RE: Should I buy dx6 or dx7 for 450se?????opinions please
Hiya, The Dx7 would be the better choice(got one in my Trex450SE)- Its more up to date than the dx6(got that in my other trex450xl!)- the dx7 comes with Standard size digitals which will not fit in the trex- suggest using Hitec 65 all round and Futaba 401/S9254 for tail-holds the rear end rock steady!!!- the dx7 is also faster as regards servo movement(latency) -got a much larger screen,rotating aerial and is basically a nice unit to use( looking foward to the DX9 though!!!!!!-) bear in mind you will have to buy your own charger(UK Models don't ship with one,maybe different for US??) and that it uses JR polarity-the centre pin on dx6/7 is negative... Also the dx7 is DSM2 which is better than the dx6(dsm) and finally,The dx7 is FULL RANGE,unlike the dx6 which is a parkflyer system. Check out the forums regarding the Spektrum,lots more info out there... Hope this helps!! 3dx..
Posted on: 2/17/2007 1:43 PM by Author "wot 4" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=5432538

RE: DX7 setup for T-Rex
Andrew- THIS is exactly what I was looking for-just bought myself a Spextrum DX7 which has replaced ALL my 35mhz gear as I'am fed up of all the glitches and noise that I got from my rex 450se- just out of interest,will these settings also work for my Trex 600 ??- I plan to use the AR6100 on the 450 and the AR7000 on the larger machine.. Thank again.... Lenny
Posted on: 1/24/2007 7:22 PM by Author "wot 4" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=5317945

RE: Reflection bipe!
flexabilty,unlike cyno which is quite rigid and cracks/shatters easy. wot 4..
Posted on: 5/2/2006 4:12 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4232625

RE: My typhoon 3D diary
with a ruined pack.... Just go and have fun[:)].. wot 4..
Posted on: 4/26/2006 6:51 PM by Author "wot 4" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=4210102

RE: brushless 370 outrunner in a mini funtana?
Pattern ).. wot 4..
Posted on: 4/26/2006 1:04 PM by Author "wot 4" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=4208951

RE: My typhoon 3D diary
to work with the original transmitter- other than that ,it's a really fun airplane to own.. wot 4..
Posted on: 4/25/2006 6:17 PM by Author "wot 4" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=4205873

RE: GP Flatana brushless
[;)][;)]... wot 4..
Posted on: 4/23/2006 12:47 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4200173

RE: BEST FOAMY FREE PLAN
I've built both and if you want something that flys similar to your shocky,go for the mini 3dx- I used a 2208/34 and 2cell setup-with a 10x4.7 this will fly outdoors in calm conditions- hover well easy and can do all the usual 3d stuff- the bipe is also good but because of the wingloading is'nt as nice as the 3dx-saying that,if you keep it light it will do the business-blenders and torque rolls especially good!!!!- You can use a 3cell setup on the 3dx but you will have to watch out for tail twist-use 3mm depron throughout and whats left of your shocky(carbon rods,linkages,etc.
Posted on: 4/23/2006 12:39 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4200149

RE: himax cobri combo????
If you got the box with the 3 ratio's,use the 6.6.1 setup and a 12x6 APCe prop- you willhave more than enough power,this is the setup I use on my overweight 3dx-mini funtana and most of the ones that I built from plans from www.3dfoamy.com.-try also FP Evo20c 1500-1800 lipo's- that lot will keep up with the glow boys!!!!
Posted on: 4/12/2006 2:38 AM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4155243

RE: Typhoon Plug And Play
with!.... Wot 4
Posted on: 4/10/2006 12:45 PM by Author "wot 4" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=4147564

RE: flat out models heeellllpp!!!!!!!!!!!!!!
)-hospitals and chemists will have it.. Will post vids as soon as I can reduce size... wot 4...
Posted on: 4/9/2006 11:56 AM by Author "wot 4" in the forum "Electric Aerobatic & Sport Planes"
http://www.rcuniverse.com/forum/fb.asp?m=4143467

RE: 3D tricks
Try www.teamflyingcirkus.com-used to be the old flying cirkus website that had vid's showing how to do various tricks like blenders,climbing flat spins,etc...
Posted on: 4/8/2006 7:00 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4141026

RE: Flatana Video
CJKLING-just finished building a Reflection as pre instructions-ie; with all the hardware-not impressed,plastic is nasty and breaks easy- Did you build yours standard or did you use tape(blenderm),reason i'am asking is that I got one yesterday at my local LHS (they were selling them cheep as nobody seems to be buying them!!!!).[:D]
Posted on: 4/6/2006 6:26 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4133108

RE: Review: Electric Katana EP RTF (includes photos and videos)
Hell,i've just watched it again and wondered if I could get a refund on my typhoon[8|][8|]-that ship really rocks!!!-in the UK,we've got high winds at the moment and this model would be perfect(imagine what its like in calm weather[:D]!!! I want one now!!!!!!!!!!!!!!!!!!!!!!!! Wot 4..
Posted on: 2/27/2006 8:11 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3969162

RE: Review: Electric Katana EP RTF (includes photos and videos)
Very nice vid!!! shame I just got a typhoon 3d on friday-this is a much better ship!!!!! wot 4..
Posted on: 2/27/2006 8:01 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3969102

RE: Flatana Motor Choice Help
That motor will do the job and it WILL outlast the plane[:D]-I used a axi 2208/34 and 3s lipo-on half power mine would do everything(I only fly outdoors)-full power was only used for verticals and insane punch out-don't get me wrong,the flatana's nice but its designed for flying,1 not so good landing and its bye bye!!-ditch the landing gear and use a prop saver... wot 4.
Posted on: 2/27/2006 7:47 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3969011

RE: Typhoon 3d
first flight[X(][X(] wot 4
Posted on: 2/27/2006 1:18 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3967261

Typhoon 3d
upgrading to EVO 20C 1800 and Axi power(my normal setup).... wot 4..
Posted on: 2/26/2006 3:42 PM by Author "wot 4" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3963362