RE: Ziroli DC-3
Us 41 w stock mufflers
Posted on: 9/10/2012 1:57 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11224087

RE: Looking for builder
Brian, Drop me an email, wings2n3@gmail.com or phone number so we can talk, I am in Monroe ,NY Jay
Posted on: 9/9/2012 6:17 PM by Author "wings2an3" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11223169

RE: BUD NOSEN 1/4 scale CITABRIA BUILD COMPLETION
I emailed him, he is a farmer and is very busy with farming now and will not cut any short kits till after thanksgiving, that was his reply.
Posted on: 8/17/2012 12:00 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11197046

RE: GTM 1/2 Scale Fokker Triplane
Additional photos
Posted on: 8/13/2012 1:54 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11191985

RE: GTM 1/2 Scale Fokker Triplane
Cowl has been painted, made my own plate, have not finished all the rivit detail. Running out of time for Rhinebeck, vacation time is over and other committments are getting in the way. Need to CG it and test run the engine next.
Posted on: 8/13/2012 1:50 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11191979

RE: GTM 1/2 Scale Fokker Triplane
Glenn's metal cutter has slowed down the finishing of this build. Was hoping to have the oppurtunity to fly at Rhinebeck, this Sept. May make it without all the finishing touches.
Posted on: 8/3/2012 4:15 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11180070

RE: Phillip Kent 1/4 scale Aeronca C-3
A buddy of mine is building this one and an other friend has just finished a real one an flown it. If you additional infomation email me wings2n3@gmail.com. Jay
Posted on: 7/21/2012 8:02 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11164024

RE: RALLY OF GIANTS 2012- NewYork.
Thanks to the club and a great CD with a fantastic sence of humor, it was a great time.
Posted on: 6/25/2012 6:55 PM by Author "wings2an3" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11131850

RE: Great Lakes Biplane Kit???
contact, aeroplaneart@aol.com he has plans
Posted on: 6/24/2012 6:26 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11130342

RE: 1/4 Scale Stinson Reliant
Tom, Your building is an inspiration and fantastic. What is the material used to make the skins and any special technique. Jay
Posted on: 5/25/2012 3:34 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11094687

RE: GTM 1/2 Scale Fokker Triplane
RC Art http://www.MorganCycle.com 14"/1.75 inflatable front wheels and rim $20.00 each. I'm trying to paint the white wall don't know how long it will stay painted. Even thought of sanding down the tire to get rid of the tread. Good Luck. Jay
Posted on: 5/15/2012 1:25 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11081926

RE: GTM 1/2 Scale Fokker Triplane
1.7oz uncertified aircraft fabric and koverall. Using a combo of Nelson paint and Lowes exterior flat. I found 14" front bicycle wheels($40.00/pair) and built a bearing hub to suit my axle.
Posted on: 5/15/2012 12:41 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11081858

RE: GTM 1/2 Scale Fokker Triplane
Pics of the upper wing.
Posted on: 5/14/2012 8:24 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11081016

RE: GTM 1/2 Scale Fokker Triplane
Got the fuse covered and taped today, all the wings and tail feathers covered and painted. Need to mount engine and firewall next
Posted on: 5/14/2012 8:17 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11081008

RE: 1/4 Scale Stinson Reliant
Yes, it is a WH 1/4 scale.
Posted on: 5/14/2012 4:55 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11080750

RE: 1/4 Scale Stinson Reliant
Tom, It seems that we like alot of the same type of planes, hopefully family plans don't get in the way of Rhinebeck this year would like to talk in person.
Posted on: 5/14/2012 2:00 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11080582

RE: choosing a servo! i need help
In my opinion hitech makes some very good servos and resonally priced. Look into the karboite gear if you want strenght. Your ailerons should have fast servos with very little deflection, my 1/4 scale rolls with a 1/8 of an inch in movement, high tourqe for the rudder and do a pull-pull. Your main concern should be that you don't want to stall a servo.
Posted on: 5/5/2012 8:05 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11069880

RE: 33% Gee Bee Hostetler Build
My R2 is from a set of Haffke plans 1/4 scale increased to 1/2 scale
Posted on: 4/29/2012 8:17 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11061960

RE: 33% Gee Bee Hostetler Build
I knew that!!! Limbach 275cc twin carb Landing Gear built by a fellow hobbist.
Posted on: 4/27/2012 12:05 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11059249

RE: 33% Gee Bee Hostetler Build
Unfortunatly it has not flown yet, a bit of a problem getting engine started. This is a real airport (Wurtsborow Airport, Wurtsborow,N.Y.), I have use of the hanger and runway (concrete or grass ) when ready to fly.
Posted on: 4/26/2012 4:57 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11058243

RE: 33% Gee Bee Hostetler Build
this system allows me to load by myself.
Posted on: 4/26/2012 1:09 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11057893

RE: 33% Gee Bee Hostetler Build
For some reason could not send pics via pm
Posted on: 4/26/2012 1:03 PM by Author "wings2an3" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11057882

RE: Bare-bones beauty
Bones and sheeting 35% pitts and a Turner Special
Posted on: 4/16/2012 3:12 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11044642

RE: Bare-bones beauty
At the WRAM show in February. All wings are covered stitched and taped an waiting paint. Fuse and tail feathers are getting covered next.
Posted on: 4/12/2012 9:07 AM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11038963

RE: 1/3 scale FOKKER D8
My first D8 was open with cap strips as per plan, second was fully sheeted (scale) both built as one piece wings.
Posted on: 3/20/2012 3:34 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11008724

RE: 1/3 scale FOKKER D8
you were talking about thrust of engine. Stab incidence is set by fuse. Can not remember incedence on wing if not on planes set at 0, same goes for the sub wing
Posted on: 3/20/2012 3:16 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11008696

RE: 1/3 scale FOKKER D8
No down, no right. Check demensions on plan for the wing- original plans were off by one inch
Posted on: 3/20/2012 2:25 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11008637

RE: GTM 1/2 Scale Fokker Triplane
Approx weight 50 lbs as is. Hope to have it flying for the Ralley of Giants at Binghamton, NY
Posted on: 3/1/2012 3:45 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10983383

RE: Bare-bones beauty
a nekked body developing
Posted on: 1/26/2012 4:33 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10929507

RE: Krier Brothers Great Lakes Bipe Documentation
I belive Guillows made a kit which had the decals of their plane. Carstens plublication from Newton, NJ did an artical and a build. I built and have a 1/4 scale scratch built one, i will try to photo copy the article and spec sheets if you want. Jay
Posted on: 12/11/2011 6:25 PM by Author "wings2an3" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10854916