RE: Emaxx 3905 Spektrum steering Y-harness?
Found it.. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHFN4&P=7
Posted on: 11/20/2009 11:31 PM by Author "woodymaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9269079

Emaxx 3905 Spektrum steering Y-harness?
Hello I have an e-maxx 3905 and have a spektrum DX3R on the way for it and wondered how people have gotten the to servos to work with the one steering servo port on the receiver? I would imagine you would run a Y-harness. Any specific one needed? part numbers? thanks a lot!
Posted on: 11/17/2009 7:28 PM by Author "woodymaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=9261176

RE: Official E-Maxx Thread
Hi I have the new 16.8 truck and just put in my hv-maxx 4.5.. What gearing should I be running with this? Also what are some of the best lipos people have had good luck with.. Thanks.
Posted on: 9/9/2008 6:25 PM by Author "woodymaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=7937641

RE: ParkZone J-3 Cub RTF
This has probley been gone over already but I have the old cub and would like to change it over to the new stock brushless stuff. Do I have to get a new receiver or will the new brushless esc plug into the exesting one? Is there quiet a differnce in performace? Thanks
Posted on: 4/8/2008 6:05 PM by Author "woodymaxx" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=7352884

RE: Novak 5800 brushless quesion. Help!
Whats the cap
Posted on: 2/27/2008 1:54 PM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7145620

RE: Novak 5800 brushless quesion. Help!
Alright now the thing will not go unless you you push the car a little to get the motor turning. And if you sit there and throttle it for long enough without it going the esc gives up and and flashes the blue and green lights at ya for a second. Any ideas now?
Posted on: 2/26/2008 11:38 PM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7143512

RE: Novak 5800 brushless quesion. Help!
Ya, but I got it to work no I think the esc just got wet or something but its working great again!
Posted on: 2/21/2008 12:29 AM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7111138

Novak 5800 brushless quesion. Help!
Hello I have had this system for a couple of years now and today after I had been running a couple of minutes, it just started glitching. The motor just studders real bad forward and reverse just blips. I noticed the external capacitor is quite out of shap and looks almost like its been lightyly smashed... Which it wasn't. Do I just need a new capacitor or?
Posted on: 2/14/2008 3:08 PM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7075283

RE: Anyone know where I can cet some mesh wheels?
ah ya but those are only 22.4mm. I'll just get these.
Posted on: 2/9/2008 3:50 PM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7049262

RE: Anyone know where I can cet some mesh wheels?
Are thoughs the two peice ones? I found those on tower but there not 26mm for some reason. I did find a site out of japan that has them so I will most likely get them there.
Posted on: 2/9/2008 2:32 AM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7047228

RE: Anyone know where I can cet some mesh wheels?
Thanks but I'm trying to go for the old school look like the tamiya ones..
Posted on: 2/7/2008 12:55 AM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7037023

Anyone know where I can cet some mesh wheels?
Hi I am putting a japanese style drift car together and would like to find some wheels that are like this but not rediculisly priced! http://cgi.ebay.com/Tamiya-RC-Aluminum-MESH-Wheels-New-SKYLINE-GT-R_W0QQitemZ300187907017QQihZ020QQcategoryZ44022QQrdZ1QQssPageNameZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem Any help would be great! Thanks
Posted on: 2/6/2008 6:41 PM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7035073

XXX-S Questions
Hi I have just bought one of there chassis and I was woundering what servo saver would be fine for this car.. I am new to on road so.. And the guy who owned the car before cut the battery mounts off... What is the point of doing this and is there another way to mount the batterys? I tryed velcro but theres not enough on the chassis for it to stick to... By the way this is the graphite car. Anyways any help wound be great.
Posted on: 2/5/2008 11:01 PM by Author "woodymaxx" in the forum "RC Electric On-Road vehicles, race cars and more"
http://www.rcuniverse.com/forum/fb.asp?m=7031231

RE: Official E-Maxx Thread
So what has everyone found to be the best batterys? I am running a 4.5 brushless system and need some real good batterys. Is there a good site to shop for these at a decent price? Has anyone gone lithium?
Posted on: 9/3/2007 12:26 PM by Author "woodymaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=6321883

