|
RE:
Bill, PM sent. Thanks, Bryan
Posted on: 6/25/2012 10:48 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11131214
RE:
Any word on the gear fit and function? I could probably afford a set of these pretty quickly, and get busy on my 310! Bryan
Posted on: 5/26/2012 5:50 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11095209
RE: Another Dick Barron Stearman...
I believe Hitec 645mg servos will work fine, and are reasonable, especially if you run them on 6 volts.
Posted on: 5/2/2012 1:29 PM by Author "warbirdmustang"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11065747
RE: Contemplating a D.S. B-29 169
A hell of a lot of building, but defiantely an enjoyable project! I have the DS plans for the B17, but then I got a deal on an American Eagle kit, so I'll be building that one instead. I'dlove to build the 29! I also have an American Eagle B25 in the wings, you got to love these bombers! Bryan
Posted on: 4/29/2012 5:54 PM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11061761
RE: Another Dick Barron Stearman...
How are you doing the landin gear on this plane? I have one that I bought built, but needs a ton of work. I had stalled out on repairing it also, but I got a cockpit kit and dummy radial for it for Christmas, and have kind of been itching to work on it again. I believe I have a complete set of plans, would you be willing to copy or email the instructions for me? I'd gladly cover your cost. Thanks! Bryan
Posted on: 4/29/2012 5:45 PM by Author "warbirdmustang"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11061748
RE: Seagull's
Stick, I mean, I know we are among friends here, but I don't think I would tell anyone that I bought a metallic purple FW190!LOL! Did you promptly remove the covering, and dirty it up in a much needed fashion?
Posted on: 4/27/2012 3:52 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11058744
RE: Building a Dynaflite Super Decathlon
Looks like that airplane wasn't given sufficient time on the runway to build speed, pulled up to abrptly, and snapped to the right. No offense meant, but it looks like it COULD be just a little ahead of it's pilot. Is this the airplane with the built in twist to the wing? That might explain it's flight characteristics also. Just my opinion. Bryan
Posted on: 4/27/2012 3:50 AM by Author "warbirdmustang"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11058743
RE: Seagull's
Monokote on a warbird is like taking the ant christ to church! It aint a gonna happen!LOL! White is a nice color for a sport plane, I could also use some of that flor. orange stuff for a seaplane I'm scratch building, just some ideas!
Posted on: 4/26/2012 12:28 PM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11057826
RE: Seagull's
Just about anything would work, whatcha got? I mean, a roll of covering would be a great trade! I just want to see someone use them, and I'm mostly trying to make it worth my while taking them to the post office and looking for a box! Let me know, and we can make them yours! Bryan
Posted on: 4/24/2012 4:56 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11054654
RE: Seagull's
Guys, I have a set of nacelles and decals for this plane left over where I modified mine. If someone canuse them, trade me something useful and I'll get them to you. Otherwise I'm throwing them in the trash. Thanks! Bryan
Posted on: 4/22/2012 6:21 PM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11052786
RE: FIRST CLASS PAINT
What would a paint job like this cost on a 46" deep vee( it's an Easy Vee by Zipp Kits? I like the black with green ghost flames about half way down the first page. I am in Evansville fairly often for business. Thanks, Bryan
Posted on: 3/21/2012 10:08 AM by Author "warbirdmustang"
in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11009605
RE: Building a Dynaflite Super Decathlon
I think I am finally ready to start building mine, so I'm subscribed! Bryan
Posted on: 2/22/2012 2:15 PM by Author "warbirdmustang"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10971079
RE: who makes the best scale P-51
Interesting thread here, guys! I have the Bud Nosen and the TF kits both, and am contiplating selling both and building a Ziroli, but now I don't know. I have a Byrons 4 blade prop drive I want to install in the TF, but maybe a Ziroli with the Mick Reeves gear drive for the G62? Money is a consideration with me, but maybe I just need to collect pieces longer and build one good one. I know for sure I like Sierra gear better, as far as asthetics go anyways. I'd like my Mustang to have a near scale prop, as this was a very prominate feature of the full scale. What do you guys think? I'm also considering the glass fuse from Ziroli. Thanks, Bryan
Posted on: 2/11/2012 12:42 PM by Author "warbirdmustang"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10954422
RE: who makes the best scale P-51
Interesting thread here, guys! I have the Bud Nosen and the TF kits both, and am contiplating selling both and building a Ziroli, but now I don't know. I have a Byrons 4 blade prop drive I want to install in the TF, but maybe a Ziroli with the Mick Reeves gear drive for the G62? Money is a consideration with me, but maybe I just need to collect pieces longer and build one good one. I know for sure I like Sierra gear better, as far as asthetics go anyways. I'd like my Mustang to have a near scale prop, as this was a very prominate feature of the full scale. What do you guys think? I'm also considering the glass fuse from Ziroli. Thanks, Bryan
Posted on: 2/11/2012 12:38 PM by Author "warbirdmustang"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10954417
RE:
Engine, Send me your address, and I'll send you mine. I'm pretty sure my kit has them, and I will be installing retracts, so I won't need them. THanks! Bryan
