da100 se 112, ect Smoke mufflers.. Light as the dle stock mufflers and are polished aluminum with smoke coils installed.. I have had several guys use the on GT80's .. They are available @ www.taildraggerrc.com [/quote] The customer service from Taildraggerrc is the greatest
Posted on: 1/19/2012 7:48 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10917907
RE: GT-80 and DLE111 Mufflers
I have been selling a pair of highly polished dle 111 da100 se 112, ect Smoke mufflers.. Light as the dle stock mufflers and are polished aluminum with smoke coils installed.. I have had several guys use the on GT80's .. They are available @ www.taildraggerrc.com
Posted on: 1/19/2012 4:32 PM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10917633
RE: Taildragger RC introduces the CRRC PRO gf55cc TWIN
Hello.. Thanks for your intrest.. I do not plan to be at perry. However you can order it from my website @ www.taildraggerrc.com God Bless, chad.
Posted on: 1/16/2012 9:06 AM by Author "taildragger21"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10911570
| 
