RE: MLD-28 gasoline engine
I have a tuning question. I have the mld 28 running at 40:1 with klotz oil and 18x6 xoar prop. It sounds good and spins about 8100 rpms on the ground,when it is going vertical it sounds smooth but when I am flying strait and level at anything above half throttle it pops and crackles out the exhaust. If I richen it,it sounds worse when I lean it I lose rpms. Can one play with timing on this issue?
Posted on: 7/7/2009 11:52 AM by Author "zippyz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8913376

RE: Introducing the new 90-1.20 Yak QB
Well I am ready to pick my rx battery and I went through this thread. I went with hs-5645's for servos and a 2 cell li-po for juice on the mld-28,but what what are you guys running for your servos? I would like a 5 cell but trying to stay away from sub c size due to weight. Any input on mah and cell size would be great.
Posted on: 5/7/2009 12:51 AM by Author "zippyz" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8747453

RE: MLD-28 gasoline engine
I got my mld 28 but had to send back due to scoring on the cyl wall. I have been reading that some people are saying not to run anything over 6.0 volts on the cdi. If you read the manual it says a 2 call li-po will work and the cdi box says up to like 15 volts or something like that ,anybody have any input?
Posted on: 4/11/2009 12:24 PM by Author "zippyz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8670644

RE: Introducing the new 90-1.20 Yak QB
Thanks Jimeni,this is my first gasser so any help is welcome. This will be the largest in my fleet other then a Pusle 60 due to the car I drive. I will go with the mld28.
Posted on: 1/17/2009 12:45 PM by Author "zippyz" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8368654

RE: Introducing the new 90-1.20 Yak QB
Well I got mine and wow it looks nice. Hinges are a little tight and they don't travel all the way but I am hoping they will get better. Jimeni,how is the spe working out lately? I am looking at that one or the mld28 gas engine any prefrence? Hope this will be the king of the fleet for me!
Posted on: 1/16/2009 9:59 AM by Author "zippyz" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8364490

RE: Seagal Edge 540
.91fx here too. We tried a saito .72,.82 and .61fx and in the end we went to the .91
Posted on: 9/20/2008 9:55 PM by Author "zippyz" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7974130

RE: Dual elevator set up
The 9303 has a program just for split elevators,i have two planes with that set-up and it is VERY easy to do.As far as the 9c sorry can't help on that one but I will ask around.
Posted on: 6/3/2008 10:55 PM by Author "zippyz" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7577364

RE: *New Hanger 9 Pulse XT 60*
Thought about it but it"s a waist of my time. No biggy,fly the crap out of it and pass it along to someone else.
Posted on: 5/12/2008 10:53 PM by Author "zippyz" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7489136

RE: *New Hanger 9 Pulse XT 60*
Mine was missing parts also.Top hatch was glued down(had to cut off),holes in wheel pants don't line up so one points down the other points up,the screws that hold the cowl on don't match the threads in the blind nuts,had to replace throttle tube due to a large glob of glue inside the tube,elevater halfs are off by about 3/16 of an inch from one side to the other and with an os .61 I had to mount the battery back in the tail right behind the wing bolts.But all in all the covering job was nice.This is not my first plane either I have built close to 13 arf's and many of them being Hanger 9's this is by FAR the worst one,I think I will strip electonics and donate to our club for a beater plane.Thank god I work at a hobby store and didn't pay full price!!
Posted on: 5/12/2008 1:10 PM by Author "zippyz" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7486803

RE: seagull 46 size edge 540 anyone have one
I would like to know also.I have been looking at this for awhile and was wondering if a .61 would be to much. As far as the satio,I would go with the .82 it is only a few bucks more.I have the .82 in my funtana 50 and it works great.
Posted on: 3/7/2008 11:13 AM by Author "zippyz" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7189619

RE: Beware New H9 Ultra Stick 40
but the idea behind an ARF is to build and go fly,not halfway build,modify,grind away wood then go fly.Plus i have to look at it from a beginers point. I say hanger 9 has well built planes,he takes it home, trys building it and then back and beats me with it.I just think there quality is going down hill,i come across alot that have the hinge slots off centered,firewalls coming apart,and the planes folding in half(tribute).
Posted on: 8/17/2006 11:58 AM by Author "zippyz" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=4634227

RE: Beware New H9 Ultra Stick 40
same problem with rud-elev hitting,talked to horizon and they said i built it wrong!!This was about my 6th or 7th arf i've built.The kicker is i am the manager at the lhs that buys from there company and they still won't do anything about it.So i'am trying to put a little pressure on my rep. and we'll see what happens.
Posted on: 8/17/2006 12:37 AM by Author "zippyz" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=4632824