RE: Parkzone Typhoon 3D ?
Wow it seems like the parkzone set up is the cheapest way to go. Maybe if I bought the parkzone charger and got the cheap battery packs battery... Would it be a hassle matching the plugs? has anyone used the parkzone stuff?
Posted on: 7/3/2007 11:35 AM by Author "woodymaxx" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=6065831

RE: Parkzone Typhoon 3D ?
How do you keep them properly balaced? And what charger are you useing?
Posted on: 7/2/2007 3:43 PM by Author "woodymaxx" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=6062322

RE: Parkzone Typhoon 3D ?
how bout this one? http://www.hooobby.com/11v2200mah12c-high-performance-li-po-battery-t-plug-.html
Posted on: 7/1/2007 11:50 PM by Author "woodymaxx" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=6060141

RE: Parkzone Typhoon 3D ?
Hey does anyone know where you can get a li-po battery for this plane that is cheaper then the parkzone version and around the same specs?
Posted on: 7/1/2007 9:42 PM by Author "woodymaxx" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=6059616

RE: Official E-Maxx Thread
Does anyone have a 4.5 hv maxx they would like to sell? Or know where I can get one cheap? Thanks!
Posted on: 5/22/2007 4:37 PM by Author "woodymaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=5887853

RE: Official E-Maxx Thread
Hello I am going to be getting the hv maxx 4.5 for my truck. what should I get for the transmission to make it stand up to all the power?
Posted on: 5/15/2007 12:05 AM by Author "woodymaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=5856213

Emaxx transmission for sale?
Hi I was woundering if anyone had an emaxx transmission they would like to sell. thanks
Posted on: 12/8/2006 1:00 AM by Author "woodymaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=5089456

RE: Official Traxxas SledgeHammer Thread
well what is it called then where the a arms pin up to the chassis? or does anybody have the exploded view of the truck?
Posted on: 12/6/2006 11:45 PM by Author "woodymaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=5085318

RE: Official Traxxas SledgeHammer Thread
Hey I was running the sledge out in the cold and ran into my buddys truck. I busted where the front suspension arm connects to the truck and the top of the shock caps. Does anyone know what the a-arm connects to is called? is it the bulkhead 1630 or is it the casterblock 1632? or something else? I looked up the part on tower and there is no picture so theres no way to know. thanks
Posted on: 12/6/2006 10:49 PM by Author "woodymaxx" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=5085108

RE: Maxx Gasser Build Notes (Gas S-Maxx Conversion) Pics, Vid
Hello. I have given up on my maxx gasser and I will sell the engine and some of the t-maxx parts because I am making it electric now. Anyways pics of it are in my gallery pm me if interested. thanks
Posted on: 11/28/2006 6:02 PM by Author "woodymaxx" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=5050587

RE: Alternative motors for typhoon?
Ok thanks I tryed the typhoon thread on here and they didn't say anything. So I'll try out the other one then. thanks
Posted on: 11/22/2006 5:42 PM by Author "woodymaxx" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5027938

RE: Alternative motors for typhoon?
well what happens is you power up the motor and it runs fine until you jiggle the wires, then it makes a terrible grinding noise and stops all together. So I don't know whats up I'm figureing its a short.
Posted on: 11/22/2006 1:02 PM by Author "woodymaxx" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5027064

Alternative motors for typhoon?
Hello I have a parkzone typhoon 3d and I have a short in the motor wires that I can't hunt down... Anyways has anyone tryed some different motors for this plane other then the stock one. Maybe even one that doesn't use the transmission? Any info would be great thanks
Posted on: 11/20/2006 1:44 PM by Author "woodymaxx" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5018848

RE: ParkZone J-3 Cub RTF
Where do you hold the plane on the wing to find the cg. I'm rebuilding my plane and kinda need to know.
Posted on: 11/4/2006 11:48 AM by Author "woodymaxx" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=4954273

RE: Anyone know where I can find a Stingray body?
ah ok I see the new site. They have a 67 which is the older body style. I was look ing for 68-82. thanks though
Posted on: 11/2/2006 3:45 PM by Author "woodymaxx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4946953

RE: Anyone know where I can find a Stingray body?
it would be for an on road car. isn't bolink outta buisness.
Posted on: 11/2/2006 3:40 PM by Author "woodymaxx" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=4946936