RE: TOLEDO SPECIAL 40 ARF by Hangar 9
I just traded two helicopters for the Toledo. Got a buch of extra suff with it. It came with a AXI 4130-20 and a hookup with 2 14.8v batteries. I put a 13x8.5 prop on it and getting almost 1000watts. thats about 140watts per pound. Should I go to a larger prop or leave it..
Posted on: 1/20/2012 9:35 PM by Author "tr911" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10919455

RE: Wing Bolt Problem
I recently purchased a airplane that one of the blind nuts had fell out of the wing. It was the one used to bolt the wing to the fuselage. So, I took a piece of nylon cord, about 200lb test, and a 1/2" flat washer. I dropped the nylon cord through the hole into the wing where the blind nut is suppose to fit. I fished the cord out through one of the vent holes and placed the blind nut on it with the teeth in the direction they needed to be. I then tied the 1/2' flat washer to my cord. I eased the cord up until the blind nut was snug to the wing panel. I made sure it was lined up with the hole and pulled it just hard enough to get the blind nut to stick into the wood. I then eased the string and washer back out and put the wing bolt in and tightened it up to pull the blind nut into the wood. After that I carefully let some thin ca run down to the blind nut to make sure it did not come loose again. Walla, job done and ready to go.
Posted on: 12/22/2011 9:25 AM by Author "tr911" in the forum "WildHare R/C Support"
http://www.rcuniverse.com/forum/fb.asp?m=10871552

RE: MKS GY-292 gyro- for digital or analog servo?
I just experienced a burnout on a analog servo using this gyro... for what ever its worth
Posted on: 10/27/2010 7:28 PM by Author "tr911" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10098532