Posted on: 2/10/2012 5:26 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10952505
RE: Seagull's
I'll try and get some photos loaded ASAP to show the difference. I'll be making a pair of glass cowlings to fit, and hopefully it'll have a little different look! Bryan
Posted on: 2/3/2012 5:07 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10941539
RE: Seagull's
Guys, I have a NIP set of engine nacelles and decals for this plane I would sell or trade if anyone needs them. I am building mine, nearly finished, and I made nacelles and am making cowlings to make it look more like a Beech Duke, so I won't need these. Hopefully someone can use them. Thanks, Bryan
Posted on: 2/2/2012 5:40 AM by Author "warbirdmustang"
in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10939926
RE: American Eagle B-17 Build
I think I would call Bob at Quality Fiberglass and inquire about this. Bob is a pretty talented guy, and has built these airplanes. He's the one that makes the kits. His number is on the American Eagle website. He may be able to give you some help, couldn't hurt to call him. If nothing else,maybe it'll make him aware of a problem he can fix on future kits. Keep going, almost there! Bryan
Posted on: 1/30/2012 5:00 AM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10934745
RE: Bob Nelitz 1/3 Scale J-3 Short Kit build
Thanks for the pics, Don, I'm sure they will help. I also just sent you a PM on the parts with an update. Would I be able to just mig this stuff? I don't know how to braze, and I'm sure I could silver solder, but I can dang sure mig weld this. Penny for your thoughts, guys! Bryan
Posted on: 1/6/2012 7:40 PM by Author "warbirdmustang"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10895591
RE: Bob Nelitz 1/3 Scale J-3 Short Kit build
Don't want to step on any toes, but there was an ad here very recently for someone selling the laser cut metal parts for the Nelitz cub here on RCU. DOn't know who it was, and the ad is gone. I believe they were asking 40 bucks for the set and had several to sell. Any help would be appreciated. Myself and two buddies want a set, I think we are going to build three of these! THanks for the help! Bryan
Posted on: 12/28/2011 8:03 AM by Author "warbirdmustang"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10879512
RE: American Eagle B-17 Build
Looking great, and it has me wanting to start on mine! I got hold of Bob Sealy, apparently he had a run in with a table saw and cut some fingers. He is supposed to be shipping the rest of my parts on Monday! I can't wait to build this ship! Bryan
Posted on: 11/18/2011 9:46 AM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10818151
RE: American Eagle B-17 Build
Speedbrake, I have his address, as I actually went to his house and got the stuff I have. I have been waiting on the other parts for a couple of months now at least, and haven't been able to reach Bob for at least a couple of weeks or more. Just wanted to see if anyone else had been in contact with him. Thanks! Bryan
Posted on: 11/16/2011 1:44 PM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10815226
RE: American Eagle B-17 Build
Is anyone having any luck getting hold of Bob Sealy at Quality Fiberglass(aka American Eagle)? I have been trying for some time now, he owes me some clear plastic parts for my 17 and also for a B25 kit I bought from him a few months ago, but I can't seem to reach him or get a return phone call. Hope all is well with him. Thanks, Bryan
Posted on: 11/16/2011 9:42 AM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10814861
RE: ARUP S-2 from Flying Models plans
Arup does have experience wih an ARUP! Interesting design, make sure the cg is right or you won't like how it flies. I'd speak with RCU member ARUP, he knows this girl well!
Posted on: 11/9/2011 4:56 AM by Author "warbirdmustang"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10803874
RE: American Eagle B-17 Build
I have one of these, with the Likes retracts I'm getting ready to start building, so I'm subscribed! Bryan
Posted on: 11/4/2011 10:51 AM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10796693
RE: Sig Morrisey Bravo Build
Sounds like a nice weekend trip to me, I'll be watching! Thanks, Bryan
Posted on: 10/20/2011 5:13 AM by Author "warbirdmustang"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10774313
RE: Sig Morrisey Bravo Build
How far is that from Louisville, maybe I can get mine built and attend if you guys open it up to "outsiders"!!LOL! Bryan
Posted on: 10/20/2011 5:07 AM by Author "warbirdmustang"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10774309
RE: Byron reduction drive on TF 1/5th P-51 Mustang models
I also have a byrons drive unit that I was planning to install in my TF mustang kit, so I'll be watching as well! I have held mine up to the plans, and I think it can be done.
Posted on: 9/5/2011 6:55 AM by Author "warbirdmustang"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10702266
RE: Topflite Mustang prop?
Try a Zinger 18 6-10 on it and see what happens. My 41's like that prop. As far as the engine, I've seen the B model fly, painted and all, with a G38, so I know the 41 will fly tat bird. Stupid question, but have you set the carb needles properly? Maybe an adjustment is in order. The US41 is a Quadra, and they have been flying airplanes for a long time.
Posted on: 7/11/2011 4:44 PM by Author "warbirdmustang"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10616784
RE: 50% off at the Air Age store
I just ordered a bunch of plans from them and all went well. The 50% off sale is awesome! I got both books of the Wylam drawings also 1/2 off!
Posted on: 7/9/2011 9:01 PM by Author "warbirdmustang"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10614117
| 
