|
RE: Sound Control
The cops are on our side. [:D] They watched & listened to us fly and saw no reason for anyone to complain.
Posted on: 11/16/2009 12:24 PM by Author "zx32tt"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9257716
RE: Sound Control
We may have to do the same thing at our field. We have 1 irate neighbor that wants us to leave. The club has been in operation for over 20 yrs with out any issue. Yesterday the county police got involved. I don't know what the outcome will be.[:o]
Posted on: 11/16/2009 9:40 AM by Author "zx32tt"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9257387
RE: rebuild of a 4*40 kit???
1st off, I commend you for attempting this. If nothing else, you will find out what didn't work. You need at least 3 hinges on the rudder. You may have to cut away the part where the old hinges were and add new balsa in order to get the hinges where they need to be. CA hinges are fine on this size model. I would not increase aileron size much beyond the original size, mainly because the 4*40 is not a 3-D design and never will be. If you want a .40 size 3-d plane, build a Mojo or something similar. If you can find some K2-R spot remover, you may be able to clean up some of the oil soaked wood. I've used it before, but with mixed results. Good luck. Let us know how it turns out.[;)]
Posted on: 11/16/2009 7:40 AM by Author "zx32tt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9257199
RE: First Scratch-Built. Does it look like it could fly someday?
Looks like it will fly. I would go for a thicker airfoil though. zx32tt
Posted on: 11/16/2009 7:24 AM by Author "zx32tt"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9257180
RE: Power HD servos?
I have several of them in my H-9 Carden Yak. They seem to perform well. No centering problems, and plenty strong. Good value for the $$. zx32tt[:D]
Posted on: 11/16/2009 7:19 AM by Author "zx32tt"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9257175
RE: Sound Control
This is why I haven't gotten a response from AMA about this very issue! I only asked for reccomendations-guidelines, not a hard fast rule. 1 week later, still no response. zx32tt
Posted on: 11/16/2009 6:47 AM by Author "zx32tt"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=9257154
RE: Should Carden release a 50cc kit, and if so what airframe?
I doubt may people would be willing to pay $700 for a 50cc size kit, even if it was a Carden. There are so few kits available these days of any size, that are IMAC capable. Very few of us want to actually build anymore. zx32tt
Posted on: 10/6/2009 5:09 PM by Author "zx32tt"
in the forum "Carden Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9151842
RE: Painting resulted in a run
You might be able to work it out with a tool called a diamond nib. Its a small metal block imbeded with fine diamond dust, used to remove boogers from the finish coat. If it were mine, I'd probably just sand it out and re shoot it. zx32tt
Posted on: 10/6/2009 4:57 PM by Author "zx32tt"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9151812
RE: Solidworks files to DWG/DXF problems
This is a little after the fact, but it may be better to create your files with the DWGeditor in Solidworks. It behaves just like Autocad. Otherwise, you can save your solidworks files as .dwg as others have stated. You, or someone will need to edit the cut lines, so that the parts dont drop out from the sheets as they are being laser cut. zx32tt[8D]
Posted on: 10/2/2009 9:06 AM by Author "zx32tt"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9140843
RE: My own Sukhoi SU-29 and DL-50
Nice work happyfly2008. I tried to do a wing w/ ribs in Solidworks, and found it to be very difficult. For built up structures, I think compufoil or Profili2 are better suited for us modelers. Others have done it in Solidoworks, there is a thread on FG, but for me, I think I'll go with compufoil. Please keep us informed as you progress.[8D] zx32tt
Posted on: 10/2/2009 8:48 AM by Author "zx32tt"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9140801
RE: Using wood other than balsa
the wing if going this route. Good luck, and let us see your build. zx32tt[sm=shades_smile.gif]
Posted on: 10/2/2009 8:29 AM by Author "zx32tt"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9140758
RE: Looking for a career in aviation
You should look to one of the UAV sites. Most are out west, but I think there is also a group in Maryland or Va. Good luck
Posted on: 9/28/2009 4:50 PM by Author "zx32tt"
in the forum "Employment, Jobs, Help Wanted in Radio Control Industry"
http://www.rcuniverse.com/forum/fb.asp?m=9130668
RE: Building Surface
How in the world do you get cabinets like that for free?[sm=confused.gif] zx32tt
Posted on: 9/28/2009 9:53 AM by Author "zx32tt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9129611
RE: Building Surface
At present, I use a solid core door that I found. (free). I lay a sheet of 1/2"wall board on top and check with button thread for flatness. However, I'm thinking of going to a sheet metal top/ magenet system for the future.[:D] xz32tt
Posted on: 9/28/2009 9:20 AM by Author "zx32tt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9129528
RE: Anyone Else Having Trouble With Super Monokote?
