RE: EXi 500 Tail Servo
sorry that servo is too small. Actually xhlei.com doesn't have a tail servo for exi 500. sorry You can use the Futaba S9257, that seems to be one of the best. ANdy
Posted on: 9/16/2010 5:26 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10007182

RE: ANDY EXI 600
no news yet sorry. Andy
Posted on: 9/16/2010 4:55 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10007120

RE: Esky belt cp v2
Well if they are not aligned correct, I suggest you loosen up the screw and press the pinon gear and the main gear tightly and then back away a tiny amount so that the gear have plays in between. Gear meshing is very important as it will affect the flying of the heli and may strip the main gear. Andy
Posted on: 9/16/2010 4:54 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10007118

RE: Flight Simulator...
Yes the sim we sell will do the trick. Since you have the better software, you might want to do some research and see if our controller will work with realflight software. Andy
Posted on: 9/16/2010 4:52 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10007112

RE: CNC G2/walkera 36 feather shaft
it's not the same and you can order it here: http://www.xheli.com/50h08-89.html sorry it's sold out but we should have it in 3 weeks. Andy
Posted on: 9/16/2010 4:50 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=10007108

RE: Blueray 450 Radio setup
ok setting up heli is easy only if you understand the principles behind. The best thing to do it watch a video and learn. see here: http://www.helifreak.com/showthread.php?t=132747 Andy
Posted on: 8/27/2010 8:17 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9964327

RE: No throttle
good find. Andy
Posted on: 8/27/2010 8:12 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9964318

RE: ANDY Lipo's
yes more lipos on our upcoming shipment and will arrive on or around 9/15. Andy
Posted on: 8/27/2010 8:11 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9964316

RE: Walkera 2801 like transmitters?
sorry eagle 50 and and g2 does not come with 2801 and to get that radio you will need to get this heli: http://www.xheli.com/walkera-4g3-brushless-rc-helicopter-2801-tx.html 2801 is a radio made by walkera and it's similar to dx7, at least that's what walkera claims. You can get more information on this radio at www.walkera.com Andy
Posted on: 8/27/2010 8:10 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9964312

RE: Falcon.X Tail Rotor problem.
The right rotor is controlled by the right joystick up and down movement so make sure you don't use that whenever you take off the heli. Andy
Posted on: 8/27/2010 8:04 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9964300

RE: BlueRay upgrades??
the gy48V is a good replacement gyro on our website. To get rock solid hold you must upgrade the tail servo to a better one such as this: http://www.hobbypartz.com/dmdise.html Andy
Posted on: 8/27/2010 8:02 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9964298

RE: feathering shaft
a small amount is a plus. Make sure you use the blue color ones and not he red ones. Andy
Posted on: 8/27/2010 7:58 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9964290

RE: BlueRay Tail Boom
It really depends on which EXI 450. This one is the same as the blue ray 450 http://www.xheli.com/exi450arfrar.html on the tail boom. Andy
Posted on: 8/27/2010 7:57 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9964289

RE: exi 450 belt pro wrong skids
missing landing skit sent via USPS 420066119101805213907507906351 Andy
Posted on: 8/27/2010 7:55 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9964285

RE: ANDY Lipo's
Batteries are coming in 2 weeks as we have a shipment that's due. oh yea for the star and hex driver, I've found one of each and mailed to you. No charge as you've waited and be patient with me on this one. Andy
Posted on: 8/12/2010 1:04 AM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9927841

RE: Honey Bee King 3 not working
Ryan, Sorry for the delay as I was out of town for a few days. I'll send you a TX for HB King 3 and I'll test it before I send it out. Andy
Posted on: 8/12/2010 1:00 AM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9927835

RE: Experiences buying from xheli.
And I did send you an return label. I send it to your original email and you said your email server failed on you so I send it to your gmail. Andy
Posted on: 8/12/2010 12:58 AM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9927829

