|
RE: Best sounding model
What kind of engine is a Kolm?
Posted on: 8/15/2012 7:16 PM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11195170
RE: What the....?
A belt right by your leg............................and the heat oh well Darwin laws usually takes care of people who ride stupid things like that
Posted on: 8/14/2012 6:15 PM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11193702
RE: Supertigre 3000
How old is the fuel? had one go the same thing would shut off as if it had a kill switch,changed to new fuel and ran fine.
Posted on: 8/14/2012 1:48 PM by Author "telejojo"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11193408
RE: That nasty AT-6 Bounce
A friend of mine programed the elev. and ails. to go full up when he hit a switch.As soon as the wheels touched the ground he hit the switch and it stuck like glue.
Posted on: 8/14/2012 1:42 PM by Author "telejojo"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11193399
RE: TROY BUILT MODELS
With fuel at 4.00 a gallon for trucks you can forget cheap shipping.......................
Posted on: 8/9/2012 4:50 AM by Author "telejojo"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11186696
RE: OS GT33 33cc gasser
I have a Dynatron on 24v so it's no problem and I found a wire from bat frayed so it was loosing voltage fixed that and now running fine.
Posted on: 8/4/2012 7:44 AM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11180644
RE: OS GT33 33cc gasser
I had an RCGF 26 engine on this plane and was not enough power so I put this 33 on and left the RCGF ign. on and just plugged up the OS 33 to it I wonder if that has anything to do with it? I would'nt think so but I will get it running today or send it back to Tower.
Posted on: 8/4/2012 4:47 AM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11180521
RE: OS GT33 33cc gasser
Well I can't seem to get mine to run,choke it and it pops and then cranks and runs for about 10 seconds thats it until I choke it again and the same thing it pops and take the choke off and runs for about 10 secs.
Posted on: 8/3/2012 3:11 AM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11179377
RE: OS GT33 33cc gasser
I wonder if I can run a 16x10 3 blade? I have an ESM Hellcat I'm going to break it in on.
Posted on: 8/2/2012 1:37 PM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11178801
RE: Most Blatant
I've had 2 or 3 orders with them with no problem but took a long time,I will roll the dice on small stuff but things I need and cost more I use Tower or Hor.
Posted on: 8/1/2012 4:18 AM by Author "telejojo"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=11176955
RE: G-62
Thanks I have a 20x10 Mezjlik 3 blade I may try.It's drilled for a DL50 is it ok to just bolt on like any other prop. with the one bolt ?
Posted on: 8/1/2012 3:44 AM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11176937
G-62
I have a G-62 in my TF corsair and the biggest MAS prop I could find is a 20x10 and the benchmark prop is a 22x10.Flys good but is turning about 8300.Is that too much for a G-62 or should I go with a 3-blade carbon fiber at 90 bucks? I don't want wood one runway strike and thats it.
Posted on: 7/31/2012 6:17 PM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11176551
RE: Batteries, what the?
I use 4.8 2500 packs I put from eneloop and can fly all day on a full charge.
Posted on: 7/27/2012 4:02 AM by Author "telejojo"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11170976
RE: Gas Newbie Question: PTE36R
I have that same airplane with an OS 1.60 and it's plenty.A 35 gas is too much I think it's a light plane.
Posted on: 7/23/2012 2:47 AM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11165414
RE: Giant Scale crop dusters?
Where would you land refill and how much chemical could you carry? not much
Posted on: 7/17/2012 4:08 AM by Author "telejojo"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11158359
RE: AMSOIL SABER 100:1 PRE MIX SYNTHETIC 2-CYCLE OIL AND AMSOIL QUICK SHOT FUEL ADDITIVE
I don't think I would 100:1 in my weedeater........................................
Posted on: 7/16/2012 5:54 PM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11157930
RE: Can Keith Sparks spark the build comeback?