or bad. zx32tt[sm=confused_smile.gif]
Posted on: 9/28/2009 8:49 AM by Author "zx32tt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9129463
RE: QQ Aircraft junk
tristock in the corners. zx32tt
Posted on: 8/12/2009 8:17 PM by Author "zx32tt"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=9011675
RE: Anyone Else Having Trouble With Super Monokote?
to tschuy, I've covered several planes using Coverite film. It is not as user friendly as Ultracote, but it does stay put, and holds up well. Like many others, I've experienced the same problems with the new formula monokote. I'm going to give the Hobby City covering a try. Many people see to like it. zx32tt
Posted on: 8/4/2009 8:07 AM by Author "zx32tt"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=8988654
RE: Second and 3rd plane.
Don't be such a girly man.[sm=cry_smile.gif] The 4* is a very gentle flying plane. Just make sure the cg is correct. Set up dual rates and some expo if you can. Take it up to altitude, and see what happens in a stall. You will be amazed at how slow this plane will fly. Get someone thats a good flyer to maiden it and get it trimmed out. No need to make it a 3rd plane. Just do it! zx32tt[8|]
Posted on: 7/16/2009 3:39 PM by Author "zx32tt"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8938800
RE: Aurora 9 radio
Hitec doesn't mention battery type and voltage for the TX. Will it be nicads or other? zx32tt
Posted on: 6/24/2009 1:18 PM by Author "zx32tt"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8877270
RE: Extra260 setup
Check your e-mail. zx32tt
Posted on: 6/22/2009 8:25 AM by Author "zx32tt"
in the forum "IMAC"
http://www.rcuniverse.com/forum/fb.asp?m=8870850
RE: Aurora 9 Video Walkthough now w/Heli
I want one NOW! I'm very impressed with the touch screen programing. zx32tt[:D]
Posted on: 6/22/2009 8:09 AM by Author "zx32tt"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8870832
RE: NEW SYSSA 30CC GASSER MADE IN THE USA
I've been reading this thread, and I hope all you nay sayers never try to bring a new product to life! Tyssa, you are to be commended for your effort, especially in todays economy. The market you target is a tough one, and I personally wish you well in your efforts. best of luck zx32tt
Posted on: 6/22/2009 7:20 AM by Author "zx32tt"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8870787
RE: Best servo gear life.....Titanium, MG, etc....
Hitec 7955's and 7950 (if they ever arrive). If you plane is shaking that bad, you need to find out why. Something is badly out of balance or bent. zx32tt [:D]
Posted on: 6/5/2009 7:15 AM by Author "zx32tt"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8827190
RE: Tuned pipe tuning problems
You may have better luck with lower nitro fuel. There are some guys up in Canada I think, that are Fox guru's. They even have a book, Fox out of the box. Try to get in touch with them. They will know EVERYTHING about your engine. zx32tt
Posted on: 6/1/2009 8:23 AM by Author "zx32tt"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8815807
RE: QQ 85
I'm still flying mine, and its the best plane I have. [:D] It is such a forgiving and predictable flyer. zx32tt
Posted on: 5/31/2009 12:27 PM by Author "zx32tt"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8813646
RE: New Hitec Aurora 9-Channel 2.4Ghz Radio System
Can I use the fm module from my Futaba 9C in the Aurora 9 and use all my 72mhz fm receivers, or do I have to use a specific Hitec fm module? zx32tt
Posted on: 5/21/2009 10:40 AM by Author "zx32tt"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8787290
RE: Aurora 9 radio
Are there any latency issues with the Aurora, like those present in the Futaba 9C? zx32tt
Posted on: 5/21/2009 8:55 AM by Author "zx32tt"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8787046
RE: What are you guys flying this season?
Mostly my QQ Yak 54, and My Staudacher S300. zx32tt
Posted on: 5/14/2009 8:29 AM by Author "zx32tt"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8767904
RE: OS 1.60 vs Super Tigre G2300
I had a ST 2300 and loved it. It was the newer Chinese version. With a perry pump, it was the one of the most reliable glow engines I ever had. No tuning problems at all, not 1 deadstick ever. I'd buy another one if needed to, and would not think twice about it. zx32tt [:D]
Posted on: 4/11/2009 4:10 PM by Author "zx32tt"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8671187
RE: Please HELP me choose my first Plane to Build
at the cad files, and you should be able to find one free on the net. Hope this helps. zx32tt
Posted on: 2/18/2009 11:23 AM by Author "zx32tt"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8490518
| 
