RE: Parkzone Spitfire MkII Prop/esc
All Parkzones brushed motor planes do that. I have their supercub and it also continues to spin when the throttle is off. Every once in a while when i fly as SLOW AS I CAN it will stop spinning. (and thats into the wind with a high wing). Dont worry about breaking the prop as long as your going slow enough.
Posted on: 10/2/2009 10:41 PM by Author "tiggerracing" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9142462

Stock speed for the "Dueces Wild"
What is the speed of a non-modified Dueces Wild? Some one had one running 88mph at the field the other day...no lie, we had the speed gun out to read it. I dont know if it was stock or modified.
Posted on: 10/2/2009 10:30 PM by Author "tiggerracing" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9142439

RE: First plane, I want an economic 3D. pointers appreciated
Foamies are good to start with. Some even have better 3D abilities than other materials. Look at Parkzone's typhoon2. Some good advice before going 3D. Have a friend let you fly his trainer first.
Posted on: 10/2/2009 12:26 AM by Author "tiggerracing" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9140373

RE: Parkzone Corsair
First off, asking for help is not being a moron, especialy if its something that can go wrong. Being a moron is not asking for help and having your plane spin in. I also have the PKZ F4U. The fact that its foam will ultimitly tell you that it will be a bit squeaky. Thank of those long road trips on a bumpy road with the foam ice chest in the back of the car driving you nuts. It shouldent seem too flimsy. You are correct about it breaking if you tighten it too much. It should be snug but should not come to a stop when screwing it in. The wing should be flush with the fusalage and should not move up or down. there will be slight horizontal movement though. Hope this helps. Its truely an awesome plane to fly. max
Posted on: 10/2/2009 12:21 AM by Author "tiggerracing" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9140364

RE: Lock
We've got one of those "wells cargo" trailers. Its been completely modified as a sleeping/storage trailer. There is a bed mid-way up the trailer with about 4ft of verticle space below it for storage. It has a small closet, sink, ice box, and TV w/ antenna and capable of being self powered via battery. Rear and side door w/ 2 side windows. Pretty sweet setup for out of state conventions. Dont use it enough so its selling[&o]. Oh well.
Posted on: 10/1/2009 11:27 PM by Author "tiggerracing" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=9140278

RE: Kyosho P40
Very nice advice. For the most part im used to the tail draggers. I have a super cub and a Parkzone F4U. This would be my chioce for a first glow powered plane. Now all i have to do is take my solo on a .40 trainer at the club and i'll be set.....i think. Thanks again for the great info! max
Posted on: 9/28/2009 9:21 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9131465

RE: Kyosho P40
Forgot to mention... Is this plane fairly stable and is the OS.46 a stable engine? thanks again
Posted on: 9/27/2009 8:55 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9128391

RE: Kyosho P40
Ive herd many people putting saito.82 and others in that size. Is that for extreme performance or does it fly better with that sized engine? I dont want to put out alot of cash for my first glow engine, thats why i was woundering if the .46 is a good size. I would like it to fly scale.
Posted on: 9/27/2009 8:52 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9124642

RE: Kyosho P40
Awesome...well not awesome on the problem but i love the color. Would an OS.46 fly this plane well?
Posted on: 9/25/2009 12:21 AM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9122071

RE: Kyosho P40
Ok, i saw it first with the covering shown in that picture and saw the second one (SQS) in camo covering. Are you saying its back to the all OD?
Posted on: 9/22/2009 11:05 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9116832

RE: Kyosho P40
Cool! I remember seeing a HUGE thread on this but a cant find it. it was on a different site. da Rock cant you spray your cowl?
Posted on: 9/21/2009 9:34 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9113818

RE: ~.50 sized F6F HellCat
Oh well. thought i would give it a shot. Thanks for the info though!
Posted on: 9/21/2009 9:04 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9113717

RE: ~.50 sized F6F HellCat
Oh sry didnt mention! I was looking for an ARF.
Posted on: 9/20/2009 11:26 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9111192

RE: P-51D Radiator Grill Pic Needed
WHO! never mind you wont need my pics! nice pics ken-h
Posted on: 9/20/2009 11:06 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9111122

RE: P-51D Radiator Grill Pic Needed
I've got two good ones....well good enough. Im going to have to email them to you.....i have dial up.
Posted on: 9/20/2009 10:08 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9110945

