RE: Wanting to get started.
Id rather put my own together, that way i know everything is tightened up right.
Posted on: 5/16/2012 6:41 AM by Author "thecatofulthar" in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=11082853

RE: nitro fuel
I do remember once being told that for .18 or less engines use 20% and for over .18 engines use 30% unless specified otherwise by the manufacturer.
Posted on: 5/14/2012 12:59 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11080502

RE: nitro fuel
Which is why i did not even talk about the engine longevity there's too many variables that play into that aspect of the hobby.
Posted on: 5/14/2012 11:57 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11080437

RE: nitro fuel
First is the thing already broken in? If you dont know ask your buddy, if it is then find out what kind of fuel he was using in it and go with that. Otherwise I'd say just get a good 20% nitro fuel and remember you'll probably need to re tune to the fuel you go with if it is not the same as what he was originally using.
Posted on: 5/14/2012 7:20 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11080142

Hpi savage
Was wondering what battery pack would work for the 4.6 savage, wanting to get away from going through so many aa batteries.
Posted on: 5/14/2012 7:14 AM by Author "thecatofulthar" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11080133

RE: Official Nitro Evader ST Thread v2.0
Ive probably stripped 6-10 of them, tend to get gravel or dirt kicking up and it just kills them.
Posted on: 5/13/2012 5:05 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11079562

RE: Official Nitro Evader ST Thread v2.0
Ive ran an aluminum spur gear on both of my cars so far ive found the stock dtx.18 handles them fine but my OS 18 shreds them like its nothing i can only run the standard nylon ones. You ever tried running one of the aluminum spur gears?
Posted on: 5/13/2012 1:20 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11079346

RE: Official Nitro Evader ST Thread v2.0
Nah i took the modded diff out awhile back only ran it a dozen or so times it didint make much differince from the setup i normaly run, only thing it really broke were my wheels. Photobucket
Posted on: 5/13/2012 1:07 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11079333

RE: Official Nitro Evader ST Thread v2.0
Thats cool, was wondering if maybe you had wrecked it too hard or somthin, did that over the winter and had exploded the entire front end on my stock evader got that fixed but i still gotta replace some parts in the driveline that stripped when it wrecked.
Posted on: 5/13/2012 9:16 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11079123

RE: Official Nitro Evader ST Thread v2.0
Not sure if that would count lol, im still running one of mine gotta replace some parts on my second one.
Posted on: 5/13/2012 8:35 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11079071

RE: Official Nitro Evader ST Thread v2.0
Soooo who is still running their evaders?
Posted on: 5/12/2012 3:00 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11078285

Wanting to get started.
Been into rc cars for some time mostly nitro off road and am interested in getting a drift setup dont care nitro or electric, just looking for a good affordable setup to get started any suggestions are appreciated. thanks.
Posted on: 5/12/2012 2:56 PM by Author "thecatofulthar" in the forum "RC Drifting"
http://www.rcuniverse.com/forum/fb.asp?m=11078280

RE: Duratrax HELP PLEASE
Would suggest this group to ya. Any issues in the future we can usually help. http://www.rcuniverse.com/forum/m_3204076/mpage_401/key_/tm.htm
Posted on: 5/12/2012 2:53 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11078277

RE: Official Nitro Evader ST Thread v2.0
Yeah deffiately a fun mod just make sure to have a few spare axles and such on hand just to be safe.
Posted on: 10/17/2011 4:14 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10769101

RE: Official Nitro Evader ST Thread v2.0
The slipper tightened up on its self and when i got traction this is the resulting damage. Photobucket
Posted on: 10/16/2011 2:18 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10768220

RE: Official Nitro Evader ST Thread v2.0
The diff mod was not mine, if you search back a bit through the post you can find out who it was basicly you make the diff into a locker by drilling the plates and bolting it together. Only downside to it is if you get too much traction you will snap an axle or damage your wheels.
Posted on: 10/16/2011 2:01 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10768199

RE: Official Nitro Evader ST Thread v2.0
Slap it in place and go rip it.
Posted on: 6/16/2011 6:13 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10577817

RE: Official Nitro Evader ST Thread v2.0
take it apart and make sure all the balls are where they should be and that you didint accidently leave one of the old washers inside the diff or somthing.
Posted on: 3/7/2011 10:55 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10386027

RE: Official Nitro Evader ST Thread v2.0
take a pic you've probably put somthing together wrong, and the link is missing for the rebuild kit.
Posted on: 3/7/2011 1:27 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10384891

RE: Official Nitro Evader ST Thread v2.0
Ive got two evaders a savage and a t maxx gotta say the evaders are my favorite once you get the metal diff gear the only thing you really ever will have go out is the spur gear or a cv shaft and ive had both go out on my other rc's if you want a jato either sell your evader and buy one or keep the evader and buy one but believe me their not bad rc's.
Posted on: 2/9/2011 6:22 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10322934

RE: Official Nitro Evader ST Thread v2.0
The metal gear is nice i kept destroying plastic ones upgraded and no prob since.
Posted on: 2/5/2011 8:58 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10315721

RE: Official Nitro Evader ST Thread v2.0
that tank seems pretty sweet
Posted on: 1/20/2011 11:11 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10277557

RE: Official Nitro Evader ST Thread v2.0
however i believe most 200 mm stadium truck bodies will fit you may have to make the holes for them to work though, i remember someone using hpi or hotbodies.
Posted on: 8/29/2010 11:29 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9966990

RE: Official Nitro Evader ST Thread v2.0
ebay...
Posted on: 8/29/2010 11:27 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9966987

RE: Official Nitro Evader ST Thread v2.0
Tower hobbieshttp://www3.towerhobbies.com/cgi-bin/wti0005p?&I=DTXC0062&P=OW
Posted on: 8/28/2010 3:51 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9965566

RE: Official Nitro Evader ST Thread v2.0
Run different clutch shoes, the traxxas ones probably are generating too much friction. Try a stock set.
Posted on: 8/1/2010 10:52 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9903011

RE: Official Nitro Evader ST Thread v2.0
Thats awesome!
Posted on: 7/25/2010 9:56 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9888062

RE: Official Nitro Evader ST Thread v2.0
http://www.rchobbies.org/cars_nitro_tasks.htm
Posted on: 6/21/2010 4:18 PM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9817740

RE: Official Nitro Evader ST Thread v2.0
Yeah i know what your talking about, you'll have to dremel them out too id imagine
Posted on: 6/13/2010 11:18 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9799906

RE: Official Nitro Evader ST Thread v2.0
Unless you extend the adjustment holes on the chassis to make it work, only real thing i can think of that would help. Just take a dremel tool and make the holes a little longer.
Posted on: 6/13/2010 12:00 AM by Author "thecatofulthar" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9799306