|
RE: Seagull 120 Cub.
the head will stick out the bottom of the cowling so that should not be a problem also the landing gear cross wires broke on mine twice I replaced the gear and it broke again on an easy landing so I fixed it my self. Get as much throw as you can on the rudder and use a choke severo michael
Posted on: 6/24/2012 6:49 AM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11129655
RE: Seagull 120 Cub.
I have A rcg 20cc on mine and is more then enough power for it iam using a 15/8 prop michael
Posted on: 6/23/2012 9:21 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11129380
RE: dle 20 choke
I dont have enough channels on my transmitter I using A hitec optic 6 2.4 I added A gyro to the tail michael
Posted on: 5/21/2012 1:23 PM by Author "michael wood"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11089152
RE: dle 20 choke
that looks great except my cub door is driffernt it bolts on but I like the way its set up and I will keep that in mind thanks michael
Posted on: 5/21/2012 9:36 AM by Author "michael wood"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11088864
RE: GY48V headklock gyro
Ihave it set up just that way thanks michael
Posted on: 5/21/2012 9:33 AM by Author "michael wood"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11088857
RE: dle 20 choke
guess I will run the choke rod out the front of the cowl thanks michael
Posted on: 5/15/2012 9:48 PM by Author "michael wood"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11082535
dle 20 choke
How do you set up a choke rod for this engine in a coweled airplane j3 cub michael
Posted on: 5/15/2012 7:46 AM by Author "michael wood"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11081433
GY48V headklock gyro
how maney use a gyro like this one on a cub? I fly tail dragers and this seagull 120 cub with a rcg 20cc on it is a real bear to take off. I know practice practice and throttle manangement on take off I was just thinking it would be easyer to do and not crash the airplane thanks michael
Posted on: 5/10/2012 8:56 AM by Author "michael wood"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11075807
RE: Need help with GP giant big stick with DLE 55
keep an eye on the elevator and rudder hinges I had to replace mine several times they broke just to let you know michael
Posted on: 4/26/2012 9:14 PM by Author "michael wood"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11058560
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Iam still waiting to see if I can order a landing gear for the cmp j3 cub 120 size michael
Posted on: 4/24/2012 9:18 PM by Author "michael wood"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11055666
RE: Need help with GP giant big stick with DLE 55
take some fuel tubing and slide it on your axels to create some friction on your wheels just enough to keep it from rolling at idle I read that tib bit here on rcu michael
Posted on: 4/18/2012 7:47 AM by Author "michael wood"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=11047070
RE: tail flying low
guess I was backwards in my thinking will try it this weekend as allways the people here on RCU are all knowing thanks michael
Posted on: 4/16/2012 7:58 PM by Author "michael wood"
in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=11045069
RE: tail flying low
its A high wing trainer
Posted on: 4/16/2012 10:08 AM by Author "michael wood"
in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=11044236
tail flying low
I have A question a person I fly with has a plane that flyes level and the tail is low and looks like the nose is flying a little up I know its A wing incidents problem some at the club say to increase the leading edge incidents I say increase the trailing edge incidents to lower the nose and bring up the tail I maybe wrong what do you all say michael
Posted on: 4/16/2012 8:32 AM by Author "michael wood"
in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=11044108
RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I looking for a landing gear of the j3 cub 120 thanks michael
Posted on: 4/13/2012 9:52 PM by Author "michael wood"
in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=11041115
RE: seagull j3 cub 120
yes you are right guess i over looked it must be getting old i have a call back to there support now thanks michael
Posted on: 4/2/2012 12:54 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11025357
seagull j3 cub 120
does anybody know of a good place to get a landing gear I thought about the nitro planes j3 cub landing gear but they dont stock it the problem is the first time i landed it today the gear brace broke just above where it was solidered I can fix it but i dont trust the gear if it broke that easy
Posted on: 4/1/2012 4:17 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11024133
RE: GP Giant Big Stik w/ O.S. 33GT!!
