|
RE: Official HPI MT2 Thread
Thanks to all
Posted on: 4/9/2010 12:31 PM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9648807
RE: Official HPI MT2 Thread
But will it work?
Posted on: 4/9/2010 11:36 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9648699
RE: Official HPI MT2 Thread
I was wondering if this gear will fit on a MT2, Or if there is a better one than stock. Thanks http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001188881&I=LXPBM9&P=K
Posted on: 4/9/2010 10:27 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=9648548
RE: Need some Lipo advice
If you could please explain why anything above 2 cell will kill my motors.
Posted on: 8/6/2008 2:27 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7814414
Need some Lipo advice
I want to run a Lipo battery in my clodbuster. I'm running a Novak Super Duty XR with two 12t double motors. I know I need the Novak Smart Stop Lipo cut off module. But what I don't know is what would be the best battery. I do a lot of racing so speed would be better. I 'm thinking Of a 4s lipo but I don't know what C or mAh would be best. Any advice would be great thanks.
Posted on: 7/30/2008 4:58 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7787686
Mystery brand chargers
Was just wondering if anyone here has used or owned this type of battery charger before. Would like some feed back before I buy one. Looking to charge Receiver hump packs, 7.2v stick batteries, and Lipo. Thanks for any info in advance. http://cgi.ebay.com/Mystery-B6-LI-PO-Lipo-6cells-RC-Battery-Akkus-Charger_W0QQitemZ130240898856QQihZ003QQcategoryZ34056QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Posted on: 7/23/2008 6:52 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7762397
RE: Stampede wheelie bar
That's not going to work with a Nitro Stampede. That set-up will only work with a electric Stampede, Rustler, or Bandit. Not to mention your going to spend $21.25 for something that cost $12.99 at Tower Hobbies http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXRNP7&P=ML I would do a little more research first IMO.
Posted on: 4/28/2008 3:09 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7429153
RE: T-maxx motor mount Need help
Thanks for the answer. Does anyone know where to get a motor mount that will fit a .21 and the stock chassis. Thanks
Posted on: 4/15/2008 1:19 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7375365
Duratrax Maximum two speed question
Need to know which way to turn the adjustment screw for sooner and later shifts. Thanks
Posted on: 4/14/2008 3:31 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7370369
T-maxx motor mount Need help
Wondering if anyone has bought this motor mount and put it on a 2.5 T-maxx stock chassis. Need to know if it fits or if you have to buy the .21 conversion chassis. Thanks in advance. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKHF1&P=7
Posted on: 4/14/2008 12:44 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7370077
RE: What Kind of Trucks
I couldn't find it on there but thanks for the link. I just found out I have been sitting on a Kyosho Raider for the last few months.
Posted on: 3/27/2008 7:07 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7289733
What Kind of Trucks
Having some trouble trying to find out what kind of trucks these are. I think it Koysho but I could be wrong. It looks like it has an old chain drive system. All I need is what brand and the model name. Any help would be great thanks.
Posted on: 3/25/2008 6:24 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7278296
RE: let me know if i can do it...
Pretty sure you will need a releasing agent between your CF and Alloy. Roughly about 8 coats or they will stick together.
Posted on: 3/18/2008 2:59 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7242388
RE: Official Traxxas Nitro Rustler 3.3 Thread
Well I don't know about the rest of you guys but I have been my Rustler all winter long. Cold weather never bothers me[:D]
Posted on: 3/17/2008 4:45 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7237211
RE: Official Traxxas Nitro Rustler 3.3 Thread
[quote]ORIGINAL: MJAsony2305@aol.com yeah dude it don't matter this is just the suped up rustler thread LOL[:D] [/quote] I know I was just messing around. I signed on and noticed no one had replied that day and decided to bump it but I couldn't think of anything to say.
Posted on: 3/12/2008 1:43 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7212788
RE: O.S. 21 RG
I have an O.S 18mt in my T-maxx now and I love it. But if I can get a 21RG for $35 I was just wondering if I should take it or not. Guess I got my answer. Thanks everyone.
