RE: engine and servo 3-views
Pm's sent. Thank you guys.
Posted on: 7/1/2009 4:11 PM by Author "tripxrcer" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8898479

engine and servo 3-views
I use to have fuel tanks servos and engine 3-views. I have searched to no avail. Im looking for standard servos and a .46 engine. I will be using a gms 47 but dont have any with me. Thank you and hope someone has something. alex
Posted on: 6/29/2009 10:04 PM by Author "tripxrcer" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8892736

RE: N-tc3 upgrades for RACING
http://www.powerlineracing.com/index.asp?PageAction=VIEWCATS&Category=249
Posted on: 10/3/2005 2:24 AM by Author "tripxrcer" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=3416667

RE: N-tc3 upgrades for RACING
[quote]ORIGINAL: Piero23 [image]Engine is not a factor[/image] How could an engine not be a factor? If you want to race than concentrate on getting your skill up and your setup dialed and as you progress you will learn what you need. [/quote] i was wondering how long it would take someone to tell me that... I have many skills but want a good starting point with this car... Now onto the helpfull post. Is there an upgraded steering "rack"? Where do you finf the allinone center bulkhead? Thanks Alex
Posted on: 10/3/2005 2:18 AM by Author "tripxrcer" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=3416661

RE: Custom 350 sized brushless boat.. Question
O wow, thats exactly what i was looking for... Can anyone tell me how well my himaxx 2015 4100 will fit in this? Dose it include all drive shafts and prop? How do i join my motor to the drive shaft on this? THanks! Alex
Posted on: 10/3/2005 12:47 AM by Author "tripxrcer" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=3416514

N-tc3 upgrades for RACING
Ok so i have a NTC3, I raced electric onroad a long time ago and i found i never had close to the best car. This time i want to do things right. Engine is not a factor but with all the rest ive got qustions. Do "hop-ups" help the car stay tuned and drive faster. I want a clean set up. So what upgrades should i do? Is aluminum the way to go? or is that just a waiste of money!? Alex
Posted on: 10/2/2005 8:12 PM by Author "tripxrcer" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=3415577

Beginner seeking advice. Need a boat for my engine
Hello everyone, I am new too boats but now that i have a full size water craft i will be spendning much mroe time at the lake. I have a Weed eater engine and lots of electronics. Is there anythig worth wile i can put this into? If not im sure some of you can point me in the correct direction. If ill have to buy an engine ill probly move to nitro, I am interested in catameran style boats as well as V, none of that racing style stuff thanks! Alex
Posted on: 10/2/2005 7:54 PM by Author "tripxrcer" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=3415519

Custom 350 sized brushless boat.. Question
Hey all Ive got a 350 sized brushless motor with lipo batterys and all electronics, i thaught it would be fun to build or modify a small boat to zoom around my pool. I would think with a brushless motor i could get one to go pretty quick but it will have to turn and look good too. I figured this would be a fun experament and if everything goes well i would buy a gas boat... I have no problem working with wood and any style would be fine Thanks Alex
Posted on: 10/2/2005 7:24 PM by Author "tripxrcer" in the forum "Speed - Electric"
http://www.rcuniverse.com/forum/fb.asp?m=3415429

RE: Where is Traxxas
LOL and did i mention buggies are fun to bash because they're so tough and if the offer is still on the table, ill take a sticker
Posted on: 9/19/2005 12:05 AM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3371534

RE: do you want the good news or the bad news?
.
Posted on: 9/19/2005 12:04 AM by Author "tripxrcer" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=3371530

RE: 1st accident
Ive never seen anyone race aluminum a arms? Seems like a lot of dead weight, just dont run into the walls!
Posted on: 9/18/2005 11:56 PM by Author "tripxrcer" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=3371520

RE: I think I fried my steering servo....
Yah, Futaba is were its at, haha. You can get a lot of servo for your money if you go with hitec, but ive never had one that centered... Good luck
Posted on: 9/18/2005 11:47 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3371503

RE: I think I fried my steering servo....
[quote]ORIGINAL: mayhem maniac but the steering servo sucks more power because it's digital. [/quote] Not really.. Your not going to notice a difference... and plus, neither of those servos are digital..
Posted on: 9/18/2005 10:29 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3371270

RE: Official Mayhem Thread
Im sure this has been asked already. But what Bodies from Proline fit the best on the mayhem Thanks
Posted on: 9/18/2005 6:55 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3370634

RE: Buggy with truck body
O yah, I remember now, that place is pretty new hu>? Cool well thanks
Posted on: 9/18/2005 1:46 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3369993

RE: Buggy with truck body
Ahh yes, i like that last picture. Would a Tmaxx Boddy fit like that? Should i change my Gearing to addapt to the larger tires? Or dose it not mater too much for bashing, no track around scottsdale races 1/8 or .21 MT ...
Posted on: 9/18/2005 12:37 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3369828