RE: problem with esky honeybee cp3
No, blade tracking has nothing to do with 3d switch. So do not flip the 3d switch unless you know how to fly your heli inverted. Blade tracking can not be explained with few sentence so simply go to your tube and search blade tracking. There are tons of video on how to do that. Andy
Posted on: 7/26/2010 12:34 AM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9888407

RE: Honey Bee King 3 not working
ok I think your radio is have some problems. what's your order number? I'll send you a new radio. Once you have the new one just follow my procedure above to bind it. Andy
Posted on: 7/26/2010 12:32 AM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9888403

RE: esky Belt V2 battery
When charging lipo, your battery should not get hot so it's normal. To really check if the battery is bad, you'll need a measure the voltage. You 3 cell battery should be around 12.6V when it's fully charged. If the battery gets below 9V, one of the cell is bad. IF your battery shows 12.32, you are fine. The reason your charger is not turning green is because it's trying to balance each cell down to hundredths of volts for each cell and this process is very time consuming and it's not needed. If you run your battery down to 9.0V and charge it for 2.5 hours, your battery is pretty much charged. Andy
Posted on: 7/26/2010 12:30 AM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9888399

RE: Dynam E-Razor 450
Rick, I like your attitude and it's something that we all should have when we first approach this hobby. A helicopter will not crash itself and certainly can not fly itself, so the pilot has total control. You're getting there and you'll be hovering your heli in no time. Andy
Posted on: 7/16/2010 9:37 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9869875

RE: receiver troubles
what's your order number? I can help you locate one receiver. Andy
Posted on: 7/16/2010 8:07 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9869719

RE: Exceed G2 Tail Rotor or Transmitter issue??
Thanks Andy
Posted on: 7/16/2010 8:06 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9869716

RE: Honey Bee King 3 not working
ok without turning on the heli. Simply power ON the radio, does the red light ever go solid? If not, I think your radio is having problems. I'll send you a new one. Andy
Posted on: 7/16/2010 8:04 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9869712

RE: Dynam E-Razor 450
so what's your order number? I'll have you send the heli back and our tech will check on it. Andy
Posted on: 7/16/2010 8:02 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9869707

RE: EXI 250 Hex Driver
star drivers? what's this? Andy
Posted on: 7/16/2010 7:57 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9869698

RE: problem with esky honeybee cp3
well did you flip the 3d switch on because you should not flip this switch unless you are ready to fly 3d. Please do not turn the radio off while the helicopter is powered ON. What's your order number? Andy [quote]ORIGINAL: thematt22 so i got this heli a little while back and i replaced the blades with the esky carbon fiber blades and tracked them as per the manual.  after i did this the heli got possessed and wouldnt respond to the transmitter as it spun up but wouldnt stop or lift.  even after i shut the transmitter off it kept spinning!  then it decided to take flight also while the transmitter was off.  the 3-in-1 decided to catch fire at this point.  will xheli warranty this part im in the military and i dont actually get the heli until after the 30 day warranty is over due to the fact that i have it shipped to the ship im stationed on.  the receiver also burnt a little bit and i dont know if its good anymore. [/quote]
Posted on: 7/16/2010 7:55 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9869694

RE: feathering shaft
if your shaft has 2 screw, you need 2 x 1.5mm tool to counter rotate to lock it. It should be tight but not too tight that the blade holder is binding. Andy
Posted on: 7/16/2010 7:53 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9869692

RE: Subject EXI 250 Canopy
I think you can move the mounting holes on both side of the canopy back a little. Andy
Posted on: 7/9/2010 7:25 PM by Author "yadac123" in the forum "Exceed RC Support - Helicopter"
http://www.rcuniverse.com/forum/fb.asp?m=9854876

RE: EXI 250 Hex Driver
the exi 250 uses the 1.0mm hex driver, yes I got those too. if you want it I can send one to you. Order number? I can send it to you for $2. Andy
Posted on: 7/9/2010 7:22 PM by Author "yadac123" in the forum "XHeli.com Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9854872