|
RE: Tricking Out Your Ride For Night Driving?
[link]http://www.rcneon.com[/link] do nice lights to....only $30 for a full set(front and rear)...
Posted on: 2/28/2007 2:49 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=5489196
Engine reving unusually
Hey guys, long time....i started up my rs4 the other day and it started to give bursts of revs...now, the throtle wasent twitching ar anything...everything in in order except for the revs...i was tinking its a carb problem or maybe pressure is being lost...what do ye think?? Cheers
Posted on: 12/17/2006 2:58 PM by Author "teamrayman"
in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=5126956
RE: Pull the sleeve out
try pulling the starter...the piston should move it up
Posted on: 9/16/2006 2:19 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4755553
RE: Range and wire
winding up the atenna could mess with your reception, nevermind range. i tried doing it before and my servos kept twithing.
Posted on: 5/23/2006 5:31 AM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4307886
RE: who fancies 20hp+ from your nitro's?
Ha Ha....look at what else he's selling!![X(][8|][:D]
Posted on: 4/27/2006 10:27 AM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4212469
RE: one way bearing
you couldent do that because CA won't stick metal to metal. anyway, if it did stick it, the engine wouldent start cause the bearing would be holding the crank shaft in place
Posted on: 4/23/2006 2:36 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4200525
RE: deagostini astra nitro racer
what? [sm=confused.gif]
Posted on: 4/13/2006 4:57 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4161565
RE: Virtualrc.com Anyone race there?
i just tried to download it but the link doesent work. am i missen somting??[sm=confused.gif]
Posted on: 4/11/2006 5:53 AM by Author "teamrayman"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=4151068
RE: Please Help me !!
the batteries probably went in your tx or rx when you were running at full throttle. happened to me before, now i have battery testers on all my cars.
Posted on: 4/10/2006 5:10 PM by Author "teamrayman"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=4148486
RE: Clutch housing loose for X-Terminator/ruined gears?
The clutch bell should be like that. when you open the throtle, the revs of the engine open up the clutch shoes(CFF) and rub against the housing. don't know bout the gears. is the engine mounten right?
Posted on: 3/23/2006 3:25 PM by Author "teamrayman"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=4072980
RE: Broke the piston skirt!!
my vx-12 has a piece gone out of the skirt too and it works fine but i dont know about yours. there is a reason that hole is there and if it is made bigger there could be problems. it could also weaken the rest if the skirt and fall apart leaving you with a messed up engine. id say get a new piston before starting it. better to be safe than sorry!!
Posted on: 3/13/2006 8:01 AM by Author "teamrayman"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=4027701
RE: mini V8
iv herd of that before. those guys went through years of development in order to get it right. they say that the one in the video is the only one and they are trying to sell it for 250,000 dollars(seen as its one of a kind). the reason it is one of a kind is because the moulds got destroyed in a fire in the lab they were stored. if i was after researching for years to build such a cool engine i would take care of the moulds!!!. i don't really think there is a kit seen as they can't make any more
Posted on: 3/3/2006 4:50 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3986964
RE: has anyone tried this?
$124.99???? it would be way easyer and cheaper to build one!
Posted on: 2/27/2006 7:14 PM by Author "teamrayman"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3968848
RE: cleaning airfilter
i just dip it in a bit of nitro and squeeze it with a cloth. it works well. the filter expands for a while but it goes down after a while.
Posted on: 2/6/2006 4:51 PM by Author "teamrayman"
in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3876649
RE: not enough servo throw
is your throttle working? try swapping the servos and see if it works when you steer.
Posted on: 1/31/2006 1:52 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3849770
RE: not enough servo throw
if you have a digital transmitter you can set the EPA (End Point Adjustment), which will increase the throw. if you don't, you kind of have to stick with it the way it is.
Posted on: 1/28/2006 3:54 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3836460
RE: ANYONE "JUMP" THEIR ON-ROAD?
I cant read right after it!!!![&:][&:][:)]
Posted on: 1/12/2006 2:07 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3765786
RE: removing paint from body
The windows on the body are painted. i just want to the the paint off them.
Posted on: 12/18/2005 6:53 AM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3666008
removing paint from body
Has anyone know how to get paint off my ofna ultra lx comp? thx, Ray
Posted on: 12/17/2005 6:18 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3664578
RE: Flame Thrower Exhaust
Ah..... arnt ye forgetting somting....nitro is flameless!!!! so even if you do try and light up the unused fuel. you wont see it. i started a thread on this before and a few suggestions were made. look it up. heres th link: http://www.rcuniverse.com/forum/m_2377406/mpage_1/key_flames%2Cexaust/tm.htm
Posted on: 12/11/2005 12:09 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3641770
RE: Tower Hobbies selling Mod engines...
anybody got one?
Posted on: 12/9/2005 2:46 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3635957
RE: Pullstart repair
open it up. if the string is not going back in the spring is broken. if it broken where it attaches to the cover its easy to fix. you just need to bend a bit of the spring and put it back where it broke off.
Posted on: 12/1/2005 1:35 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3606957
Ofna Ultra LX Comp
Hey guys, im just wondering what you guys think of the ofna ultra lx comp? im looking for a buggy that wont break the bank and it seems like a good deal. i wont be racing it or anything, il just be using it for bahing around the yard. if anyone has one i could do with some feedback. Thanks
Posted on: 11/14/2005 2:16 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3551496
RE: Tweaking controller
There should be two servo reverse swicthes somwhere on the radio. is it analog or digitle?
Posted on: 10/8/2005 2:23 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3435255
RE: Project 100MPH part2
id like to see a video[:D]
Posted on: 9/9/2005 3:45 PM by Author "teamrayman"
in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=3344133
RE: On road racing areas ( not tracks )
That sounds the very same as the road in front of my house (except for the church thing!). i usualy go out at bout 8 o'clock when the road is quiet and i get myself in a possition where i can see the traffic coming from both directions. It works out fine and my car is still in one piece!
Posted on: 8/31/2005 1:49 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3317072
RE: On road racing areas ( not tracks )
@lordcontrary, whats the road like outside your house?? thats what i use!
Posted on: 8/30/2005 2:23 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3313685
Vantage Tuned Pipe
Hey guys, Im just wondering if anyone has a vantage pipe on a .12 engine? i broke the one on my .12rss and im looking for someting that will give it a bit more power. Are they any good? Thanks
Posted on: 8/29/2005 2:39 PM by Author "teamrayman"
in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=3310167
RE: how to make primerless
[quote]is tehre a way to make a primer tank primerless[/quote] Why would you want to do that????
Posted on: 8/26/2005 2:35 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3301514
RE: engine break in procedures
Leave it on the car and do it. i don't see any advantage of doing it like that. i can just see the engine going flying off!!!![&:]
Posted on: 8/23/2005 2:19 PM by Author "teamrayman"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=3291111
| 