I have one it has a mt 35cc on it my question is has anybody had a problem with the elivator and the rudder hinges braking at the hinge pin it has happened to me twice iam using 4-40 control rods and when the engine is running i noticed there is a lot of viberation comming from the control rods so i changed them to 1/4 dowl rods with 4-40 ends and before you ask yes the prop is balanced and the hinges are heavy duty michael
Posted on: 3/20/2012 9:47 PM by Author "michael wood"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=11009128
RE: carbon fiber push rods
no sound if it is the sound of the engine is covering it up I can feel a vibration and see the elevator vibrate I just checked the prop balance and it was way off well see how that goes my other two gassers havent had a problem like this could flexing cause this sense there is no tail braces (wires ) michael
Posted on: 3/12/2012 4:04 PM by Author "michael wood"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10997524
RE: carbon fiber push rods
how do you put the 4-40 rod in?
Posted on: 3/12/2012 11:39 AM by Author "michael wood"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10997167
carbon fiber push rods
how do you make carbon fiber push rods and where do you all get them the problem i am having is on my gaint stik the push rods for the elevator and rudder are vibrating ( using 4-40 rods) ive have broken two hinges on the elevator twice and both times its the center hinges going to re check the prop balance iam using an mt 35 gas engine thanks michael
Posted on: 3/12/2012 9:28 AM by Author "michael wood"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10996968
RE: New kind of conversion for weed whackers
let me know when you get the ryobi adapter to work i would be insteristed in that michael
Posted on: 2/29/2012 9:21 PM by Author "michael wood"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10982466
RE: Balancing a giant Big Stik
I have an MT-35 on mine and had to add a lot of weight about a pound or so the weight wont hurt a thing just balance it level or slightly nose low depends on how you fly
Posted on: 1/22/2012 12:16 PM by Author "michael wood"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10921671
RE: Seagull's Piper J-3 Cub
still waiting on sevro extentions form sevro city so I finished up all that i could to include the c of g decals and all so I went and fired up the engine to prime it in stead of using a starter I removed the high speed needle and shot some fuel down it and reinstalled the needle at 1 3/4 turns and fliped it 3 times and it fired with the choke on, choke off flip 10 times and she fired up let it warm up and adjusted the high to max rpm and backed it off a bit then I let it run at about 3500 rpm for about 1/2 hour then set the low end and let it run transistion is good I will try to fly it next weekend michael
Posted on: 1/15/2012 3:09 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10910388
RE: Advanced sight of the RL-Comp Tempest
Hi Mike Good to hear from you. Happy New Year! Yes each elevator will have a servo. The stab will also be 1 piece like the Flash. Also, as the wing is a little thicker than the Tazor was, I can use standard servos on the flaps and ailerons. Chris
Posted on: 1/15/2012 9:06 AM by Author "Chris Leese-Wood"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10909856
RE: Advanced sight of the RL-Comp Tempest
The wings for the first Tempest are nearly done. I just have to work out the internal structure and get it CNC cut before fitting and joining the two halves. This would have been done today, but I decided to go flying instead[:D] Chris
Posted on: 1/15/2012 8:22 AM by Author "Chris Leese-Wood"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10909774
A few Pics from Debden
A few of us from the small but compact Debden Jet Club met up today for the second meet of the Year. Here are a few pics. As usual Mick managed to dwarf the rest of the models with his very impressive Fei Bao T33 and F15. Chris
Posted on: 1/15/2012 8:11 AM by Author "Chris Leese-Wood"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10909762
RE: seagull cub 120
cant mount it behind the fire wall unless i make a hatch
Posted on: 1/12/2012 9:53 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10906252
RE: seagull cub 120
got it mounted to the fire wall using eye hooks and rubber bands and fome pad but i think i might have an eye hook touching the box i will have to see michael
Posted on: 1/10/2012 9:27 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10902884
RE: Seagull's Piper J-3 Cub
i used the supplied fuel tank and re plumb it for gas. as far as the ignitoin box i mounted it to the front of the fire wall using rubber bands and eye hooks. I also used a sevro for the choke. I have tow gassers already. I hope to fire up the engine this week and check every thing out and adjust this engine the batteries i put over the cg. I just a little concerned about metal touching the ignition box. I still have to get some small clamps for the ignition lead dont like it to vibrate michael
Posted on: 1/10/2012 9:25 PM by Author "michael wood"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10902879
| 