I have been flying arf's for 7 yrs. and decided to build a kit (profile 3d) and made mistakes but but I think I can do better on the next one and it flew great did'nt have to add but 2 clicks of trim.A box of sticks is intimadating for me and everybody who has never built.I'm going to build some more until I can build a 150cc Cardon but that's a few kits down the road.
Posted on: 7/13/2012 4:41 AM by Author "telejojo"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11153559
RE: Shipping through Greyhound
Never had a problem with GH but thats way too long I would call GH and the seller.
Posted on: 7/11/2012 4:01 AM by Author "telejojo"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11151064
RE: AMSOIL SABER 100:1 PRE MIX SYNTHETIC 2-CYCLE OIL AND AMSOIL QUICK SHOT FUEL ADDITIVE
I use Redline at 40:1 in all of my gas engines and clean with no problems, but if works run it it.
Posted on: 7/10/2012 6:56 PM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11150732
RE: professional servo tester (10 in 1 )
Anybody in the US sell them?
Posted on: 7/9/2012 6:53 PM by Author "telejojo"
in the forum "Product Announcements & Manufacturer News"
http://www.rcuniverse.com/forum/fb.asp?m=11149397
RE: Share Your Thoughts....
I think you have been in business long enough to know you can't please everybody and some customers you are better off without,some will cost you money which you really don't need.I've been in the Dry cleaning business for 20yrs and you hate to lose a customer I have asked a few don't come back,and have been told that they will never be back and in a month they are back.I try to take care of my business and do what's right and let the rest fall where it may.I would have charged the 15% unless he spends over 1000 a month
Posted on: 7/3/2012 2:37 PM by Author "telejojo"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11141719
RE: TORA, TORA, TORA, Val has landed
Flew the Val last week for the first time with a DLE 20 and it was plenty. Built a plywood tray above engine and put ign. and A123 battteries for balance plus 1lb. of lead but it flys good.i don't know what the weight is but that big wing floats like a cub.
Posted on: 6/29/2012 4:22 AM by Author "telejojo"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11136191
RE: Opti-kill stays live when Tx shut off
Y the airerons and use channel 6 for the ign. if you still have the switch on it will have power but have never checked to see if it cutoff.
Posted on: 6/26/2012 4:08 AM by Author "telejojo"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=11132114
RE: Top Flite Giant Corsair ARF Disappeared.
Without reading the whole thread what weight are these when done?
Posted on: 6/18/2012 2:42 AM by Author "telejojo"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11122087
RE: Black Horse Models Ju-87 Stuka
Built one this winter and flew a good bit and flys good,OS120 but the wheel pants crack and split and now are just taped on.
Posted on: 6/12/2012 4:24 AM by Author "telejojo"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11115321
RE: New RCXEL 7.4V
I've bought a lot of eneloop bats. and made 4.8 packs and run in my gasser's from 20cc to 100cc and fly all day and never had a problem.............
Posted on: 6/12/2012 4:09 AM by Author "telejojo"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11115308
RE: gorilla glue vs. epoxy
GG works good on Robart hinges................................
Posted on: 6/11/2012 2:33 PM by Author "telejojo"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11114754
RE: D-Day Remembered 6-6-44
[quote]ORIGINAL: Airbrushler Rat Now i took your Dad's pic and cleaned it up a bit hope you don't mind tried to sharpen it up a bit for ya [/quote] Looked like he had a grease gun............................................
Posted on: 6/7/2012 6:12 PM by Author "telejojo"
in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=11110622
RE: NEW Release: Sparrowhawk ARF
[quote]ORIGINAL: edpare Beef up or replace the landing gear wires! Â That Chinese steel is too soft. [/quote] You are right the gear woobles into the skirts and causes all kind of problems
Posted on: 6/1/2012 4:07 AM by Author "telejojo"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11102162
RE: Lock
Had one on mine for a while now works fine.........
Posted on: 5/30/2012 6:58 PM by Author "telejojo"
in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=11100629
| 