Kyosho P40
Does anyone own this plane or have any good info on it? still looking for a 50 sized warbird and the P40 is a simple favorite of mine.
Posted on: 9/20/2009 9:45 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9110874

RE: ~.50 sized F6F HellCat
It would be my first glow plane and i dont have a full time job so an 82" would not be in my budget. OK! how about a hellcat w/ engine for ~300$. I dont need it a certain size so are there any new recomendations?
Posted on: 9/20/2009 8:54 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9110709

RE: ~.50 sized F6F HellCat
Thanks for the info every one. I had a feeling i would either have to buy an old one that would require home made or specialty parts. Dont think i have much skill for a kit of this magnitude.
Posted on: 9/18/2009 8:25 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9106482

~.50 sized F6F HellCat
Does any one know of a Hellcat that ranges from .40 to .50 2stroke?
Posted on: 9/17/2009 11:27 PM by Author "tiggerracing" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9104598

RE: P-38 BUY
Thanks for the reply! Im realy likeing the look of the Phase3. Now its just a madder of time and money.
Posted on: 9/16/2009 5:43 PM by Author "tiggerracing" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=9101221

RE: Z-poxy not setting?
Thanks for the info everyone. I know i had eqaul ratios though. I probably didnt mix it very well. Im used to the spray on stuff. I'll go re glue.
Posted on: 9/15/2009 9:02 PM by Author "tiggerracing" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=9098776

Z-poxy not setting?
For some reason my 30min Z-Poxy will not set. Im using it on my parkzone F4U which is made of Z foam. I reglued my landing gear a week ago (yup definitly more than 30 minutes) and after i took it up the other day i realized the LG were loose again. When i felt it, the epoxy was slimy and tacky. What im i doing wrong? Thanks for any help. max
Posted on: 9/14/2009 10:19 PM by Author "tiggerracing" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=9096230

RE: Mini P-51D from Horizon/Parkzone
I think it is gear driven. I think thats what i read. Im reserving mine at the LHS on sunday. How great is Parkzone, one day they have the ME109 announced and a mini P51 the next! Awsome work Parkzone!
Posted on: 9/12/2009 9:26 PM by Author "tiggerracing" in the forum "Electric Indoor & Micro RC Flight"
http://www.rcuniverse.com/forum/fb.asp?m=9090520

RE: A-10 Warthog
Cool thanks! Why does money cost work "sigh"
Posted on: 8/23/2009 6:41 PM by Author "tiggerracing" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9038575

RE: Phase 3 P-38
Thanks!
Posted on: 8/20/2009 12:12 AM by Author "tiggerracing" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9029914

A-10 Warthog
Just saw the A-10 West team perform at the Wings Over Wine Country airshow today and was blown away by its capabilities and was just woundering if there was an ARF rc version of this bad @$$ tank buster. Ive seen the one that nitroplanes puts out and herd to many bad things about it.
Posted on: 8/15/2009 11:40 PM by Author "tiggerracing" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9019454

Phase 3 P-38
Are there any P3 P-38 reviews out there? Saw it a while ago and I just saw a real P-38 perform at the Wings Over Wine Country airshow today and that just made me realize that I NEED one.[sm=teeth_smile.gif]
Posted on: 8/15/2009 11:33 PM by Author "tiggerracing" in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9019439

RE: Great Lakes Bipe
Thanks every one. A friend at the local airport has an original 1920's. (a real one) Still rated 100% acrobatic and with the origonal orange and white swooping striped covering. The most awesome biblane in california. Heck! anywhere for that matter. On the side note, if anyone needs some info on it like pics and specs let me know. Thanks.
Posted on: 8/7/2009 8:34 PM by Author "tiggerracing" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8998553

Great Lakes Bipe
Does any one Make a Great Lakes Bipe?
Posted on: 8/4/2009 11:10 PM by Author "tiggerracing" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8990891

RE: Where, if anywhere, is electric pylon racing?
Check it out. http://www.wcflyers.com/ Simple plane but a blast to race. Trying to get a few more electric classes in.
Posted on: 8/4/2009 9:54 PM by Author "tiggerracing" in the forum "Electric Pylon Racing"
http://www.rcuniverse.com/forum/fb.asp?m=8990661