Posted on: 3/12/2008 1:33 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7212767
RE: Official Traxxas Nitro Rustler 3.3 Thread
If I take out my Trx3.3 in my Rusty and put in a O.S. 18 can I still post in this thread or do I have to go back to the other one?[:D]
Posted on: 3/11/2008 1:52 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7207337
RE: O.S. 21 RG
[quote]ORIGINAL: HpiDrifter420 where did you get that engine im trying to find one for my usa1 nitro crusher. i still have the stock one but it seized up on me [/quote] I didn't I was out bid on E-bay at the last minute by a $1. It sold for $26.00 and it ran fine. (So they say). I just came across it and I thought I would give it a shot. I have never heard of this engine so thanks everyone for your replies.
Posted on: 3/11/2008 1:49 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7207328
O.S. 21 RG
Is anyone running one of these in a T-maxx. If so what do you think?
Posted on: 3/10/2008 7:22 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7202415
RE: Official Traxxas Nitro Rustler 3.3 Thread
I think my post got deleted for some odd reason so I'll post it again. Here is my (just finish) 3.3 Rustler.
Posted on: 3/5/2008 4:38 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7177726
RE: rustler 2.5 issues I needs help!
How long are you letting it idle before your giving it gas?
Posted on: 2/26/2008 5:13 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7138823
RE: Official Traxxas Nitro Rustler 3.3 Thread
Anyone know whats a better gear ratio for speed? I'm running 24p 72s on mine.
Posted on: 2/26/2008 1:53 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7138577
RE: Past and present integy owners and shock masters help me out with my t-maxx 3.3
I run these shock on my T-maxx, Clod, Stampede, Rustler, Almost everything I have. I like the looks but that's about it. As far as bashing I have never had any real problems. As far as leaking I stopped using oil so no problems. The Shock rods bend and some times break, but as far as the shock bodies I've never damaged one. Different things happen to different people.
Posted on: 2/20/2008 6:05 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7105847
RE: so what are those blue things?
Yes that is an engine mount. Don't worry you won't get it with the new engine you have to pay extra to get it.
Posted on: 2/20/2008 5:51 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7105828
RE: Fail safe problems
OK you all are right I did a newb mistake.(Not enough info) I was running 4 Energizer maxx AA with one tower hobbies standard servo and one high torque servo. Ran one set of questionable batteries and one fresh set. Also happen to have two of these fail safe and both did the same thing. The only lights that came on where normal. Green when it was running and red when in lock out.
Posted on: 2/20/2008 1:34 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7105418
Fail safe problems
Ok I'm running a Duratrax fail safe in a buggy. Now after 5min of running the fail safe trips my servo and will not reset. I can still steer but the throttle servo will not move until the car is shut off and turned back on. At first I thought it was the batteries but I replaced them with fresh and it still happens. Any thoughts
Posted on: 2/19/2008 1:42 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7099529
RE: Nitro battery question
In an electric RC the ESC is powered by one or more 7.2v batteries. If I understand what you guys are saying then the ESC is only putting 6v to the receiver and no more? I thought the ESC gave all the voltage to the receiver and the receiver knocked it down to 6v for the servos.
Posted on: 2/19/2008 1:07 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7099444
Nitro battery question
OK if anyone has any intel to this question I would love some. In a Nitro RC most people would run 4 "AA" batteries to the receiver giving 4.8v. Now a receiver will put out a max of 6v. So why not use a standard 9v battery.
Posted on: 2/18/2008 5:23 AM by Author "whiteshark107"
in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=7093952
RE: Gotta love the look of new RC
Actually since the 2.5 and the 3.3 are basically the same size case wise. The .15 to 2.5 upgrade kit from Traxxas will let you drop in your 3.3 with no problems. I just think the stampede exhaust is better looking. I guess I will have to try it out. Thanks
Posted on: 2/18/2008 5:04 AM by Author "whiteshark107"
in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=7093935
RE: What is this?
[quote]ORIGINAL: kd7oir I'm getting the GPM cvd kits, alloy hubs, new tanks and tires for them both. I do have a question about the ball diffs, are they recommended? Thanks Shawn [/quote] Unless you found some for really cheap, I wouldn't bother.
Posted on: 2/18/2008 4:48 AM by Author "whiteshark107"
in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=7093927
| 