RE: Buggy with truck body
Well im not really looking to make it a truggy, I think the wheels make it look more scale... I mainly only need a body that wide and the mounting posts.
Posted on: 9/17/2005 10:03 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3368437

Buggy with truck body
I have a mayhem buggy and i would like to do this, just to screw around. Can someone tell me where to buy the body mounts. Thanks
Posted on: 9/17/2005 12:08 PM by Author "tripxrcer" in the forum "RC 1/8th Scale Buggies"
http://www.rcuniverse.com/forum/fb.asp?m=3367223

RE: Smoke system.. How much weight?
Haha so there is hope! lol... So can i heat the oil by running it thru brass tubes around the engine heat sink? That wouldnt add weight... Alex
Posted on: 8/5/2005 8:04 PM by Author "tripxrcer" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3235438

RE: Smoke system.. How much weight?
So would you say its a waste of time? Maby ill just run heli fuel :P Are there any Lighter weight alternatives? Like no pump? Alex
Posted on: 8/5/2005 4:58 PM by Author "tripxrcer" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3234941

Smoke system.. How much weight?
I would like to put a smoke system on my .91 fx engine... Now i know there are a lot of threads describing smoke systems but i have yet to find out how much weight will be added. Can anyone tell me how much this weighs? Is it for larger setups? http://www.jcwhitney.com/webapp/wcs/stores/servlet/Product?storeId=10101&Pr=p_Product.CATENTRY_ID%3A2004483&productId=2004483&catalogId=10101 If so i think i wioll jsut go with the TIME set up. But they do not say how much it weighs... Here are a few kits i am loooking at http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXTU95&P=ML http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHS71&P=ML Thanks Alex
Posted on: 8/5/2005 1:55 PM by Author "tripxrcer" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3234423

RE: Which tools do i need to build models the right way!
Hey thanks mimhoff thats perfect! thanks! THanks guys for the help! ill let you know how my shoping spree turns out! Alex
Posted on: 6/27/2005 11:08 PM by Author "tripxrcer" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=3116204

Which tools do i need to build models the right way!
Hello! I have built a few small electric balsa kits aswell as a few ARFs. Can someone help me select the tools used to build a kit. I know you can build a model with little or no tools but i would like to start the right way. Im not looking to buy every tool you can think of but if you could give me sugestions and links it would be a big help! Thanks Alex
Posted on: 6/27/2005 9:11 PM by Author "tripxrcer" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=3115724

RE: de havilland sea vixen... RC need help with airfoil
Haha yah i would love too... Duct fans cost a ton last time i looked but i will think about it... haha need an airfoil first. Alex
Posted on: 6/5/2005 3:55 PM by Author "tripxrcer" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=3044420

de havilland sea vixen... RC need help with airfoil
Hello I have started designing a havilland sea vixen, the MK1 version... This will be my second design and scratch built plane. Can anyone give me an airfoil too use? It will be powered by a .40 with a pylon speed prop, most likly pulling, Thanks Alex [image]http://home1.gte.net/lbalders/duxford.jpg[/image]
Posted on: 6/5/2005 2:53 PM by Author "tripxrcer" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=3044273

.40 power pod?
Do any of you know where i can get a power pod for a .40 engine? Its not going on a sail plane or a plane for that matter. I need to modify it for a flat base aswell. Any tips would be helpful Thanks Alex
Posted on: 5/21/2005 11:28 PM by Author "tripxrcer" in the forum "RC Gliders, Sailplanes and Slope Soaring"
http://www.rcuniverse.com/forum/fb.asp?m=2998117

your experties needed on a restore
Hey well, Im pretty sure you guys will be able to help me the best so i deisded to put this in the forum. My very first plane was a Kit KAOS that was given too me. Ive had many more planes since then but i still think it is the best flying plane i own. I want to Restore it and wile i have the covering off id like to do some modifications to make it lighter. Can you guys give me some tips? What are the most effective ways to shed ounces? How much more do retracts weigh than standard? I know its a real pain in the @$$ but it would defanently make my KAOS original [:)] opinnions please [:D] Alex
Posted on: 2/24/2005 11:07 PM by Author "tripxrcer" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=2697481

RE: .46 plane/engine combos. please help
o well ion that case ill stay with the .46 plane for a wile
Posted on: 2/1/2005 10:47 AM by Author "tripxrcer" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=2608254

RE: .46 plane/engine combos. please help
Will the .91 engines do the same for the 60 sized UCANDO>? I am looking into this plane aswell. I have servos strong enogh. If i went to the 60 sized what engine would you recamend? Thanks Alex
Posted on: 2/1/2005 9:40 AM by Author "tripxrcer" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=2608033

RE: .46 plane/engine combos. please help
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGTG7&P=0 Oops i found it... Exspencive, but ive herd good things about YS... seems complicated to tune
Posted on: 1/31/2005 8:19 PM by Author "tripxrcer" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=2606939