|
RE: O.S. 60GT
maybe OS going out 120CC later
Posted on: 9/17/2012 2:26 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11230762
RE: rear carb
it's just little heavy rear carb for conversion engine , need re design and rebuild crankcase
Posted on: 5/13/2012 9:24 PM by Author "tomyrcmodels"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=11079832
RE: New Zenoahs?
can not use G62 crankcase to fit any Stihl cylinder , need re-design and build new crankcase to do this
Posted on: 4/17/2012 6:27 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11046458
RE: New Zenoahs?
good point :) add 1mm stroke and make more compression then it, can make more power
Posted on: 4/15/2012 7:40 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11042638
RE: New Zenoahs?
Hi W8YE USE MS360 cylinder and make it 35mm stroke is OK, even use MS440 cylinder with 50mm bore and still keep 35mm stroke . that's the idea . dont need same bore or stroke ,make update it little bit and no problem at all
Posted on: 4/15/2012 7:28 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11042624
RE: New Zenoahs?
use Zenoah crankshaft with Stihl cylinder , rebuild the crankcase with reed valve , make it 69CC engine , more powerfull and less weight than G62 ,
Posted on: 4/15/2012 6:11 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11042526
RE: New ZP Engines from Horizon
too bad Zenoah did not have bigger jug like 65 even 70CC , stihl jug too heavy ..................[:o]
Posted on: 2/4/2012 2:21 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10943003
RE: QUESTION: does anyone think there would be much demand for an inexpensive magneto rc engine
it's good things if do have magneto system works that same weight as CDI unit , could not find it .[:o]
Posted on: 2/1/2012 7:23 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10939467
RE: Unkown Engine -Help
Hi aussiesteve You are welcome to visit China to find out how many factory can actually supply to the mass marketed engines . let us know after your trip to China and investigation [:D]
Posted on: 9/7/2011 5:48 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10706338
RE: Unkown Engine -Help
more than thousand factory do casting job , and lot factory do the casting parts like crankcase and cylinder for engine business. even I can not imagin how many casting out there can do or doing this job .............[:D]
Posted on: 9/6/2011 8:24 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10705069
RE: MT70CC TWIN
with about one hour or more pre-running the engine , can sure the engine is good to go. in this way , can offer market with fair price and Under the terms of the Lifetime Warranty.
Posted on: 8/28/2011 7:00 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10691151
RE: MT70CC TWIN
like apple , design and marketing . let's PRO factory to do the ODM or OEM job. it's better way to supply good products and give better support to the user
Posted on: 8/27/2011 6:16 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10689840
RE: MT70CC TWIN
Hi 72. lot lot parts for MT70 .so dont worry about the parts if you need some, :) and I let one big company that have ISO9000 to build my UPDATE engine , and I test run each of them for make sure engine are good and powerful . this the new way for me to do the engine, I think better do the job what I'm good with , it's only for design and marketing , he he. [:D]
Posted on: 8/27/2011 8:56 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10689307
RE: MT70CC TWIN
HI 72 I mean "update some parts' , it's quite BIG update [:D]
Posted on: 8/27/2011 8:30 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10689279
RE: MT70CC TWIN
some parts doing some update now. you will see the new engine soon [;)]
Posted on: 8/21/2011 4:54 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10680634
RE: EME 55 DLE's new Cousin?
sure is good . and this cylinder has nothing to do with DLE55 cylinder . old style or new. as I know EME invest about 15K USD for the mold of cylinder , dont know how much investment total . but sure EME cylinder are not like Milton think , it's OLD DLE55 CYLINDER . you can use GOOGLE PICTURE to find all DLE55 CYLINDER picture and to do compare with EME cylinder . quite different inside and out side
Posted on: 7/27/2011 5:05 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10642119
RE: EME 55 DLE's new Cousin?
HI Milton a you need very close to see the DLE-55 cylinder , old style or new one . and than compare with this EME 55 cylinder , you will find some different [;)]
Posted on: 7/27/2011 7:42 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10641231
RE: Who needs JC engines Area 51 and 102 warrany repairs
I have zero problem about muffler since NOVAYUSA to become our muffler supplyer . and only complain are from some dealer because they lost quite number of sell the replacement muffler for they customer. but it's good for end user . right[;)]
Posted on: 7/22/2011 7:10 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10633296
RE: MT 35 Looks Like a Winner
PM send :)
Posted on: 7/17/2011 5:43 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10625780
RE: MT 35 Looks Like a Winner
www.mtengines.cn
Posted on: 7/16/2011 8:21 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10624531
RE: MT70CC TWIN
two sets for MT70. as quite as MTW can. :)
Posted on: 7/12/2011 5:44 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10617534
RE: DLE111 Hard Start
try use other ignition to start this engine.
Posted on: 7/10/2011 5:14 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10614367
RE: MT70CC TWIN
some twin ignition have programe problem（ including DLE twin ignition during this year) and has been replace by RCEXL. and now quite numbers of MT70 and MT70S sold to Europe and have happy fly .
Posted on: 7/7/2011 11:36 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10611324
RE: MT70CC TWIN
some twin ignition have programe problem and has been replace by RCEXL. and now quite numbers of MT70 and MT70S sold to Europe and have happy fly .
Posted on: 7/7/2011 10:31 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10611322
RE: EME 55 DLE's new Cousin?
yes. , MOLD. the boss of EME said he already invest the mold for 60CC engine. make it like DA60 . parts such like cylinder . piston .con rod. etc need do some investment.....[:D]
Posted on: 6/29/2011 8:29 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10598157
RE: EME 55 DLE's new Cousin?
wrong, they like own invest the mod , even parts look like same . still from different mod and factory
Posted on: 6/29/2011 6:10 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10597946
RE: EME 55 DLE's new Cousin?
some parts maybe made by same factory . most not . interchangable parts can find lot on the market
Posted on: 6/28/2011 10:03 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10597617
RE: OS GT33 33cc gasser
RCEXL ignition system now OEM for OS engine . so later any OS engine will have ignition system that made by RCEXL
Posted on: 6/25/2011 1:06 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10591316
RE: 50cc-ish reasonable $ twin? ISO engine for 12' Tele
70CC twin is ok for this plane
Posted on: 6/16/2011 12:34 AM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10576531
RE: MT70CC TWIN
new cylinder mod need some time. also new assemble line need time too . sure combo to sell plane and engine will be good. depend on what plane fit twin cylinder engine . maybe bigger size like 90 inch Sbach or Yak . :)
Posted on: 4/5/2011 10:07 PM by Author "tomyrcmodels"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10445972
| 
